If You Haven't Already Done So Register Here For Trade Account

Victron

19 products

  • Victron Energy BlueSolar PWM LCD&USB 12/24V 20A – SCC010020050

    Victron Energy BlueSolar PWM LCD&USB 12/24V 20A – SCC010020050

    Liquid crystal display For status monitoring and set-up Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs Maximum current (both outputs combined): 2A CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010020050 GTIN 8719076046202 Battery Voltage 12/24 V automatic system voltage detection Rated Charge Current 20A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP20 Dimensions H96 x W169 x D36mm Weight 0.15Kg Warranty 5 Years

    £30.29 Exc. VAT

    £36.35 Inc. VAT

  • Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 30A – SCC010030010-Powerland

    Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 30A – SCC010030010

    The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: With help of a computer and software With the dedicated BlueSolar Pro Remote Panel (see features below). Features Lighting control function, fully programmable. Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional external temperature sensor. – Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options See Remote Panel manual for details CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010030010 GTIN 8719076025399 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 30A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP30 Dimensions H200 x W100 x D57mm Weight 0.5Kg Warranty 5 Years

    £70.10 Exc. VAT

    £84.12 Inc. VAT

  • Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 20A – SCC010020110-Powerland

    Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 20A – SCC010020110

     The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: With help of a computer and software With the dedicated BlueSolar Pro Remote Panel (see features below). Features Lighting control function, fully programmable. Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional external temperature sensor. – Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options See Remote Panel manual for details   CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010020110 GTIN 8719076025382 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 20A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP30 Dimensions H160 x W82 x D48mm Weight 0.3Kg Warranty 5 Years

    £44.70 Exc. VAT

    £53.64 Inc. VAT

  • Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 10A – SCC010010010-Powerland

    Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 10A – SCC010010010

    The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: With help of a computer and software With the dedicated BlueSolar Pro Remote Panel (see features below). Features Lighting control function, fully programmable. Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional external temperature sensor. – Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options See Remote Panel manual for details CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010010010 GTIN 8719076025283 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 10A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP30 Dimensions H138 x W70 x D37mm Weight 0.13Kg Warranty 5 Years

    £25.45 Exc. VAT

    £30.54 Inc. VAT

  • Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 5A – SCC010005010-Powerland

    Victron Energy BlueSolar PWM Pro Charge Controller 12/24V 5A – SCC010005010

     The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: With help of a computer and software With the dedicated BlueSolar Pro Remote Panel (see features below). Features Lighting control function, fully programmable. Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional external temperature sensor. – Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options See Remote Panel manual for details   CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010005010 GTIN 8719076025252 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 5A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP30 Dimensions H138 x W70 x D37mm Weight 0.13Kg Warranty 5 Years

    £22.80 Exc. VAT

    £27.36 Inc. VAT

  • Victron Energy BlueSolar PWM LCD&USB 48V 30A – SCC040030050-Powerland

    Victron Energy BlueSolar PWM LCD&USB 48V 30A – SCC040030050

    Liquid crystal display For status monitoring and set-up Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs Maximum current (both outputs combined): 2A CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC040030050 GTIN 8719076046257 Battery Voltage 48V Rated Charge Current 30A Maximum Solar Voltage 100V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP20 Dimensions H101 x W184 x D47mm Weight 0.3Kg Warranty 5 Years

    £54.37 Exc. VAT

    £65.24 Inc. VAT

  • Victron Energy BlueSolar PWM LCD&USB 48V 20A – SCC040020050-Powerland

    Victron Energy BlueSolar PWM LCD&USB 48V 20A – SCC040020050

     Liquid crystal display For status monitoring and set-up Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs Maximum current (both outputs combined): 2A   CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC040020050 GTIN 8719076046240 Battery Voltage 48V Rated Charge Current 20A Maximum Solar Voltage 100V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP20 Dimensions H101 x W184 x D47mm Weight 0.3Kg Warranty 5 Years

    £47.64 Exc. VAT

    £57.17 Inc. VAT

  • Victron Energy BlueSolar PWM LCD&USB 48V 10A – SCC040010050-Powerland

    Victron Energy BlueSolar PWM LCD&USB 48V 10A – SCC040010050

    Liquid crystal display For status monitoring and set-up Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs Maximum current (both outputs combined): 2A CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC040010050 GTIN 8719076046233 Battery Voltage 48V Rated Charge Current 10A Maximum Solar Voltage 100V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP20 Dimensions H101 x W184 x D47mm Weight 0.3Kg Warranty 5 Years

    £39.70 Exc. VAT

    £47.64 Inc. VAT

  • Victron Energy BlueSolar PWM LCD&USB 12/24V 30A – SCC010030050-Powerland

    Victron Energy BlueSolar PWM LCD&USB 12/24V 30A – SCC010030050

    Liquid crystal display For status monitoring and set-up Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs Maximum current (both outputs combined): 2A   CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010030050 GTIN 8719076046226 Battery Voltage 12/24 V automatic system voltage detection Rated Charge Current 30A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP20 Dimensions H101 x W184 x D47mm Weight 0.3Kg Warranty 5 Years

    £50.56 Exc. VAT

    £60.67 Inc. VAT

  • Victron Energy BlueSolar PWM DUO-LCD&USB 12/24V-20A – SCC010020060-Powerland

    Victron Energy BlueSolar PWM DUO-LCD&USB 12/24V-20A – SCC010020060

    Features Liquid crystal display. For status monitoring and set-up External Temperature sensor included 2 Separate Battery outputs. Charges two separate batteries. For example, the starter battery and the service battery of a boat or mobile home. Protections. Protected against reverse polarity connection of the solar panels and/or battery Programmable battery charge algorithm. Algorithms for AGM, GEL or Flooded lead-acid batteries and LiFePO4 batteries (with internal BMS). Two 5 Volt USB outputs. Maximum current of the two outputs combined: 2A   CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010020060 GTIN 8719076046219 Battery Voltage 12/24 V with automatic system voltage detection [for LiFePO4 no automatic system voltage detection] Rated Charge Current 20A Second battery output Yes Load Output 2 USB ports 5V/2A Grounding Common negative Battery Temperature Sensor Yes, remote sensor [included] Protection Category IP20 Dimensions H101.5 x W184.0 x D47.1mm Weight 0.3Kg Warranty 5 Years

    £48.88 Exc. VAT

    £58.66 Inc. VAT

  • Victron Energy BlueSolar PWM LCD&USB 12/24V 10A – SCC010010050-Powerland

    Victron Energy BlueSolar PWM LCD&USB 12/24V 10A – SCC010010050

    Liquid crystal display For status monitoring and set-up Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs Maximum current (both outputs combined): 2A CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010010050 GTIN 8719076046189 Battery Voltage 12/24 V automatic system voltage detection Rated Charge Current 10A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP20 Dimensions H96 x W169 x D36mm Weight 0.15Kg Warranty 5 Years

    £23.82 Exc. VAT

    £28.58 Inc. VAT

  • Victron Energy BlueSolar PWM LCD&USB 12/24V 5A – SCC010005050-Powerland

    Victron Energy BlueSolar PWM LCD&USB 12/24V 5A – SCC010005050

     Liquid crystal display For status monitoring and set-up Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs Maximum current (both outputs combined): 2A CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010005050 GTIN 8719076046172 Battery Voltage 12/24 V automatic system voltage detection Rated Charge Current 5A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP20 Dimensions H96 x W169 x D36mm Weight 0.15Kg Warranty 5 Years

    £21.38 Exc. VAT

    £25.66 Inc. VAT

  • Victron Energy BlueSolar PWM Light Charge Controller 48V-30A – SCC040030020-Powerland

    Victron Energy BlueSolar PWM Light Charge Controller 48V-30A – SCC040030020

    Features Load output with low battery voltage disconnect function. Lighting control function, one timer only.  Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details   CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC040030020 Warranty 5 Years IP Rating IP20 Weight (kg) 0.17 Dimensions H95 x W140 x D33.5mm Battery Voltage 48V Rated Charge Current 30A Maximum Solar Voltage 100V Grounding Common positive

    £53.76 Exc. VAT

    £64.51 Inc. VAT

  • Victron Energy BlueSolar PWM Light Charge Controller 48V-20A – SCC040020020-Powerland

    Victron Energy BlueSolar PWM Light Charge Controller 48V-20A – SCC040020020

    Features Load output with low battery voltage disconnect function. Lighting control function, one timer only.  Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details   CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC040020020 Warranty 5 Years IP Rating IP20 Weight (kg) 0.17 Dimensions H95 x W140 x D33.5mm Battery Voltage 48V Rated Charge Current 20A Maximum Solar Voltage 100V Grounding Common positive

    £58.04 Exc. VAT

    £69.65 Inc. VAT

  • Victron Energy BlueSolar PWM Light Charge Controller 48V-10A – SCC040010020-Powerland

    Victron Energy BlueSolar PWM Light Charge Controller 48V-10A – SCC040010020

     Features Load output with low battery voltage disconnect function. Lighting control function, one timer only.  Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC040010020 GTIN 8719076025573 Battery Voltage 48V Rated Charge Current 10A Maximum Solar Voltage 100V IP Rating IP20 Dimensions H95 x W140 x D33.5mm Weight 0.17Kg Warranty 5 Years  

    £36.05 Exc. VAT

    £43.26 Inc. VAT

  • Victron Energy BlueSolar PWM Light Charge Controller 12/24V-30A – SCC010030020-Powerland

    Victron Energy BlueSolar PWM Light Charge Controller 12/24V-30A – SCC010030020

     Features Load output with low battery voltage disconnect function. Lighting control function, one timer only.  Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details   CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC010030020 GTIN 8719076025405 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 30A Maximum Solar Voltage 28V / 55V Grounding Common positive IP Rating IP20 Dimensions H70 x W133 x D33.5mm Weight 0.2Kg Warranty 5 Years

    £32.99 Exc. VAT

    £39.59 Inc. VAT

  • Victron Energy BlueSolar PWM Light Charge Controller 12/24V-20A – SCC010020020-Powerland

    Victron Energy BlueSolar PWM Light Charge Controller 12/24V-20A – SCC010020020

    Features Load output with low battery voltage disconnect function. Lighting control function, one timer only.  Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC010020020 GTIN 8719076025351 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 20A Maximum Solar Voltage 28V / 55V Grounding Common positive IP Rating IP20 Dimensions H70 x W133 x D33.5mm Weight 0.15Kg Warranty 5 Years

    £23.18 Exc. VAT

    £27.82 Inc. VAT

  • Victron Energy BlueSolar PWM Light Charge Controller 12/24V-10A – SCC010010000-Powerland

    Victron Energy BlueSolar PWM Light Charge Controller 12/24V-10A – SCC010010000

    Features Load output with low battery voltage disconnect function. Lighting control function, one timer only.  Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC010010000 GTIN 8719076025276 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 10A Maximum Solar Voltage 28V / 55V Grounding Common positive IP Rating IP20 Dimensions H70 x W133 x D33.5mm Weight 0.15Kg Warranty 5 Years

    £17.71 Exc. VAT

    £21.25 Inc. VAT

  • Victron Energy BlueSolar PWM Light Charge Controller 12/24V 5A – SCC010005000-Powerland

    Victron Energy BlueSolar PWM Light Charge Controller 12/24V 5A – SCC010005000

    Features Load output with low battery voltage disconnect function. Lighting control function, one timer only.  Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC010005000 GTIN 8719076025245 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 5A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect Grounding Common positive IP Rating IP20 Dimensions H70 x W133 x D33.5mm Weight 0.15Kg Warranty 5 Years

    £15.28 Exc. VAT

    £18.34 Inc. VAT

Forgot Password


Back to top