Welcome to Powerland Renewables!
Register for a Trade Account

Solar Panel Fitting & Mounting Kits

515 products

  • Solar Roof Universal Mid/End Clamp 30-46mm Black-Powerland

    Powerland Solar Roof Universal Mid/End Clamp 30-46mm Black

    Part No: ER-C-U30-46-B Mounting - Module Clips Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: CU30-46-B Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Black

    £1.19 Exc. VAT

    £1.43 Inc. VAT

  • Solar Roof Pro Rail 3500mm-Powerland

    Powerland Clenergy Solar Roof Pro Rail 3500mm

    Part No: ER-R-PRO-3500 Mounting - Mounting Rails The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers

    £17.90 Exc. VAT

    £21.48 Inc. VAT

  • Solar Roof Pro Rail Connector-Powerland

    Powerland Solar Roof Pro Rail Connector

    Part No: ER-SP-ST Mounting - Rail Connectors The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers

    £1.49 Exc. VAT

    £1.79 Inc. VAT

  • Middle Clamp+ 30 - 50mm Black-Powerland

    Powerland Middle Clamp+ 30 - 50mm Black

    Part No: REN-420082-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420082-BE Weight: 0.06 kg Clip Type: 199 Clip H: 51 mm Clip B1: 10.8 mm Clip Colour: Black

    £2.57 Exc. VAT

    £3.08 Inc. VAT

  • End Clamp+ 30 - 50mm Black-Powerland

    Powerland End Clamp+ 30 - 50mm Black

    Part No: REN-420081-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081-BE Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Black

    £2.94 Exc. VAT

    £3.53 Inc. VAT

  • Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover-Powerland

    Powerland Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover

    Part No: EM-ECA2-BI Meters - Single Phase BiDirectional Generation Meters Emlite Single Phase Bi-Directional (Import/Export) Total Generation Meter 100A with Pulse Output Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values.    NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.  This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)’  document released by OFGEM.   Part Code: ECA2.nz Important This is a bi-directional generation meter for hybrid inverters, please delete standard generation meter from your order if using this.  Supplier Part No: ECA2NET ETC Weight: 1.22 kg

    £35.81 Exc. VAT

    £42.97 Inc. VAT

  • VarioSole+ Rail connector for rail 41 x 35 mm-Powerland

    Powerland VarioSole+ Rail connector for rail 41 x 35 mm

    Part No: REN-400531 Mounting - Rail Connectors Technical Data: Dimensions: 195 x 24,1 x 30 Weight: 0.151kg Rail Length: 195,0mm Material: Aluminium Certification: TUV ID:48970; MCS012 IK0197/03 Useable with: VS+ Mounting rail 41 x 35mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400531 Weight: 0.15 kg

    £3.81 Exc. VAT

    £4.57 Inc. VAT

  • Fastensol L Bracket for fixing to Wood (not for use with hangers)

    Powerland Fastensol L Bracket for fixing to Wood (not for use with hangers)

    These useful aluminium L-brackets can be used to secure the mounting rails to various surfaces, including sheet-metal roof surfaces, felted roofs, concrete, or mounting units for flat roofs.

    £1.28 Exc. VAT

    £1.54 Inc. VAT

  • VarioSole + End Cap 41x35 rail Single - Black - Powerland Renewable Energy

    Powerland VarioSole + End Cap 41x35 rail Single - Black

    Part No: REN-900245-B Mounting - Rail End Caps End cap for VarioSole + 41x35 rail, black   Supplier Part No: 900245 Weight: 0.05 kg

    £0.74 Exc. VAT

    £0.89 Inc. VAT

  • VarioSole+ Mounting rail 41 x 35 x 4400 mm-Powerland

    Powerland VarioSole+ Mounting rail 41 x 35 x 4400 mm

    Part No: REN-400525 Mounting - Mounting Rails Renusol Mounting Rail, to be used with the VarioSole product range. Now supplied in longer, 4.4m lengths.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400525 Weight: 3 kg Length: 4.4 m

    £25.84 Exc. VAT

    £31.01 Inc. VAT

  • Wood screw pan head 6 x 80 SIT30 Single (900318) (Pack of 100)-Powerland

    Powerland Wood screw pan head 6 x 80 SIT30 Single (900318) (Pack of 100)

    Part No: REN-900318-100 Mounting - Wood Screws Wood screw pan head 6mm x 80mm SIT30  Bag of 100 Material - Stainless steel Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 900318-100 Items in this pack: 100 Weight: 0.9 kg  

    £35.36 Exc. VAT

    £42.43 Inc. VAT

  • VarioSole+ Mounting rail 41 x 35 x 3300 mm BLACK-Powerland

    Powerland VarioSole+ Mounting rail 50 x 37 x 3600 mm black

    Part No: REN-400570-B Mounting - Mounting Rails VS+ Mounting Rail 50 x 37 x 3600 mm - black 0,703 kg/m Material: Aluminum Certification: TÜV ID: 1111212485; MCS012 IK0197/03  Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400570-B Weight: 1.41 kg Length: 3.6 m Renusol GmbH based in Cologne (Germany) and is among the fastest  growing businesses on the European market for PV mounting systems. The manufacturer of high-quality mounting solutions is successful with its 4 core mounting options, VarioSole, MetaSole, InterSole and ConSole in many European countries.

    £56.34 Exc. VAT

    £67.61 Inc. VAT

  • Dektite Lead Multicable Solar Flashing (Tiled or Slate)-Powerland

    Powerland Dektite Lead Multicable Solar Flashing (Tiled or Slate)

    Part No: DNLS10MB Mounting - Cable Flashings Don't risk roof leaks and system failure through cable damage by pushing unprotected cables under the tiles or slates. The MCS Installation Guide for PV requires that "cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The use of a purpose made product is a durable means to achieve this". [p.75] The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects the cables from compression or damage from contact with roofing materials. Dektite Multicable DNLS10MB  * Purpose made product as per MCS  * Universal - fits all types of tile and slate roofs  * Quick and easy to instal - only tool needed cable snips  * Nu-Lead base [acrylic coated lead] for perfect dressing with profiled tiles. Safe handling, no staining.  * Base size 490 x 410mm, easily cut down if necessary  * Dektite quality EPDM seal protects up to 10 cables from compression or damage by isolation from contact with roofing materials  * Durable product backed by 20 year warranty and Deks 50 years experience in design and manufacture of roof flashings.   Supplier Part No:DNLS10MB Weight:2.69 kg

    £37.70 Exc. VAT

    £45.24 Inc. VAT

  • Elettro Brescia 4mm2 single-core DC cable 50m - Black - Powerland Renewable Energy

    Powerland Elettro Brescia 4mm2 single-core DC cable 50m - Black

    Part No: CABLE4-1-50 Cables - DC Cables 4 mm², single-core, black, 50m NEW H1Z2Z2-K certified 50m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety.    Supplier Part No: CABLE4-1-50 Weight: 2.675 kg Length: 50 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £33.66 Exc. VAT

    £40.39 Inc. VAT

  • Roof hook UK Flexible (without wood screw)-Powerland

    Powerland Roof hook UK Flexible (without wood screw)

    Part No: REN-420182 Mounting - Roof Anchor- Tile & Slates Renusol have created this roof hook specifically for the UK market. It is compatible with S-Shaped, Modern interlocking, Flat and Slate tiles, and can be used with the VarioSole product range.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420182 Weight:0.96 kg

    £9.07 Exc. VAT

    £10.88 Inc. VAT

  • Solar Roof Pantile Anchor Universal (Screws are not included)-Powerland

    Powerland Solar Roof Pantile Anchor Universal (Screws are not included)

    Part No: ER-I-PRO-01A Mounting - Roof Anchor- Tile & Slates The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers   Supplier Part No:ER-I-PRO/01A Weight:0.732 kg

    £6.46 Exc. VAT

    £7.75 Inc. VAT

  • Fastensol 3550mm Black Rail

    Powerland Fastensol 3550mm Black Rail

    The mounting rails are the core of the system. For each row of panels, a pair of rails is mounted horizontally on the roof and supported by rook hooks at no more than 1.2m intervals. The distance between the rails should be around three-quarters of the panel height. The panels are then laid on the rails and clamped in place with the end and mid clamps. For long rows, simply join lengths of rail using the rail splice kits. Rails can be cut to length with a hacksaw or grinder. System features and specifications: Dimensions: 3550 x 50 x 29 mm Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: black MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd 561 rails per pallet cage

    £21.20 Exc. VAT

    £25.44 Inc. VAT

  • VarioSole + End Cap 41X35 rail Single - Grey-Powerland

    Powerland VarioSole + End Cap 41X35 rail Single - Grey

    Part No: REN-900246 Mounting - Rail End Caps Technical Data Material Dimensions Weight Compatible Components Average thicknesss 2,00 mm Colour: grey   41 x 35 x 15 mm 0,007 kg 400511, 400511-B, 400512, 400512-B, 400513, 1 x End cap (grey)     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900246 Weight: 0.004 kg

    £0.74 Exc. VAT

    £0.89 Inc. VAT

  • Renusol vertical flat solution with Genius flashing-Powerland

    Powerland Renusol vertical flat solution with Genius flashing

    Part No: FLAT-REN-GEN-V Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x  Roof hook UK Plain tiles/slates (without wood screw)   1 x  UK M8 Bracket 90°   1 x  Genius Roof - Flat Tiled Kit   Renusol plain roof anchor with Genius Roofing flat tile kit. This part contains:  - 1 x REN-420181 - 1 x GEN-FT-TILE - 1 x REN-420352   Weight: 0.97 kg

    £13.20 Exc. VAT

    £15.84 Inc. VAT

  • Clenergy Pro Rail Cap Black - Powerland Renewable Energy

    Powerland Clenergy Pro Rail Cap Black

    Part No: ER-CAP-PRO-B Mounting - Rail End Caps   Supplier Part No:ER-CAP-PROB Weight:0.007 kg

    £0.46 Exc. VAT

    £0.55 Inc. VAT

  • Solar Roof Pantile Anchor (Screws are not included)-Powerland

    Powerland Solar Roof Pantile Anchor (Screws are not included)

    Part No: ER-I-PRO-01 Mounting - Roof Anchor- Tile & Slates Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: I-PRO-01 Weight: 0.609 kg

    £5.87 Exc. VAT

    £7.04 Inc. VAT

  • Clenergy Self-drilling Universal Wood Screw 14-11 x 70 Hex Head-Powerland

    Powerland Clenergy Self-drilling Universal Wood Screw 14-11 x 70 Hex Head

    Part No: ER-US-6.3-70-BW-BX Mounting - Wood Screws Self-drilling Universal Screw, Buildex 14-11 x 70 Hex Head Zips Climaseal 5 with 16 mm ABW Supplier Part No: ER-US-6.3-70-BW-BX Weight: 0.002 kg

    £0.37 Exc. VAT

    £0.44 Inc. VAT

  • Fastensol Universal Clamp (for 30-46mm panels) - Black

    Powerland Fastensol Universal Clamp (for 30-46mm panels) - Black

    Mounting solar panels just got even simpler with this universal panel clamp from Fastensol. The clamp is spring loaded meaning that it is compatible with any panel  from 30-46mm thickness. Due to it's clever design, it is also both a mid and end clamp in one - simply rotate the head 90 degrees either way to swap between either. 80x to a small carton, 320x to a large carton.

    £1.38 Exc. VAT

    £1.66 Inc. VAT

  • Fastensol Rubber Rail End Cap (Black)

    Powerland Fastensol Rubber Rail End Cap (Black)

    These end caps for our mounting rail add the perfect finishing touch to your installation. The caps fit snugly into the ends of the mounting rail.  Available in black or silver/grey.

    £0.58 Exc. VAT

    £0.70 Inc. VAT

  • End Clamp+ 30 - 50mm Silver-Powerland

    Powerland End Clamp+ 30 - 50mm Silver

    Part No: REN-420081 Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081 Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Silver

    £2.01 Exc. VAT

    £2.41 Inc. VAT

  • Clenergy Pro Rail Cap Grey-Powerland

    Powerland Clenergy Pro Rail Cap Grey

    Part No: ER-CAP-PRO-G Mounting - Rail End Caps Supplier Part No: ER-CAP-PROG Weight: 0.006 kg

    £0.40 Exc. VAT

    £0.48 Inc. VAT

  • Elettro Brescia 4mm2 single-core DC cable 25m - Black - Powerland Renewable Energy

    Powerland Elettro Brescia 4mm2 single-core DC cable 25m - Black

    Part No: CABLE4-1-25 Cables - DC Cables 4 mm², single-core, black, 25m NEW H1Z2Z2-K certified 25m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-25 Weight: 1.365 kg Length: 25 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £16.81 Exc. VAT

    £20.17 Inc. VAT

  • Fastensol Black End Clamp

    Powerland Fastensol Black End Clamp

    End clamps secure the solar panels to the mounting rails, and are used at the ends of the row of panels. Please select the size you require from the drop down box. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: black MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

    £1.17 Exc. VAT

    £1.40 Inc. VAT

  • Fastensol Rail Splice

    Powerland Fastensol Rail Splice

    Use these for long rows of rail, simply join lengths of rail using the rail splice kits. Rails can be cut to length with a hacksaw or grinder. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd 50 per box, 200 per carton

    £2.29 Exc. VAT

    £2.75 Inc. VAT

  • CT1 Sealant

    Powerland CT1 Sealant

    This sealant is for use with the Fastensol A-Slate. When fixing the slate mate to the slate roof, holes are drilled. This sealant can be used to fill these holes, and seal under and around the A-slate plate. Colour: BlackTime to full cure: 24 hoursVolume: 290ml

    £13.52 Exc. VAT

    £16.22 Inc. VAT

  • Fastensol A-Slate

    Powerland Fastensol A-Slate

    These aluminium plates allow for the easy installation of solar panels onto slate roofs. The plates sit on top of the slate tiles and are fastened above the battens/rafter.  Features and Specifications: Material: Aluminium Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m² Maximum building height: 20m MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Included in the box: A-slate plate, Rubber Pad, Rail Bolt, 2x screws and 2x spacers

    £11.69 Exc. VAT

    £14.03 Inc. VAT

  • Fastensol Pan Tile Roof Hook (Portrait) - TH01

    Powerland Fastensol Pan Tile Roof Hook (Portrait) - TH01

    These substantial stainless steel brackets are used to secure the mounting rails to the roof beams. These are suitable for pan tile and concrete tiled roofs only. To fit, a few tiles are removed from the outside of the roof and the hook secured to a rafter pointing 'downhill' with the tek screws provided. Plywood padding can be used to ensure the correct spacing from the tile surface. The tiles are simply replaced around the hook ensuring a weatherproof finish. System features and specifications: Suitable for pitched and flat roofs Cladding type: concrete / pan / roman tiles (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: stainless steel Colour: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd 10 per box, 40 per carton

    £5.89 Exc. VAT

    £7.07 Inc. VAT

  • Solar Roof Plain Tile Anchor (Screws are not included)-Powerland

    Powerland Solar Roof Plain Tile Anchor (Screws are not included)

    Part No: ER-I-PRO-02 Mounting - Roof Anchor- Tile & Slates The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers

    £6.88 Exc. VAT

    £8.26 Inc. VAT

  • Renusol Hexag. Flange Nut w. serration M8 - Powerland Renewable Energy

    Powerland Renusol Hexag. Flange Nut w. serration M8

    Part No: REN-900001 Mounting - Fixings Hexagon Flange Nut With Serration Supplier Part No: 900001 Weight: 0.007 kg

    £0.09 Exc. VAT

    £0.11 Inc. VAT

  • Hammerhead bolt M8x25-Powerland

    Powerland Hammerhead bolt M8x25

    Part No: REN-900007 Mounting - Fixings Hammerhead bolt M8x25 Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900007 Weight: 0.018 kg

    £0.21 Exc. VAT

    £0.25 Inc. VAT

  • VarioSole+ Rail connector for rail 50 x 37 mm-Powerland

    Powerland VarioSole+ Rail connector for rail 50 x 37 mm

    Part No: REN-400532 Mounting - Rail Connectors Technical Data: Dimensions: 195 x 27,9 x 38,8mm Weight: 0.193kg Rail Length: 195,0mm Material: Aluminium Certification: TUV ID:48970; MCS012 IK0197/03 Useable with: VS+ Mounting rail 50 x 37mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 400532 Weight: 0.19 kg

    £3.84 Exc. VAT

    £4.61 Inc. VAT

  • Elongation rails for ConSole 4.1, 4.2, 5.2, 6.2, CS+ ( x2 )-Powerland

    Powerland Elongation rails for ConSole 4.1, 4.2, 5.2, 6.2, CS+ ( x2 )

    Part No: REN-460001 Mounting - Flat Roof Trays Description Applicational Data Material Dimensions Weight Compatible Components Rail suitable for attachment modules to ConSole ConSole 4.1, 4.2, 5.2 and 6.2 Aluminium 150 x 25 x 12 mm 0,034 kg 400004, 400005, 520041-K, 520042-K, 520052-K, 520062-K,2 x Elongation rail,4 x Hexag. screw DIN933-M6x20 A2-70 4 x Washer DIN9021-6,4-A2 4 x Self-locking hexag. nut DIN985-M6-A2.REN460001, Renusol, PV Mounting, Flat Roof Tray.Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:460001 Weight:0.11 kg

    £6.76 Exc. VAT

    £8.11 Inc. VAT

  • Roof Hook Eco Basic (no wood screws )-Powerland

    Powerland Roof Hook Eco Basic (no wood screws )

    Part No: REN-420165 Mounting - Roof Anchor- Tile & Slates ROOF HOOK ECO BASIC (WITHOUT WOOD SCREW) Size: 150x180x170 mm Weight: 0,55 kg Set pre-assembled Dimensions base plate: 50 x 150 mm Material: Galvanised steel Material thickness: 5,0 / 4,0 mm Hammerhead Bolt Ø: M8   Applicable with: Wood Roof decking: Tiled roof No of screws: 2/3 x 6,0 Horizontal adjustment: 60,0 mm Height adjustment: 37,50 mm   Duration of protection Zinc coating according to EN ISO 14713-1:2017 Zinc coating Duration of protection in Corrosion category C3 (medium con­tamination or light chloride load): 26-78 years   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420165 Weight:0.54 kg

    £6.13 Exc. VAT

    £7.36 Inc. VAT

  • VarioSole+ Mounting rail 41 x 35 x 4400 mm BLACK-Powerland

    Powerland VarioSole+ Mounting rail 41 x 35 x 4400 mm BLACK

    Part No: REN-400525-B Mounting - Mounting Rails Renusol Mounting Rail, to be used with the VarioSole product range. Supplier Part No: 400525-B Weight: 3 kg Length: 4.4 m

    £45.81 Exc. VAT

    £54.97 Inc. VAT

  • Mid Clamp Rapid16 30-40mm Silver-Powerland

    Powerland Mid Clamp Rapid16 30-40mm Silver

    Part No: SLT-131121-001 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131121-001 Weight: 0.049 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver  

    £1.33 Exc. VAT

    £1.60 Inc. VAT

  • Connector Solo5, Solo05 Light, ProfiPlus, FixZ-7 & FixZ-15-Powerland

    Powerland Connector Solo5, Solo05 Light, ProfiPlus, FixZ-7 & FixZ-15

    Part No: SLT-129002-002 Mounting - Rail Connectors Rail connector for Eco05, Solo, Solo05, FixZ7, FixZ15 profile rails. Solo, SoloPlus connector FixZ-7, FixZ-15, pre-assembled Important Replaced by SLT-129060-000 for SA. Ersetzt durch SLT-129060-000 für SA. Supplier Part No: 129002-002 Weight: 0.17 kg

    £3.60 Exc. VAT

    £4.32 Inc. VAT

  • End Clamp Rapid16 30-40mm Silver-Powerland

    Powerland End Clamp Rapid16 30-40mm Silver

    Part No: SLT-131101-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131101-001 Weight: 0.04 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver

    £1.33 Exc. VAT

    £1.60 Inc. VAT

  • Solar Roof Pro Rail 4600mm-Powerland

    Powerland Solar Roof Pro Rail 4600mm

    Part No: ER-R-PRO-4600 Mounting - Mounting Rails The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: ER-R-PRO4600 Weight: 3.4 kg Length: 4.6 m

    £25.76 Exc. VAT

    £30.91 Inc. VAT

  • Elettro Brescia 4mm2 single-core DC cable 100m - Black - Powerland Renewable Energy

    Powerland Elettro Brescia 4mm2 single-core DC cable 100m - Black

    Part No: CABLE4-1-100 Cables - DC Cables 4 mm², single-core, black, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-100 Weight: 5 kg Length: 100 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £64.77 Exc. VAT

    £77.72 Inc. VAT

  • Fastensol Nut

    Powerland Fastensol Nut

    These nuts sit in the profile of Fastensol rail, and can be spun unto bolts for fixing components to the rail. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

    £0.22 Exc. VAT

    £0.26 Inc. VAT

  • Fastensol Rail Bolt

    Powerland Fastensol Rail Bolt

    Use these for connecting roof hooks to Fastensol rail. These can also be used for attaching optimisers, microinverters or other kit to Fastensol rail. System features and specifications: T?Nut with M8*25mm bolt Material: aluminium nut & stainless steel bolt Color: silver MCS 012 certification Part number: F?TN?GS Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

    £0.53 Exc. VAT

    £0.64 Inc. VAT

  • Fastensol Black Mid Clamp (30mm)

    Powerland Fastensol Black Mid Clamp (30mm)

    Mid clamps secure two neighbouring solar panels to the mounting rails, and are used in between panels. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: black MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

    £1.17 Exc. VAT

    £1.40 Inc. VAT

  • Fastensol Rail Splice (Black)

    Powerland Fastensol Rail Splice (Black)

    Use these for long rows of rail, simply join lengths of rail using the rail splice kits. Rails can be cut to length with a hacksaw or grinder. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Colour: black MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd 50 per box, 200 per carton

    £2.03 Exc. VAT

    £2.44 Inc. VAT

Forgot Password


Back to top