PLEASE NOTE THIS PRODUCT IS CURRENTLY ONLY AVAILABLE WITH A SOLIS INVERTER Part No: SOL-DLS-W3 Display - Web Interfaces The Solis Wi-Fi stick is a very clever, simple, external plug-in device, which is fully universal across the Solis inverter range. The S3 Wi-Fi Stick is faster, more responsive, and has an all-round better build quality. This 3rd Gen device includes 3 external LEDs to confirm connection status as well as a reset button on the outside Connect to up to 10 inverters with one S3 datalogger Quick Installation which only requires the installer to have a smartphone/laptop to hand; the only customer requirement is a WIFI network within range of the inverter. The unit provides a simple to install monitoring solution for end customers with access to web, iPhone, and Android app monitoring. In addition to free access to the monitoring website there is also an installer level login so the installer can view all their Solis inverters installed in one place. The unit provides a user friendly, easily accessible solution to inverter monitoring. Keywords: SOLDLSW, Display, Web Interface
£31.66 Exc. VAT
£37.99 Inc. VAT
Part No: GIV-GM120CT Display - Energy Meter The Modbus I.D Of The Meter Comes Preset As ID1 But Provides Functionality To Be Addressed Under 3 Different Modbus IDs ID1 - Import and Export meter ID2/3 - PV Monitoring meters 45/100 = 45A In-Line connected meter with a 100A CT Protection Class IP51 Dimensions (HxWxD) 119 x 17.5 x 62mm CT cable length - 150cm For any additional information on the new metering solution or if you need to reprogram the address of the meter on site, then please contact - support@givenergy.co.uk Please note: Currently this meter is not programmable we are awaiting an update from GivEnergy We awaiting information and documentation for this product Supplier Part No:GEM120CT Weight:0.2 kg
£44.55 Exc. VAT
£53.46 Inc. VAT
Part No: TS4-A-O Inverters - Optimisers PV Module Advanced Add-On/Retrofit The TS4-A-O (Optimization) is the advanced add-on/retrofit optimization solution that brings smart module functionality to standard PV modules for higher reliability. Improve energy efficiency by upgrading underperforming PV systems or adding smart features to new installations. The TS4-A-O with UHD-Core technology and expanded specifications supports PV modules up to 700W and a current of 15 A Tigo optimisers work with ANY inverter with at least one MPPT Easy Installation Snap to standard module frame or remove brackets for rack mounting Smart Commissioning Configure and commission with your Android or iOS mobile device Further information on the Tigo: https://www.tigoenergy.com/products/ target="_blank" Optimizers that do not have an internet connection have a limited warranty promise of 5 years. In combination with the CloudConnect Kit (CCA), the warranty increases to 25 years. Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication Supplier Part No: 462-00252-32 Weight: 0.54 kg Min PPT Voltage: 16 V Max PPT Voltage: 80 V DC Startup Voltage: 16 V DC Shutdown Voltage: 16 V Max Input Voltage: 80 V Max DC Power: 700 W Max AC Power (5 Minutes): 0 W Surge AC Power (1 Second): 0 W Max DC Current: 14.9 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4 Included Connectors: 1 Euro Efficiency: 0 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years
£35.12 Exc. VAT
£42.14 Inc. VAT
Part No: GIV-WIFI-DONGLE Display - Web Interfaces GivEnergy Wi-Fi dongle for real time monitoring when used with the APP Product Features Flexible monitoring through IOS and Android IP65 Easy configuration and install Monitoring points every 5 minutes USB port type with Micro SIM Card Supplier Part No: WiFi Dongle Weight: 0.13 kg
£41.20 Exc. VAT
£49.44 Inc. VAT
Part No: GIV-OBM-LORA-223 Display - Energy Meter LoRa data transmission terminals universal communication interface equipment. Allows for wireless transmission of RS485 data, cutting out the need for running long cables in complex installs. The system integrates two industrial standard RS485 interfaces and supports a variety of protocols to realise reliable data transmission between wired and wireless devices. Includes a pair of communicators (transmitter and receiver). Set as Channel 0 Key features: Small, easy to install Long-range, up to 8km barrier free Operating temperature range: -20 to 70 oC Please note: This device is not suitable for systems being installed under G100 Supplier Part No:GIV-LORA-LCD Weight:0.26 kg
£128.61 Exc. VAT
£154.33 Inc. VAT
Part No: GIV-LORA Display - Energy Meter LoRa data transmission terminals universal communication interface equipment. Allows for wireless transmission of RS485 data, cutting out the need for running long cables in complex installs. The system integrates two industrial standard RS485 interfaces and supports a variety of protocols to realise reliable data transmission between wired and wireless devices. Includes a pair of communicators (transmitter and receiver). Set as Channel 0 Key features: Small, easy to install Long-range, up to 8km barrier free Operating temperature range: -20 to 70 oC Please note: This device is not suitable for systems being installed under G100 Supplier Part No:GIV-LORA Weight:1 kg
£138.01 Exc. VAT
£165.61 Inc. VAT
Part No: GIV-SDM630CT Storage Systems - Storage Energy Meter GEM630 Meter - Modbus V2 Backlit three-line LCD display Three-phase monitoring Modbus output CT operated (programmable ratio) DIN-rail mounting Supplier Part No: SDM630CT Weight: 0.93 kg
£130.50 Exc. VAT
£156.60 Inc. VAT
Part No: SOL-METER-3PH-CT3 Display - Power Management Three phase meter with external CTs for Export Limitation with Solis 3-phase inverters. This Solis meter is an exceptional device that allows the calculation of electricity consumption on selected inverter models, you will be able to manage the electric demand perfectly for export limitation and adherence to grid regulations. Product features Temperature measurement Remote communication and Control Measurement of various electrical parameters NB. This meter should be used with single inverter deployments only. Compatibility Full 24hr net power and consumption monitoring with export limitation: Solis 4G 3-Phase 5kW to 20kW Inverters Solis S5 3-Phase 5kW to 60kW Inverters (Series 5) Only PV production monitoring and export limitation: Solis 5G 3-Phase 25kW to 40kW Inverters Solis 4G 3-Phase 50kW and 60kW Inverters Solis 5G 3-Phase 80kW and 110kW Inverters Accessories For monitoring with Solis Cloud a Solis LAN or Wi-Fi data logging stick is required. SOL-DLS-LAN - Data Logging Stick - wired LAN SOL-DLS-W - Data Logging Stick - WiFi Comes supplied with 3x 150A:5A CTs. When deploying with 110kW Inverter, CT upgrades are required - 200A:5A This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Supplier Part No:SOL-METER-3PH-CT3 Weight:1.68 kg
£117.90 Exc. VAT
£141.48 Inc. VAT
Part No: SOLAX-WIFI Display - Web Interfaces The SolaX Pocket WiFi V2.0 dongle connects to a local network to enable access to the SolaX Cloud monitoring platform. This must be within 50m of the installation to enable connection, for a greater range please see the SolaX Pocket WiFi plus. Compatibility X1-Mini G3.0 and previous X1-Boost G3.2 and previous X1-Hybrid G4.0 and previous X3-Mic / Pro G1 X3-Hybrid G4.1 and previous Features Quick installation with 'Plug & Play' function IP65 protection rating Stable data transmission and good reliability Low profile and nice exterior
£18.15 Exc. VAT
£21.78 Inc. VAT
Part No: SOL-S2-WL-ST Display - Web Interfaces The Solis 2-in-1 datalogger is suitable for areas covered by Wi-Fi or LAN signals, data collection is faster, wider, and more reliable by uploading directly through to Solis Cloud. Supports Wi-Fi or LAN communication Plug and play - convenient and fast Fault alarm, real-time monitoring LED Status indicators for Power, Network, and Inverter Communication Reset button - one key to send data for convenient debugging 4-pin connector for COM port on all Solis inverters 2-year standard Solis accessory warranty. Supplier Part No: SOL-S2-WL-ST Weight: 0.16 kg
£59.30 Exc. VAT
£71.16 Inc. VAT
Part No: SOL-5-IN-1-RS485 Display - Web Interfaces If you need to collect data from multiple inverters this cable helps you to establish a communication connection between the inverters. This cable helps you to connect multiple inverters in daisy chain. Just connect the cable in the inverter RS485 port from inverter 01 to 05. Distance between inverter links is 2.5m Supplier Part No: SOL-5-IN-1-RS485 Weight: 0.94 kg
£44.45 Exc. VAT
£53.34 Inc. VAT
Part No: FE-LAN-STICK Display - Web Interfaces The FoxESS Lan stick is used in place of the Wi-Fi dongle if a wired connection from inverter to the internet is required. The FoxESS LAN stick is compatible with the following FoxESS inverters: FoxESS KH 10kW FoxESS AIO 6kW Supplier Part No:LAN Dongle Weight:0.15 kg
£47.70 Exc. VAT
£57.24 Inc. VAT
Part No: SE-LTE-B-R0-GLO-V-S0 Display - Remote GSM Monitoring Cellular Plug-IN CELL-B-R0-GLO-V-S0 Cellular Interent Connectivity for Commercial and Residential Installations Compatible with SetApp-enabled inverters Connects SolarEdge inverters wirelessly to the internet No need for internet infrastructure at site Installed within the inverter enclosure for outdoor resilience, or in the communication gateway Supports high bandwidth monitoring of inverters, optimizers, batteries, meters and weather stations Enables remote analysis and troubleshooting Supplier Part No: CELL-B-R0-GLO-V-S0 Weight: 0.007 kg
£101.10 Exc. VAT
£121.32 Inc. VAT
Part No: SE-CT-SPL-100A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second SolarEdge have improved the design of their 100A and 250A Split-Core CTs to reduce the size and improve installation experience. The new 100A CT SECT-SPL-100A-A is a 1:1 replacement for the previous 50A and 70A CTs. Thus, one CT will cover the full range from 50A to 100A installations, instead of 3 different CT products required until now. Supplier Part No: SECT-SPL-100A-A Weight: 0.24 kg
£35.70 Exc. VAT
£42.84 Inc. VAT
Part No: EN-EFM-35MM Inverters - Micro Inverter Mounting Makes Enphase Microinverters Compatible with Railless and Ballasted Systems Bolts microinverters directly to the module frame, eliminating design challenges with both residential and commercial systems Comes in two sizes that fit the majority of modules Faster Installations Bolt microinverters to module frames on the ground, then carry the complete module up to the roof for rapid, drop-in installation Simple, two-piece bracket attaches in three easy steps More Affordable Installing with the Enphase Frame Mount requires fewer parts than other frame mount solutions, saving you material costs Reduce labour costs with faster, more efficient installations Reliable The Enphase Frame Mount is made of anodized aluminium for a strong, rust-free bracket Engineered specifically for use with Enphase Microinverters Supplier Part No:EFM-35MM Weight:0.115 kg
£3.60 Exc. VAT
£4.32 Inc. VAT
Part No: TIGO-CLOUDCON-TAP Display - Web Interfaces Cloud Connect Advanced kit for intdoor use, including CloudConnectAdvanced, TAP and DIN rail power supply. CLOUD CONNECT ADVANCED (CCA) COMPACT DATA LOGGER Collect data from up to 900 TS4 units Supports wired and wireless networks Control monitoring and safety features Configure and commission with Tigo SMART app Monitor 3rd party devices via Modbus Can communicate with up to 7 TAPs TIGO ACCESS POINT (TAP) WIRELESS ACCESS POINT Collect data from up to 300 TS4 units Wireless mesh communication High definition sampling rate Scalable architecture Mounts easily on module frame without tools Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication. Supplier Part No: 344-00000-52 Weight: 0.41 kg
£171.00 Exc. VAT
£205.20 Inc. VAT
Part No: CT-100-SPLIT-ROW Display - Current Sensor Clamps Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered Supplier Part No:SPLIT-ROW Weight:1 kg
£25.45 Exc. VAT
£30.54 Inc. VAT
Part No: SOLAX-DATAHUB Display - Web Interfaces SolaX - Datahub 1000 The DataHub1000, a reliable device designed to effortlessly monitor and manage your site, particularly when equipped with multiple SolaX inverters. With its advanced power control features, this professional device ensures that your system is compliant with local grid requirements, enabling you to maximize control and efficiency. Experience remote monitoring, intelligent power control, and robust data storage, all tailored to enhance the performance of your energy system. Local & Remote monitoring Setting and upgrade of batch inverters Intelligent export control DRM control ripple control and etc. of batch inverters Support large-capacity data storage Support IEC104 protocol Supplier Part No: DATAHUB Weight: 0.44 kg
£320.00 Exc. VAT
£384.00 Inc. VAT
Single phase CHINT energy meter with CT clamp compatible to SolaX range. This Chint meter provides the added benefit of allowing the user to be able to observe the power, energy, voltage & current production of their inverter without the need to log on to the SolaX app. Must be utilised when using the SolaX AC inverter. Product Code: DDSU666-CT 200A/5A
£68.17 Exc. VAT
£81.80 Inc. VAT
The Pocket LAN V2.0 Dongle enables you to connect to your network via an ethernet cable, to connect to the SolaX cloud monitoring platform, allowing for a much more stable connection with less interference. This can prove a suitable solution for situations where WiFi can be difficult to connect to. Compatible with: X1-Smart X1-AC X1-FIT X3-FIT Key Features: Quick installation with 'Plug & Play' function IP65 protection rating Stable data transmission and good reliability Eco-green and modern design
£19.95 Exc. VAT
£23.94 Inc. VAT
Part No: SE1000-CCG-G-S1 Display - Plant Controllers Commercial Gateway SE1000-CCG-G-S1 All-in-one communication gateway: Wireless connections including optional WIFI, Zigbee and GSM plug-ins Environmental sensors support Power reduction interface Electricity meter reader Non-SolarEdge inverter data loggers Easy installation – DIN rail and wall mount Supplier Part No: SE1000-CCG-G-S1 Weight: 0.76 kg
£295.00 Exc. VAT
£354.00 Inc. VAT
Part No: SE-AP1045C-DG-01-FW2 Display - Communications SE-AP1045C-DG-01-FW2 SE-JUP-DIG-FLD-03 replacement. A digital board replacement for SE-3PH inverters as dictated by the accelerated loss of mains change programme (ALoMCP) Sold with part code: SE-MAN-01-00106-1.0 Supplier Part No: SE-AP1045C-DG-01-FW2
£155.60 Exc. VAT
£186.72 Inc. VAT
Part No: SE-CT-SPL-1000A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second Supplier part code: SECT-SPL-1000A-A Supplier Part No: SECT-SPL-1000A-A Weight: 0.688 kg
£85.90 Exc. VAT
£103.08 Inc. VAT
Part No: SE1000-RS485-IF01 Display - Communications Expanding Wired Connectivity Provides an additional RS485 port for enhanced communications Located within the inverter enclosure for outdoor protection. Suitable for installation in the SolarEdge Control and Communication Gateway. Reduces labor cost with simple and quick installation Allows daisy chain configuration of multiple RS485 buses for communications in commercial installations. Not suitable for SetAPP inverters (without screen)! Supplier Part No: SE1000-RS485-IF Weight: 0.035 kg
£48.96 Exc. VAT
£58.75 Inc. VAT
Part No: SE-WFGW-B-S1-RW Display - Communications The SolarEdge Gateway connects SetApp-enabled SolarEdge inverters to an internet router. This gateway is easy to install and configure using the SolarEdge app - SetApp. The antenna is locatated externally to the inverter and can support up to two repeaters for extended range. This wireless gateway supports up to 8 SolarEdge inverters on a single wireless network. To extend the range of this Wireless Gateway (Master), use up to 2 of the Wireless Repeaters (Slave) under the part code: SE-WFRPT-B-S1-RW Supplier Part No: SE-WFGW-B-S1-UK Weight: 0.12 kg
£42.35 Exc. VAT
£50.82 Inc. VAT
Part No: SE-CT-SPL-250A-A Display - Current Sensor Clamps This split-core current transformer offers outstanding accuracy and one-handed operation and is only for use in Indoor environments. The Sensor supports the following measurements: AC Current Amps (A). Note: This sensor is only for use with the SolarEdge Electricity Meter 1PH/3PH 230/400V SolarEdge Modbus Meter 1 second. SolarEdge have improved the design of their 100A and 250A Split-Core CTs to reduce the size and improve installation experience. Supplier Part No: SECT-SPL-250A-A Weight: 0.24 kg
£37.05 Exc. VAT
£44.46 Inc. VAT
Part No: SE-ANT-ZB-WIFI-03 Display - Web Interfaces Supplier Part No: SE-ANT-ZB-WIFI-03 Weight: 0.05 kg
£31.10 Exc. VAT
£37.32 Inc. VAT
Part No: EN-EFM-40MM Inverters - Micro Inverter Mounting Makes Enphase Microinverters Compatible with Railless and Ballasted Systems Bolts microinverters directly to the module frame, eliminating design challenges with both residential and commercial systems Comes in two sizes that fit the majority of modules Faster Installations Bolt microinverters to module frames on the ground, then carry the complete module up to the roof for rapid, drop-in installation Simple, two-piece bracket attaches in three easy steps More Affordable Installing with the Enphase Frame Mount requires fewer parts than other frame mount solutions, saving you material costs Reduce labour costs with faster, more efficient installations Reliable The Enphase Frame Mount is made of anodized aluminium for a strong, rust-free bracket Engineered specifically for use with Enphase Microinverters Supplier Part No: EFM-40MM Weight: 0.117 kg
£3.60 Exc. VAT
£4.32 Inc. VAT
Part No: SOL-EPM1-5G Display - Power Management Solis EPM 5G The control centre for smart energy management The Solis Export Power Manager is the ideal solution for smart energy management for both residential and commercial systems. The unit allows you to adjust export values to satisfy local network regulatory requirements. Energy management with the Solis export power manager allows for higher self-consumption and efficient use of the locally generated PV power. Easy to Use Active power limitation and control at the grid-connection point Automatic, intelligent control of loads with up to 10x Solis inverters Easy commissioning with the PV System Setup Assistant SolisCloud monitoring platform Only suitable for Solis inverters made after November 2019 Solis do not provide CT clamps with these devices and they must be sourced separately - the secondary current for the CT should be 5A Disclaimer: This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Please refer to the App note in Documents for setting up your EPM to your Wi-Fi network. Important This unit is for single phase inverters only Supplier Part No: SOL-EMP1-5G Weight: 2.1 kg
£274.40 Exc. VAT
£329.28 Inc. VAT
Part No: SE-AP1045C-DG-01-FW2 Display - Communications SE-AP1045C-DG-01-FW2 SE-JUP-DIG-FLD-03 replacement. A digital board replacement for SE-3PH inverters as dictated by the accelerated loss of mains change programme (ALoMCP) Sold with part code: SE-MAN-01-00106-1.0 Supplier Part No: SE-AP1045C-DG-01-FW2
£193.60 Exc. VAT
£232.32 Inc. VAT
Part No: HUA-SMART-DONGLE-4G Display - Web Interfaces Huawei Smart Dongle - 4G Mobile Network adapter SDongleA-03 (HUA-SMART-DONGLE-4G) is a smart communications expansion module that works with Huawei inverters: (SUN2000-3/4/5/6/8/10KTL-M0 Sun2000-12/15/17/20KTL-M0 SUN2000-60KTL-M0 SUN2000-100KTL-M1) to implement wireless communication between inverters and the management system through the 4G network. A Smart Dongle can be used for daisy chaining devices using RS485 communication (inverter daisy chained, or inverters connected with other devices). A maximum of 10 devices can be connected together. When multiple inverters are connected together, only one Smart Dongle or one SmartLogger is allowed. Supplier Part No: 02312EHS Weight: 0.09 kg
£156.00 Exc. VAT
£187.20 Inc. VAT
Part No: DTSU666-H-3PH-250A Display - Energy Meter Huawei Smart Power Sensor 3 phase DTSU666-H with 3x 250A CTs Smart Energy Meter can be used for export limitation using Huawei inverters. See G100 document for details. Please note current clamps should be sized according to incoming grid supply in the property (not size of the PV array), please check if these 250A CTs are sufficient before buying. Huawei Part Code: 20022249-001 Supplier Part No: 020022249-001 Weight: 1.5 kg
£129.00 Exc. VAT
£154.80 Inc. VAT
Part No: DDSU666-H-1PH-100A Display - Energy Meter Huawei Smart Power Sensor DDSU666-H With 1x 100A Current Transformer Measurement accuracy ＞class 1 within full temperature range Simple & Easy LCD display, convenient for users, easy to set and check Visual color identification for simple wiring Energy Efficient Overall power consumption ≤ 1 W Standard din-rail mounting of DIN 35mm Supplier Part No: DDSU666-H Weight: 1.5 kg
£89.10 Exc. VAT
£106.92 Inc. VAT
Part No: SOL-RF-LINK Display - Energy Meter Used for RF Communication between the inverter and router. Compatible with all Solis Inverters. This is a Solis data logging device consisting of two components: RF Kit (data logger – connected to router) and the RF stick/antenna (connected to inverter) This is an alternative way of connecting a Solis inverter to the internet, other than standard Solis WIFi or Lan stick. To be used specifically for residential installations. Connection is still wireless but over a different RF frequency, main benefit of this connection is if a customer changes their Wi-Fi router they do not have to set up connection to the Solis inverter again. They just unplug the RF Kit from the old router, plug it in to the new router and it all works automatically, no set up required. Supplier Part No: SOL-RF-LINK Weight: 0.21 kg
£53.35 Exc. VAT
£64.02 Inc. VAT
Part No: SOLAX-CTSA016 Display - Current Sensor Clamps CTSA016 CT Clamp for X1-AC-3.6 Supplier Part No: CTSA016 100A Weight: 0.3 kg
£46.70 Exc. VAT
£56.04 Inc. VAT
Part No: TIGO-TAP Display - Plant Communications The TAP (Tigo Access Point) is Tigo's latest wireless antenna. Is the improved model, it replaces the Tigo Gateway and has the same function. Like the Gateway, the TAP allows wireless communication between the Cloud Connect Advanced (CCA) and the TS4 optimizers (wireless communication between TS4 Optimisers and TAP and wired RS485 connection between TAP and CCA). Tigo TAP utilises ‘mesh’ technology which allows each Tigo TS4 optimiser to act as a repeater, extending the range of TAP. The signal and data can hop from TS4 to TS4 along many different paths. As long as the TS4 optimisers are not more than 10m from each other, the TAP total range including ‘hops’ is 35m. For details on differences between Gateway and TAP please follow the link to Tigo website. Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication Supplier Part No: 158-00000-02 Weight: 0.23 kg
£42.00 Exc. VAT
£50.40 Inc. VAT
Part No: SOL-S3-GPRS-ST Display - Web Interfaces Plug and play, quick installation Fault alarm, real-time monitoring Plug and play, convenient and fast Status indicator, easy to display working status RESET button, one key to send data, convenient debugging D Supplier Part No: SOL-S3-GPRS-ST Weight: 0.084 kg
£36.85 Exc. VAT
£44.22 Inc. VAT
Part No: SOLAX-WIFI-3.0 Display - Web Interfaces Enhance your SolaX installation by connecting it to the SolaX Cloud. This Black WiFI dongle V3 allows an wireless connection to be made to the Internet router. This is ideal when running a cable isn't possible. One dongle is needed per SolaX inverter. Supplier Part No: SOLAX WIFI 3.0 Weight: 0.2 kg
£24.50 Exc. VAT
£29.40 Inc. VAT
Part No: SOLAX-G4-LAN Display - Web Interfaces SolaX - Pocket LAN V3.0 Enhance your SolaX installation by connecting it to the SolaX Cloud. This LAN dongle allows an Ethernet cable connection to be made to the Internet router. Simple and robust communication. One dongle is needed per SolaX inverter. Supplier Part No: SOLAX LAN V3.0 BLACK Weight: 0.2 kg
£24.50 Exc. VAT
£29.40 Inc. VAT
Part No: SOL-CT-100A-10M Display - Current Sensor Clamps 100A Current Transformer for Solis single phase 4G, 5G and 6S range. This CT is required for export limitation feature of the inverters to work. Please note: This CT is for limiting the export of single phase inverters only and is not intended for use with the range of Export Power Managers. 33.3mA secondary current. Supplier Part No: SOLIS-4G-CT-10M Weight: 0.32 kg
£22.25 Exc. VAT
£26.70 Inc. VAT
Part No: EN-CT-100-SPLIT Display - Current Sensor Clamps Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered. PLEASE NOTE: This CT is suitable for 25mm meter tails. Supplier Part No: CT-100-SPLIT Weight: 0.27 kg
£15.57 Exc. VAT
£18.68 Inc. VAT
Part No: Q.HOME-CHINT-CT Display - Accessories To be used in combination with measurement instruments: ammeters, watt-hour meters, measurement units, control relays, etc. Weight:0.035 kg
£3.79 Exc. VAT
£4.55 Inc. VAT
Part No: HUA-SL-3000A Display - Dataloggers The Huawei Smart Logger 3000A is dedicated to monitoring and managing a PV power generating system. It converges all ports, converts protocols, collects and stores data, and centrally monitors and maintains. SMART IEC60870-5-104 for connections to third-party monitoring systems; USB and embedded web for data reading and software upgrade; Automatically detecting equipment and assigning RS485 addresses; Remote control of active & reactive power SIMPLE Up to 80 inverters feeding into one Smart Logger; Up to 30 devices per RS485 bus; Easy to install on walls, tabletops and rails mounting RELIABLE Max. reliable communication range of 1000m; Remote configuration, automatic set-up of RS485 addresses Now with built in SPD Compatible with older Huawei -V1 inverter range and newer -M0, -H1 inverter range. 3G/4G router built in - NOT IN UNITS OFFERED IN SOUTH AFRICA . Please refer to the documents tab for associated G100 certificates. Supplier Part No:SMARTLOGGER-3000A Weight:3.3 kg
£307.80 Exc. VAT
£369.36 Inc. VAT
Part No: FE-GSM-STICK Display - Web Interfaces The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also available via your smartphone or web portal. Supplier Part No:4G/GPRS Dongle Weight:0.14 kg
£66.80 Exc. VAT
£80.16 Inc. VAT
Part No: CT-500A Display - Current Sensor Clamps SCT36-500/5A Split Core Current Transformer 500A Current Transformer clamp Frequency: 50-60Hz Accuracy: ±1% between 20% - 120% Insulation voltage: 600V AC Maximum primary voltage: 5000V AC Dielectric strength: 2.5KV/1mA/1min Operating temperature: -15°C to +60°C Operating humidity: <85% Case material: PC / UL94-V0 Bobbin: PBT Core: Permalloy Internal structure: Epoxy Split core Current Transformer ( incl. fly lead ) Part No as per datasheet: SCT36-500/5A Keywords: Landis, Display, Current Sensor Clamp Supplier Part No:STCK35-500A Weight:0.44 kg
£28.95 Exc. VAT
£34.74 Inc. VAT
Part No: CT-200A Display - Current Sensor Clamps 200A Current Transformer clamp Split Core CT Series Frequency: 50-60Hz Accuracy: ±1% between 20% - 120% Insulation voltage: 600V AC Maximum primary voltage: 5000V AC Dielectric strength: 2.5KV/1mA/1min Operating temperature: -15°C to +60°C Operating humidity: <85% Case material: PC / UL94-V0 Bobbin: PBT Core: Permalloy Internal structure: Epoxy Split core Current Transformer ( incl. fly lead ) Part No as per datasheet: SCT24 200\5 Keywords: Landis, Display, Current Sensor Clamp Supplier Part No:SCT24-200A Weight:0.26 kg
£28.95 Exc. VAT
£34.74 Inc. VAT
Part No: CT-100A Display - Current Sensor Clamps 100A Current Transformer clamp Split Core CT Series Frequency: 50-60Hz Accuracy: ±1% between 20% - 120% Insulation voltage: 600V AC Maximum primary voltage: 5000V AC Dielectric strength: 2.5KV/1mA/1min Operating temperature: -15°C to +60°C Operating humidity: <85% Case material: PC / UL94-V0 Bobbin: PBT Core: Permalloy Internal structure: Epoxy Split core Current Transformer incl fly lead 100A Primary / 5 A Secondary Part No as per datasheet: SCT24 100\5 Keywords: Landis, Display, Current Sensor Clamp Weight:0.26 kg
£28.95 Exc. VAT
£34.74 Inc. VAT
Part No: JUN-BOX12 Display - Meter Enclosure Grey, plastic construction with a smooth face. Functional box with 12 cable entries for cable glands. IP55 IK07 Impact Resistance Plastic Construction Self-Extinguishing, Halogen-Free Material Fixing with Positioning Compensation Supplier Part No:151-808 Weight:0.44 kg
£10.47 Exc. VAT
£12.56 Inc. VAT
Explore our full range of photovoltaic products at Powerland, including premium-quality power management systems, switches, metres and essential accessories to help you build a complete energy system. For a bespoke package and quote, please contact our team today for a no-obligation quote.
