INVERTERS FOR SOLAR / BATTERY STORAGE

 Part No: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter X1 RetroFit AC Charger Upgrade a PV system with the X1 RetroFit AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of Solax batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Supplier Part No: X1-FIT-5.0 Charger G4 Weight: 24.5 kg Rated Power: 5,000 W Data Sheet Solax X1 Fit EN

Read more less

Features of the Quattro 48/8000-110-100 Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.   Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.   Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.   Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more…   Want to have perfect control over your system from wherever you are whilst using your Quattro 48/8000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.   Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50   The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates.

Read more less

Part No: X3-HYBRID-G4-10.0-V2 Storage Systems - Hybrid Inverter High-efficient 150% PV oversized and 110% overload output Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking functio Economic Maximum 16A DC input current, support for high power solar panel Store the surplus energy from PV to battery Low start output voltage makes inverter longer working time Less energy loss on battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid G4 10.0 V2 with Wi-Fi & CT Weight: 34 kg Rated Power: 10,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 0 V Max Input Voltage: 950 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 10,002 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity : 0 Has Integrated DC Switch: No Data Sheet X3 G4

Read more less

 Part No: X1-AC-3.6 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Supplier Part No: X1-AC-3.6 Charger Weight: 18 kg Rated Power: 3,680 W Data Sheet Solax X1 AC coupled

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also available via your smartphone or web portal. Uses high voltage batteries IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% CT Clamps, meter and WiFi stick are included in the box   Supplier Part No: H1-5.0 (with EPS) Weight: 35.45 kg Rated Power: 5,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 75 V Max Input Voltage: 600 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 6,500 W Surge AC Power (1 Second): 7,200 W Max DC Current: 27 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

1 UNIT IN STOCK Part No: SOL-RHI-3P5K-HVES-5G-DC Storage Systems - Hybrid Inverter This is the perfect three phase hybrid solution for medium to large houses and business use as well.  Product features 2 x MPPT and 4 DC input at max of 26A 3 x operation modes Self-consumption; time of use; off-grid backup 4 models range from 5KW to 10 KW output as well as backup Supporting Li-ion high voltage batteries ranging from 160 to 600VDC Time of use shifting peak shaving capabilities to grid Intelligent EMS function Supporting three-phase imbalance 24-hour monitor and management system Remotely control and upgrade any selected inverter Supplier Part No: Solis-RHI-3P5K-HVES-5G-DC Weight: 25.1 kg Rated Power: 5,000 W Min PPT Voltage: 160 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 8,000 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 6,000 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.7 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet English

Read more less