Solar Panel Fitting & Mounting Kits

Part No: ESD-1007227-B Mounting - Flat Roof FlatFix Fusion is Esdec’s modular and flexible mounting system for solar panels on small and medium-sized roofs. Its modular design enables a customized configuration to be created for every roof. FlatFix Fusion can be set up either in dual or single configuration. FlatFix Fusion is a 100% Dutch product that has proven itself for years. FlatFix Fusion side wind deflector Right, for use on South and East/West facing systems. Fixes directly onto the high base and low base by using 2 of the Self-tapping sheet metal screw (ESD-1008085). Pre drilled holes and unique starlock for easy installation. Available in Silver (ESD-1007227) Different width options for different modules. 

Read more less

Part No: ESD-1007226-B Mounting - Flat Roof FlatFix Fusion is Esdec’s modular and flexible mounting system for solar panels on small and medium-sized roofs. Its modular design enables a customized configuration to be created for every roof. FlatFix Fusion can be set up either in dual or single configuration. FlatFix Fusion is a 100% Dutch product that has proven itself for years. FlatFix Fusion side Wind Deflector Left, for use on South and East/West facing systems. Fixes directly onto the high base and low base by using 2 of the Self-tapping sheet metal screw (ESD-1008085). Pre drilled holes and unique starlock for easy installation. Also available in Silver (ESD-1007226) Different width options for different modules.   Supplier Part No: 1007226-B Weight: 1.164 kg

Read more less

Part No: REN-400554 Mounting - Flat Roof TS+ Support 20° This is the short vertical length of a Renusol TriSole+ frame. The two long lengths are ordered as REN-420550.    Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400554 Weight: 0.19 kg

Read more less

Part No: ESD-1004435 Mounting - Flat Roof FlatFix Fusion is Esdec’s modular and flexible mounting system for solar panels on small and medium-sized roofs. Its modular design enables a customized configuration to be created for every roof. FlatFix Fusion can be set up either in dual or single configuration. FlatFix Fusion is a 100% Dutch product that has proven itself for years. Fixed module End Clamp for FlatFix Fusion, for modules with a thickness of 35mm. Used in combination with mounting screws (ESD-1000655) or (ESD-1000670) Option for grounding/bonding in combination with Grounding clip (ESD-1007505) Available in Silver (ESD-1004335) See the "Application Note Esdec FlatFix Fusion End Clamp Table" document for possible combinations for different modules. Link to Esdec Training: https://academy.esdec.com/#/login

Read more less

Part No: ESD-1006519 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1006519 Weight: 0.006 kg

Read more less

Part No: ESD-1003070 Mounting - Washers   Supplier Part No: 1003070 Items in this pack: 50 Weight: 0.001 kg

Read more less

Part No: ESD-1000670 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1000670 Weight: 0.016 kg

Read more less

Part No: ESD-1008085 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1008085 Weight: 0.008 kg

Read more less

Part No: ESD-1008063 Mounting - Pitched Roof The Clickfit Evo roof hook filler rubber is made of high quality EPDM rubber. The balanced composition will dry out and prevent cracking. The rubber seal ensures a stable location of the Clickfit Evo roof hook on the roof tile. Placing an outflow rubber lowers the point load and makes superfluous unnecessary for pans with a water barrier. This keeps the flood defense and the strength of the roof tile intact. By folding the rubber a space of 5 to 15 mm can be filled.   Supplier Part No: 1008063 Weight: 0.033 kg

Read more less

Part No: ESD-1008020 Mounting - Pitched Roof The Clickfit Evo universal module clamp is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp comes standard assembled and is suitable for all framed solar panels with a thickness between 30 and 50 mm. Due to the clever design it can be used as a middle clamp and - in combination with the end cap - also as end clamp. The design also provides for potential equalization between the solar panels. The universal module clamp bites through the anodization layer of the solar panel and ensures that the solar panels are interconnected when the system is to be grounded. The clamps are standard equipped with theft delay screws and are available in the colors black and gray.   Supplier Part No: 1008020 Weight: 0.059 kg

Read more less

Part No: ESD-1008064 Mounting - Pitched Roof The Clickfit Evo installation aid is made of high-quality UV-stabilized plastic composite and is resistant to the prolonged exposure to sunlight and other weather influences. When using the installation aid, the solar panel can be hung on the ClickFit mounting rail. During the transfer of the solar panels, the cables of the solar panel can be clicked into the mounting aid. This provides considerable ease of assembly and contributes to working on the roof. The mounting aid is clicked into the existing mounting holes of the solar panel and is suitable for all solar panels.   Supplier Part No: 1008064 Weight: 0.01 kg

Read more less

Part No: ESD-1008045 Mounting - Pitched Roof Quick & flexible installation with the ClickFit EVO Universal Roof Truss Universal Roof Truss for all roof tile/batten combinations Easy mounting process from the top Stepless adjustment of height and width Better point load distribution, lower risk of tile breakage and leakage Self-aligning click connection: easier and faster Can be used for horizontal and vertical mounting Integrated cable management.   Supplier Part No: 1008045 Weight: 0.601 kg

Read more less

Part No: ESD-1008040 Mounting - Pitched Roof Quick & flexible installation with the ClickFit EVO Universal Roof Hook Universal Roof Hook for all roof tile/batten combinations Easy mounting process from the top Stepless adjustment of height and width Better point load distribution, lower risk of tile breakage and leakage Self-aligning click connection: easier and faster Can be used for horizontal and vertical mounting - Integrated cable management.   Supplier Part No: 1008040 Weight: 0.503 kg

Read more less

Part No: ESD-1007022-WP Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty Contains mounting in the new metal insert.   Supplier Part No: 1007022-WP Weight: 0.055 kg

Read more less

Part No: ESD-1003022-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1003022-B Weight: 0.018 kg

Read more less

Part No: ESD-1008061 Mounting - Pitched Roof The Clickfit Evo mounting rail connector is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The coupling piece makes it possible to combine several rails with each other and effortlessly slides into the side of the mounting rail. The ingenious design makes the use of screws superfluous. The combined mounting rails connect seamlessly. Thanks to the mounting rail connector, the carrying capacity and the strength of the mounting system remain unrivaled.   Supplier Part No: 1008061 Weight: 0.252 kg Length: 0.21 m

Read more less

Part No: ESD-1000612 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1000612 Weight: 0.005 kg

Read more less

Part No: ESD-1007012 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007012 Weight: 0.072 kg

Read more less

Part No: ESD-1008069 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008069 Weight: 0.006 kg

Read more less

Part No: ESD-1006500 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1006500 Weight: 0 kg

Read more less

Part No: ESD-1003022 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1003022 Weight: 0.018 kg

Read more less

Part No: ESD-1008065-B Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008065-B Weight: 0.014 kg

Read more less

Part No: ESD-1003015 Mounting - Flat Roof Quick and easy to install Unique click design Only one tool needed Also available in black Meets all international safety requirements   Supplier Part No: 1003015 Weight: 0.008 kg

Read more less

Part No: ESD-1004335 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1004335 Weight: 0.045 kg

Read more less

Part No: ESD-1000655 Mounting - Flat Roof   FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1000655 Weight: 0.014 kg

Read more less

Part No: ESD-1007031 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007031 Weight: 0.598 kg

Read more less

Part No: ESD-1008048 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008048 Weight: 0.065 kg Length: 0 m

Read more less

Part No: ESD-1008060-B Mounting - Pitched Roof The Clickfit Evo mounting rail end cap is made of high quality plastic composite and is therefore resistant to the long-term exposure to sunlight and other weather influences. The end cap ensures a beautiful and finished whole and a windproof closure of the mounting rail. The end cap, in combination with the universal module clamp, forms the end clamp. The end cap slides under the solar panel and removes the view of the mounting rail from the ground. When placing black solar panels, the use of black mounting rails is no longer necessary. The Clickfit Evo mounting rail end cap is available in the colours black and grey.   Supplier Part No: 1008060-B Weight: 0.031 kg

Read more less

Part No: ESD-1007194 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007194 Weight: 0.525 kg Length: 0.94 m

Read more less

Part No: ESD-1007505 Mounting - Flat Roof Complete modular system and aerodynamic design Single or dual-tilt (east-west) configuration Unique thermal break prevents damage to the roofing material For most modern solar modules (tilt angle 13 degrees) Easy to install around obstacles Meets all international safety requirements   Supplier Part No: 1007505 Weight: 0.001 kg

Read more less

Part No: ESD-1008065 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008065 Weight: 0.014 kg

Read more less

Part No: ESD-1007022 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007022 Weight: 0.252 kg

Read more less

Part No: ESD-1007196 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. FlatFix Fusion base profile panels 1114-1150mm width Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007196 Weight: 0.6 kg Length: 0.94 m

Read more less

Part No: ESD-1007272 Mounting - Washers   Supplier Part No: 1007272 Weight: 0.001 kg

Read more less

Part No: ESD-1008133 Mounting - Mounting Rails ClickFit EVO mounting rail 3242mm is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1008133 Weight: 1.974 kg Length: 3.49 m

Read more less

Part No: ESD-1008060 Mounting - Pitched Roof The Clickfit Evo mounting rail end cap is made of high quality plastic composite and is therefore resistant to the long-term exposure to sunlight and other weather influences. The end cap ensures a beautiful and finished whole and a windproof closure of the mounting rail. The end cap, in combination with the universal module clamp, forms the end clamp. The end cap slides under the solar panel and removes the view of the mounting rail from the ground. When placing black solar panels, the use of black mounting rails is no longer necessary. The Clickfit Evo mounting rail end cap is available in the colours black and grey.   Supplier Part No: 1008060 Weight: 0.031 kg

Read more less

Part No: ESD-1008033 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008033 Weight: 0.118 kg

Read more less

Part No: ESD-1004330 Mounting - Flat Roof FlatFix Basic is the predecessor of the FlatFix Fusion installation system. FlatFix Basic is suitable for mounting solar modules on flat roofs, both large and small. The modules can be tilted at a 15, 20 or 30 degree angle. Simple installation Solar modules in rows from left to right 3 possible tilt angles: 15, 20 and 30 degrees Suitable for most solar modules Meets all international safety requirements   Supplier Part No: 1004330 Weight: 0.043 kg

Read more less

Part No: ESD-1007226-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007226-B Weight: 1.164 kg

Read more less

Part No: ESD-1008049 Mounting - Metal Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008049 Weight: 0.243 kg

Read more less

Part No: ESD-1008020-B Mounting - Pitched Roof The Clickfit Evo universal module clamp is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp comes standard assembled and is suitable for all framed solar panels with a thickness between 30 and 50 mm. Due to the clever design it can be used as a middle clamp and - in combination with the end cap - also as end clamp. The design also provides for potential equalization between the solar panels. The universal module clamp bites through the anodization layer of the solar panel and ensures that the solar panels are interconnected when the system is to be grounded. The clampsstandard equipped with theft delay screws and are available in the colours black and grey.   Supplier Part No: 1008020-B Weight: 0.058 kg  

Read more less

Part No: ESD-1008035 Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008035 Weight: 0.159 kg

Read more less

Part No: ESD-1008090 Mounting - Metal Roof The Clickfit Evo installation aid is made of high-quality UV-stabilized plastic composite and is resistant to the prolonged exposure to sunlight and other weather influences. When using the installation aid, the solar panel can be hung on the ClickFit mounting rail. During the transfer of the solar panels, the cables of the solar panel can be clicked into the mounting aid. This provides considerable ease of assembly and contributes to working on the roof. The mounting aid is clicked into the existing mounting holes of the solar panel and is suitable for all solar panels.   Supplier Part No: 1008090 Weight: 0.49 kg

Read more less

 Part No: ESD-1008066-B Mounting - Pitched Roof ClickFit® EVO tiled roof, you can mount solar panels on all types of pitched tiled roofs. Thanks to the universal design, this system is way faster to mount and more convenient than other mounting systems. ClickFit EVO tiled roof is a convenient hook and click system. You no longer have to drill into the roof construction. The rails can be clicked into the roof hooks. That way, you only have to screw to fixate the solar panel clamps. ClickFit EVO tiled roof is made of high-quality aluminium and Magnelis coated steel. This steel type has a longer lifespan, is highly resistant to corrosion and features a self-healing coating.   Supplier Part No: 1008066-B Items in this pack: 2 Weight: 0.016 kg

Read more less

Part No: ESD-1008051 Mounting - Pitched Roof   Quick installation thanks to universal hook and click system Combine hooks and screws One tool approach High quality aluminium and Magnelis steel High corrosion resistance and self-healing coating Meets all international safety requirements   Supplier Part No: 1008051 Weight: 0.457 kg

Read more less

Part No: ESD-1007225 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007225 Weight: 1.05 kg

Read more less

Part No: ESD-1007041 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1007041 Weight: 0.028 kg

Read more less

Part No: ESD-1006580 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty    Supplier Part No: 1006580 Weight: 0.017 kg  

Read more less