Photovoltaic

Part No: MC4-CRIMP-TOOL Tools - Accessories Crimping pliers for private use PV-CZM-BS   Suitable for the assembly of products approved by TÜV in small amounts. Simple crimping tool without locator and without spare parts (not possible to replace the inserts) Crimp cycles : 30’000 cycles guaranteed   Complete tool for the assembly of the original MC4.     part code 32.6025 PV-CZM-BS   PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY.   Important PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY. Supplier Part No: 32.6025 Weight: 0.59 kg

Read more less

Part No: MC4-SPAN Tools - Accessories Open-end spanner and unlocking tool MC4   To tighten and unscrew the cable gland and to open the locking device of the connection.ords: MC4SPAN, Stäubli, Tools, Accessory   Supplier Part No: 32.6024 Weight: 0.05 kg

Read more less

Part No: CS-T4-DT Tools - Accessories    Disconnect tool for the Tlian T4 connectors on Canadian Solar modules. This also works on the MC4 and H4 connectors/cables. 1 x T4-DT  Picture shows both sides of the disconnecting tool.   Supplier Part No: CS-T4-DT Weight: 0.02 kg

Read more less

Part No: MC4-CAP-MALE Cables - Accessories Snap-in lock   Supplier Part No: 32.0716 Weight: 0.019 kg

Read more less

Part No: MC4-CAP-FEMALE Cables - Accessories Snap-in lock Supplier Part No: 32.0717 Weight: 0.005 kg

Read more less

Part No: JK03M Cables - Connectors PV Cable Connector: PV-JK03M/xy series   High security, only unbolt by tools. Low contact resistance. Retaining structure of nut to keep torsion valid. Resistance to ozone and ultraviolet radiation. Degree of Protection : IP68. Certification of TÜV, UL, and JET. Compatible with the first-generation product of JinKO.   Supplier Part No: JK03M Items in this pack: 2 Weight: 0.14 kg

Read more less

Part No: JA-QC4-10-35-1500V Cables - Connectors   Rated 1500V DC QC4.10-35 connector pair – Male and Female Required to comply with ‘IEC 62548:2016 - Photovoltaic (PV) arrays - Design Requirements’ regarding DC connectors inter-compatibility when using JA Solar modules supplied with QC4 connectors.   Supplier Part No: QC4.10-35 Connector Weight: 0.03 kg

Read more less

Part No: HQC4-PAIR Cables - Connectors HQC4 Connector pair (1x Male, 1x Female) for Q-Cells Supplier Part No: HQC4-PAIR Weight: 0.042 kg

Read more less

Part No: MC4-EVO2A-0316-FEM Cables - Connectors The MC4-Evo2A is the latest addition to the Stäubli Electrical Connector PV portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) MC4 Evo 2 Female cable coupler as individual part (including insulating part)   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL. THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.       DI comes with Maroon seal. Supplier Code: 32.0316P0001 Rated current: 45A 4mm2 and 53A 6mm2 cables Important The MC4-EVO2A-0316-FEM connectors are compatible with the MC4-EVO2-MAL1 connectors. Supplier Part No: 32.0316P0001 Weight: 0.013 kg

Read more less

Part No: MC4-CONN14-2-PACK Cables - Connectors A pack of 2x Male and 2x Female cable couplers. Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm²   Rated current: 39 A (for 4 and 6mm2 cable) Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min)  Cross section: 4 - 6 mm² Outer diameter cable (dA): 5,0 - 6,0mm  Please use correct MC4 approved tools to crimp these connectors on to bare cables.  Supplier code: 32.0014P0001-UR and 32.0015P0001-UR Keywords: MC4CONN2PACK, Multi Contact, PV Cable   Weight: 0.04 kg Rated Power: 250 W

Read more less

Part No: EN-Q-DCC-2-INT Cables - Connectors Enphase DC adaptor to MC4 (max voltage 100V DC).  Single part.  The DC adaptor is already included with the IQ7 inverter range. This partno is the adaptor on its own in case of needing to replace a damaged or lost one.    Supplier Part No:Q-DCC-2-INT Weight:0.07 kg

Read more less

Part No: EN-Q-CONN-R-1F Cables - Connectors Field-Wireable Connectors   Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types   Supplier Part No:Q-CONN-R-10F Weight:0.05 kg

Read more less

Part No: MC4-2M-2 Cables - Pre Terminated Cables MC4 10M2, 1xMale, 1xFemale each cable, MC4.PV Cable, Pre Terminated Cable. Please note: 6mm cable may be substituted at the 4mm price when 4mm cable is out of stock. A mix of 4 and 6mm will be provided.   Supplier Part No: 96274 Weight: 0.27 kg Length: 2 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-10M-1 Cables - Pre Terminated Cables Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Supplier Part No: 32.00226-10M21 Weight: 0.58 kg Length: 10 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-5M-1 Cables - Pre Terminated Cables Snap-in lock     Supplier Part No: 32.0026-50021 Weight: 0.29 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-Y-CONN-FEM Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0334 Weight: 0.25 kg

Read more less

Part No: MC4-Y-CONN-MAL Cables - Connectors mC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0333 Weight: 0.25 kg

Read more less

Part No: EN-Q-25-10-3P-1 Cables - Cables Enphase Q Cable 3ph 1.3m Portrait (price per connector)   Supplier Part No:Q-25-10-3P-200 Weight:0.32 kg

Read more less

Part No: EN-Q-25-17-1   Cables - Single Phase AC Cable Enphase Q Cable 1ph 2.0m Landscape 60-cell (price per connector)   Supplier Part No:Q-25-17-240 Weight:0.312 kg

Read more less

Part No: MC4-SPL-2 Cables - Connectors MC-4 contact doubler - Pack of 2 Pairs MC-4 splitter kit, consisting of: 2 x MC-T splitter sockets (2 x female connectors, 1 x male connector) 2 x MC-T4 splitter plugs (2 x male connectors, 1 x female connector) For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SPL2, Stäubli, PV Cable   Supplier Part No: 95036 Weight: 0.25 kg

Read more less

Part No: MC4-10M-2PACK Cables - Pre Terminated Cables 2x10m cable, 1xMale, 1xFemale each MC4 Pre-terminated. Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Weight: 1.16 kg Length: 10 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: EN-Q-25-17-3P-1 Cables - Cables Enphase Q Cable 3ph 2.0m Landscape 60-cell (price per connector)   Supplier Part No:Q-25-17-3P-160 Weight:0.412 kg

Read more less

Part No: MC4-SPL-Y-CONN Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm² MC-4 splitter kit, consisting of: MC4-Y-CONN-FEM and MC4-Y-CONN-MAL For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SYPL2, Stäubli, PV Cable   Weight: 0.5 kg

Read more less

Part No: CABLE4-1-250 Cables - DC Cables 4 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-250 Weight: 14.81 kg Length: 250 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE4-1-500 Cables - DC Cables 4 mm², single-core, black, 500m NEW H1Z2Z2-K certified 500m solar cable with length label. Supplied on a reusable spool. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: 26036 Weight: 30 kg Length: 500 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE6-1-500 Cables - DC Cables 6 mm², single-core, black, 500m 500m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 6 mm²  (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.  Important Alternative cable is BC-CABLE6-1-500 Supplier Part No: 26038 Weight: 38 kg Length: 500 m Area: 6 mm2 Colour: Black Cores: 1 - N Max Current: 41 Max Voltage: 1800

Read more less

Part No: CABLE6-1-1000 Cables - DC Cables 6 mm², single-core, black, 1000m NEW H1Z2Z2-K certified 1000m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human.   Supplier Part No: CABLE6-1-1000 Weight: 74 kg Length: 1,000 m Area: 6 mm2 Colour: Black Cores: 1 - N Max Current: 41 Max Voltage: 1800

Read more less

Part No: EMP1-AZ Meters - Three Phase Generation Meters Part of the Emlite three phase metering range which offers superb meters for a wide range of applications where basic metering is needed. They are of high quality and  sturdy construction with features normally found in more expensive meters. Product Features Accuracy Class A and B 4 quadrant energy measurement Optional power quality information Configurable pulsed outputs Clear and easy to read LCD display Solid Brass terminals Optional finger guard for main terminals Does not come with CT's. Supplier Part No: EMP1-AV Weight: 1.054 kg

Read more less

Part No: ISK-MT174 Meters - Three Phase Generation Meters The MT174 electronic three-phase meters are designed for measurement and registration of active, reactive and apparent energy and demand in three-phase four-wire networks Multi-tariff c\w internal time switch 120A Three Phase/Single Phase kWh meter OFGEM Approved - Import/Export Energy Tariff control input Small size modern design Pulse output Max Demand Low Profile   Supplier Part No: MT174-Direct Weight: 1 kg

Read more less

Part No: SDM120DB Meters - Single Phase Generation Meters SDM120D meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D - single direction range, work directly connected to a maximum load 45A AC circuit.  This SDM120DB version comes with a backlight making it easier to take readings  Active Energy Measured 45A Direct Connection Pulse Output 1 Module Wide 35mm Din Rail Mounting Measurements: H - 119mm W - 17.5mm D - 62mm Warning: This is a DIN rail mounted meter and will need to be housed in a DIN rail enclosure   Supplier Part No: SDM120DB Weight: 0.081 kg

Read more less

Part No: EM-ECA2 Meters - Single Phase Generation Meters Emlite Single Phase Total Generation Meter 100A with Pulse Output The ECA2 single phase meter is one of the worlds most compact metering units The meter provides measurement of active (kWh) energy in both import and export directions with registers shown on the large easy to read LCD display. The display features 8×3.5mm characters and can be configured to auto cycle any of the available registers or remain static with only a single register viewable   Part Code: ECA2.v     Does not come with CT's. Supplier Part No: ECA2VETC Weight: 0.305 kg

Read more less

Part No: KG32-T203-GBA294 Switches - AC Isolators Kraus & Naimer AC Switch Suitable for single phase AC connection. Plastic Enclosures, Protection IP66, totally insulated, knock-outs Handle red, in the OFF-position lockable with padlocks, Plate Backing grey Dimensions (w x h x d): 100mm x 190mm X 93mm Switch interlocked with lid to prevent opening in ‘ON’ position Keywords: 7, 7kW, KG32T203GBA294, Kraus & Naimer, Switches, AC Isolator   Supplier Part No: KG32 T203/GBA294 *KL Weight: 0.45 kg Rated Power: 7,360 W Poles: 3 Max Cable: 10 mm2 Max Voltage: 230 V Rated Current: 32 A Rated Voltage: 230 V

Read more less

Part No: PEDS150-EL25R-2 Switches - DC Isolators PEDS-EL Enclosure Series DC Isolator 25A Modular design, DC insulation voltage 1500V, compact structure IP66 box design, switch rotation operator with three lockable positions, to prevent misoperation Suitable for different specifications of waterproof cable connector The zero line bridge with angle design makes the connection easier With sufficient internal space and good heat dissipation effect, the whole machine can work under -40℃-70℃ with full load High - speed "on - off" switching mechanism, using energy storage spring, fast switching, maximum switching time is less than 5ms Contact self-cleaning design, reduce the resistance and energy consumption of DC switch, extend the life of switch Magnetic arc extinguishing and gate arc extinguishing are used to suppress the arc effectively Passed IEC / EN60947-3: 2009+A1+A2, AS60947.3, UL508I, GB / T14048.3, with TUV, CE, CB, SAA, UL certification   Supplier Part No: PEDS150-EL25R-2 Weight: 0.25 kg Poles: 2 Max Cable: 16 mm2 Max Voltage: 1,500 V Rated Current: 20 A Rated Voltage: 800 V Rated Current: 11 A Rated Voltage: 1000 V Rated Current: 25 A Rated Voltage: 600 V

Read more less

Part No: IMO-IS4P32-1P Switches - AC Isolators AC Isolator Switch  4 Pole Enclosed 32A AC Switch Isolator  IP65 Protection Rating (enclosure) EN 60947-3 Compliant Multiple Gland Knockouts Lockable Rotary Handle Flame Retardant External Mounting Points Additional Earth Connection Interlocked Enclosure Lid Measurements H - 125 W - 100 D - 85 D (including handle) - 120   Weight: 0.52 kg Rated Power: 22,144 W Poles: 3 Max Cable: 10 mm2 Max Voltage: 400 V Rated Current: 32 A Rated Voltage: 415 V Rated Current: 32 A Rated Voltage: 230 V Rated Current: 0 A Rated Voltage: 0 V

Read more less

Part No: IMO-IS4P32 Switches - AC Isolators AC Isolator Switch  4 Pole Enclosed 32A AC Switch Isolator  IP65 Protection Rating (enclosure) EN 60947-3 Compliant Multiple Gland Knockouts Lockable Rotary Handle Flame Retardant External Mounting Points Additional Earth Connection Interlocked Enclosure Lid Measurements H - 125 W - 100 D - 85 D (including handle) - 120  Supplier Part No: IS4P32 Weight: 0.52 kg Rated Power: 22,144 W Poles: 4 Max Cable: 10 mm2 Max Voltage: 690 V Rated Current: 32 A Rated Voltage: 415 V Rated Current: 32 A Rated Voltage: 230 V

Read more less

Part No: KG20-T104D Switches - DC Isolators Kraus & Naimer DC Switch Switch - Disconnectors, 2 pole - for single string             IP66/67 Protection             Black/Grey Padlockable Handle – lockable in the OFF-position             Class II compliant, Grey Insulated Enclosure             Switch Interlocked with lid to prevent opening in “ON” position             Rated for use in ambient temperatures of 50°C Plastic enclosures, protection IP66/67, totally insulated, knock-outs Black handle, grey plate packing Contact development: 2 pole, 4 contacts per circuit (2 x 2 in series) Dimensions (w x h x d): 85mm x 160mm X 82mm Supplier Part No: KG20 T104/D-P003 KL51V Weight: 0.48 kg Rated Power: 6,000 W Poles: 2 Max Cable: 6 mm2 Max Voltage: 920 V Rated Current: 25 A Rated Voltage: 450 V Rated Current: 21 A Rated Voltage: 500 V Rated Current: 20 A Rated Voltage: 650 V Rated Current: 18 A Rated Voltage: 800 V Rated Current: 11 A Rated Voltage: 920 V

Read more less

Part No: EUR-LB324P Switches - AC Isolators 4 Pole Enclosed 32A AC Switch Isolator.    Polycarbonate enclosure / UV resistant Padlockable in the OFF position for added security.    Height: 125mm Width: 100mm Depth: 74mm     Supplier Part No: LB324P Weight: 0.527 kg Rated Power: 7,500 W Poles: 3 Max Cable: 10 mm2 Max Voltage: 690 V Rated Current: 32 A Rated Voltage: 690 V Rated Current: 0 A Rated Voltage: 0 V Rated Current: 0 A Rated Voltage: 0 V Rated Current: 0 A Rated Voltage: 0 V Rated Current: 25 A Rated Voltage: 750 V

Read more less

Part No: IMO-SI16-PEL64R-2 Switches - DC Isolators IMO - SI16 - DC Isolator  IMO Solar Isolators are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations must be equipped with DC Isolators in accordance with IEC 60364-7-712. 2 Pole (1 string) IP66 Enclosure  Grey Body with Black switch Switching times of less than 5ms IMO patented "Safelock" function Dimensions (mm): 180x98x107   Supplier Part No: SI16-PEL64R-2 Weight: 0.5 kg Poles: 2 Max Cable: 10 mm2 Max Voltage: 1,000 V Rated Current: 16 A Rated Voltage: 600 V Rated Current: 16 A Rated Voltage: 800 V Rated Current: 0 A Rated Voltage: 0 V Rated Current: 0 A Rated Voltage: 0 V

Read more less

Part No: PEAS69-EL32R-4 Switches - AC Isolators PEAS69-EL Enclosure AC Isolator 32A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification   Supplier Part No: PEAS69-EL32R-4 Weight: 0.4 kg Rated Power: 7,360 W Poles: 4 Max Cable: 10 mm2 Max Voltage: 240 V Rated Current: 32 A Rated Voltage: 230 V

Read more less

Part No: IMO-IS4P20-1P Switches - AC Isolators This part is a special offer made up of the following items: Part   1 x IMO-IS4P20 IMO Stag AC Isolator 4 Pole 20 Amp   Stag AC Isolator Switch  3 Pole Enclosed 20A AC Switch Isolator  IP65 Protection Rating (enclosure) EN 60947-3 Compliant Multiple Gland Knockouts Lockable Rotary Handle Flame Retardant External Mounting Points Additional Earth Connection Interlocked Enclosure Lid Measurements H - 125 W - 100 D - 85 D (including handle) - 120   Weight: 0.52 kg Rated Power: 4,600 W Poles: 3 Max Cable: 10 mm2 Max Voltage: 230 V Rated Current: 20 A Rated Voltage: 230 V

Read more less

Part No: IMO-IS4P20 Switches - AC Isolators Stag AC Isolator Switch  4 Pole Enclosed 20A AC Switch Isolator  IP65 Protection Rating (enclosure) EN 60947-3 Compliant Multiple Gland Knockouts Lockable Rotary Handle Flame Retardant External Mounting Points Additional Earth Connection Interlocked Enclosure Lid Measurements H - 125 W - 100 D - 85 D (including handle) - 120   Supplier Part No: IS4P20 Weight: 0.52 kg Rated Power: 13,840 W Poles: 4 Max Cable: 10 mm2 Max Voltage: 690 V Rated Current: 20 A Rated Voltage: 230 V

Read more less

Part No: PEAS69-EL25R-3 Switches - AC Isolators PEAS69-EL Enclosure AC Isolator 25A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification   Supplier Part No: PEAS69-EL25R-3 Weight: 0.4 kg Rated Power: 5,750 W Poles: 3 Max Cable: 10 mm2 Max Voltage: 240 V Rated Current: 25 A Rated Voltage: 230 V

Read more less

Part No: KG20-T204-GBA486 Switches - AC Isolators Kraus & Naimer AC Switch Suitable for three phase AC connection. Plastic Enclosures, Protection IP66, totally insulated, knock-outs Handle red, in the OFF-position lockable with padlocks, Plate Backing grey Dimensions (w x h x d): 100mm x 190mm X 93mm Switch interlocked with lid to prevent opening in ‘ON’ position Keywords: 17kW, KG20T204GBA486, Kraus & Naimer, Switches, AC Isolator Supplier Part No: KG20 T204/GBA486 KL51V Weight: 0.48 kg Rated Power: 17,320 W Poles: 4 Max Cable: 10 mm2 Max Voltage: 690 V Rated Current: 25 A Rated Voltage: 400 V Established in 1907 in Austria, Kraus & Naimer has grown to be one of world's highest quality and largest switch manufacturer in the world. For over 100 years Kraus & Naimer have been manufacturing top quality electrical switches and now offer the widest range of solar photovoltaic AC and DC isolators on the market. Every solar PV system requires at least one DC disconnector to isolate the PV array from the input to the inverter and at least one AC disconnector to isolate the inverter from the mains supply. Choosing a well proven and high quality product for these small but vital parts of any PV system is essential and there is no safer choice than Kraus & Naimer.

Read more less

Part No: PYL-PC-H2-BATT Storage Systems - Li-ion Battery Pack Powercube series products with its modular design concept, enables the highest flexibility both for rack mounted and container based constructions, giving the flexibilities for customer to deploy the system. Configurable from units of 5 - 12 modules per system, the system can supply 240 - 864V for high Voltage applications.  Product features -Modular and Scalable         5 – 12 modules per rack and up to 6 racks in series -Flexible BMS voltage range         From 240VDC to 864VDC -LiFePO4 technology         For safety and long cycle life -High System Safety         BMS has charge, current and temperature protection -Flexible configuration options         Rack mounted or container-based systems Each Battery module comes with 1 x Communication Cable and 1 x Orange Power Cable NB. Please note:   A BMS unit and external cable kit is required for each individual stack of batteries.    A minimum of 5x battery modules is required for BMS operation.   For installations with two BMS units and more an MBMS is required.       You can register the Pylon Powercube for an additional 3 years of manufacturer warranty for free. Go to http://www.pylontech.com.cn/service/support and complete the information in the 'sign up battery' page.   Supplier Part No: H48074NA01V00101 Weight: 30 kg Battery Type: Lithium Ion Nominal Energy: 3552 Wh Depth of discharge: 90.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 1776 W Maximum Discharge Rate (5 Minutes): 3552 W Surge Discharge Rate (15 Seconds): 3552 W Maximum Charge Rate (5 Minutes): 3552 W Data Sheet Powercube H2

Read more less

Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack for Sunsynk CATL battery only.  Does not work with Sunsynk BYD battery.  Supplier Part No: Battery Cable Pack Long for Sunsynk Weight: 1 kg

Read more less

Part No: BAT-HAZ4 Storage Systems - Battery Hazard Labels Hazard label for battery.   Supplier Part No: 5758 Weight: 0.01 kg Length: 0 m

Read more less

Part No: HUAWEI-PWR-MGMT-250A-UK Power Management - Export Limitation 3ph This part is made up of the following items: 1 x HUA-SL_3000A Huawei Smart Logger 3000A   1 x DTSU666-H-3PH-250A Huawei DTSU666-H Three Phase Energy Meter with 3x 250A CT   Huawei Export Control Solution measures the active power at the point of connection to the distribution system, and then uses the information to control the inverters output power and balance the customer demand in order to control the export power to the distribution system for not exceeding agreed export capacity.  This system complies with UK G100 regulations with regards to reaction times and fail-safe functionality. This package is required for multiple Huawei inverters per site. Single inverter systems can limit export using DTSU666-H-3PH-250A meter only. Please note current clamps should be sized according to incoming grid supply in the property (not size of the PV array), please check if these 250A CTs are sufficient before buying.  Weight: 4.8 kg

Read more less

Part No: BOHAZARD-SET Labels - Hazard Labels This part is made up of the following items: 1 x BOHAZRD Hazard Label   1 x BOHAZ-ROOF PV on Roof Hazard Labels   This is a combination part containing both PV hazard labels BOHAZARD and BOHAZ-ROOF. Keywords: BOHAZARDSET, Portafix   Weight: 0.022 kg

Read more less