If You Haven't Already Done So Register Here For Trade Account

Photovoltaic

14 products

  • GivEnergy Single Phase Energy Meter with CT

    GivEnergy Single Phase Energy Meter with CT

    Part No: GIV-GM120CT Display - Energy Meter The Modbus I.D Of The Meter Comes Preset As ID1 But Provides Functionality To Be Addressed Under 3 Different Modbus IDs ID1 - Import and Export meter ID2/3 - PV Monitoring meters 45/100 = 45A In-Line connected meter with a 100A CT Protection Class IP51 Dimensions (HxWxD) 119 x 17.5 x 62mm CT cable length - 150cm For any additional information on the new metering solution or if you need to reprogram the address of the meter on site, then please contact - support@givenergy.co.uk Please note: Currently this meter is not programmable we are awaiting an update from GivEnergy We awaiting information and documentation for this product   Supplier Part No:GEM120CT Weight:0.2 kg

    £44.55 Exc. VAT

    £53.46 Inc. VAT

  • Emlite ECA2 1ph kWh gen meter (extended cover)

    Emlite ECA2 1ph kWh gen meter (extended cover)

    Single phase ECA2 meter Z version without pulsed output (this is not the flashing LED but actually a physical connection with a transistor output. This is normally used with Data loggers but is rarely used in PV metering).

    £28.15 Exc. VAT

    £33.78 Inc. VAT

  • GivEnergy EM115 Single Phase Modbus Energy Meter with CT (ID3)

    GivEnergy EM115 Single Phase Modbus Energy Meter with CT (ID3)

    Part No: GIV-EM115CT-ID3 Display - Energy Meter GivEnergy EM115 Single Phase Modbus Energy Meter for direct metering up to 100A (ID3) Product Features This meter has been set as ID3 where 3 meters is being used in a system With bi-directional energy measurement This meter is ideal for Solar PV energy metering Direct/CT connection and solid or split CT options LCD display with clear green backlight 50 Pulse output 1,2,3 and 4 tariff meter option Accuracy class B according to EN50470-3 Accuracy class 1 according to IEC62053-21 EEprom memory backup Import / Export / Generation and Consumption NET Metering to comply with OFGEM regulations on Co-located Storage   Supplier Part No:GIV-EM115CT-ID3 Weight:0.9 kg

    £44.35 Exc. VAT

    £53.22 Inc. VAT

  • GivEnergy EM115 Single Phase Modbus Energy Meter with CT (ID2)

    GivEnergy EM115 Single Phase Modbus Energy Meter with CT (ID2)

    Part No: GIV-EM115CT-ID2 Display - Energy Meter GivEnergy EM115 Single Phase Modbus Energy Meter for direct metering up to 100A (ID2) Product Features This meter has been set as ID2 where 2 meters is being used in a system With bi-directional energy measurement This meter is ideal for Solar PV energy metering Direct/CT connection and solid or split CT options LCD display with clear green backlight 50 Pulse output 1,2,3 and 4 tariff meter option Accuracy class B according to EN50470-3 Accuracy class 1 according to IEC62053-21 EEprom memory backup Import / Export / Generation and Consumption NET Metering to comply with OFGEM regulations on Co-located Storage   Supplier Part No:GIV-EM115CT-ID2 Weight:0.9 kg

    £34.69 Exc. VAT

    £41.63 Inc. VAT

  • Landis L&G 3-ph generation meter ZMD410 200A (1 pulse/kWh) with Current Transformers

    Landis L&G 3-ph generation meter ZMD410 200A (1 pulse/kWh) with Current Transformers

    Part No: ZMD410-STCK35 Meters - Three Phase Generation Meters This part is made up of the following items: 1 x ZMD410 L&G 3-ph generation meter ZMD410 200A (100 pulse/kWh)   3 x CT-200A Current Transformer 200A ( incl. fly lead )   Keywords: ZMD410STCK35, Landis, Three Phase Generation Meters, landis, Landis and Gyr   Weight:2.23 kg

    £384.00 Exc. VAT

    £460.80 Inc. VAT

  • Landis L&G 3-ph generation meter ZMD410 200A (100 pulse/kWh)

    Landis L&G 3-ph generation meter ZMD410 200A (100 pulse/kWh)

    Part No: ZMD410 Meters - Three Phase Generation Meters This is a Class 1 accuracy, kWh Generation Meter manufactured by Landis + Gyr to Utility Company standards. The ZMD410CT/E650 meter requires CTs in order to function. Please consider what current rating is appropriate based on the maximum capacity of the PV installation.  Keywords: Three Phase Generation Meters   Supplier Part No:ZMD410 Weight:1.45 kg

    £316.00 Exc. VAT

    £379.20 Inc. VAT

  • Iskra 3-ph GSM generation meter CT Meter

    Iskra 3-ph GSM generation meter CT Meter

    Part No: AM550-CT Meters - Three Phase Generation Meters this next generation AM550 smart meter, with an innovative platform approach enables seamless integration of next generation smart metering functions into the smart grid.  The specific model of this meter is AM550 It includes these features: Universal standardized transparent passthrough communication interface  Optimized new metrology base with a powerful “Measure Everything” measuring concept  Modular communication on WAN (P3) and HAN (P1) level  FW upgradeability of communication modules (P3 port)  Backward compatible PLC modules  Flexible memory capacity availability  Extended set of embedded Smart Grid functions Integrated high level security mechanisms Flexible set of input/output options  Sub-metering support and data forwarding over various HAN and WAN communication paths UK:This meter includes a roaming SIM that is pre-registered with Meter Online. In order to choose a suitable data subscription and activate the SIM, go to https://secure.ss4meteronline.co.uk/  PLEASE NOTE: This meter does not include CT clamps and these should be sourced separately. 3 x split CT's (SCT24) are required for use with this meter. Supplier Part No:AM550-CT200 Weight:1.5 kg

    £195.25 Exc. VAT

    £234.30 Inc. VAT

  • Emlite 1-ph GSM Smart Meter

    Emlite 1-ph GSM Smart Meter

    Part No: EMGSM1 Meters - Single Phase Generation Meters   MID approved Automatic Metering Reading for Micro-Gen, Feed In Tariff and Sub-metering applications.   Designed specifically for the collection of micro-generation metering data, EMGSM1 provides remote collection of meter readings especially generation metering of wind, solar and any other renewable energy installations. The meter is of modular construction and allows a range of communication modules to be fitted to allow for future developments in remote metering. The meter is a fully MID approved device and can provide functionality over and above that required for generation metering making it suitable for many other applications. Additional functionality includes Time-of-Use Rate Switching, Power Quality Recording, Active (kWh) and Reactive (kvarh) energy measurement across both import and export. The overall solution has been designed to minimise installation time and reduce the need for return maintenance visits. An indication of the GSM signal strength is provided on the meter display and in the cases where a network resilient SIM is fitted, the number of available networks is provided. This single display allows the installer to leave site confident that the installation is fully operational with a robust communication link. Comes supplied with a SIM card.    To read these smart meters remotely you will need MeterOnline unless you have your own AMR system     Supplier Part No:EMA1.Z Weight:0.805 kg

    £135.70 Exc. VAT

    £162.84 Inc. VAT

  • ISKRA MT174 CT - 3-ph CT Operated Generation Meter

    ISKRA MT174 CT - 3-ph CT Operated Generation Meter

    Part No: ISKRA-MT174-CT Meters - Three Phase Generation Meters Iskra MT174 CT CT operated 200\5 3 Phase 4 wire Import\Export MID approved Pulsed Output   Three-Phase Static Electricity Multi Tariff Meter with Maximum Demand Indicator and Load-profile   THIS METER REQUIRES CTs TO OPERATE.      Supplier Part No:MT174CT 200/5 Weight:1 kg

    £79.30 Exc. VAT

    £95.16 Inc. VAT

  • Emlite Bi-Directional 3-ph generation meter EMP.az, 100A (1000 pulse/kWh) - Powerland Renewable Energy

    Emlite Bi-Directional 3-ph generation meter EMP.az, 100A (1000 pulse/kWh)

    Part No: EMP1-AZ Meters - Three Phase Generation Meters Part of the Emlite three phase metering range which offers superb meters for a wide range of applications where basic metering is needed. They are of high quality and  sturdy construction with features normally found in more expensive meters. Product Features Accuracy Class A and B 4 quadrant energy measurement Optional power quality information Configurable pulsed outputs Clear and easy to read LCD display Solid Brass terminals Optional finger guard for main terminals Does not come with CT's. Supplier Part No: EMP1-AV Weight: 1.054 kg

    £84.41 Exc. VAT

    £101.29 Inc. VAT

  • Iskra MT174 3 Phase 4 wire 120A - Powerland Renewable Energy

    Iskra MT174 3 Phase 4 wire 120A

    Part No: ISK-MT174 Meters - Three Phase Generation Meters The MT174 electronic three-phase meters are designed for measurement and registration of active, reactive and apparent energy and demand in three-phase four-wire networks Multi-tariff c\w internal time switch 120A Three Phase/Single Phase kWh meter OFGEM Approved - Import/Export Energy Tariff control input Small size modern design Pulse output Max Demand Low Profile   Supplier Part No: MT174-Direct Weight: 1 kg

    £79.65 Exc. VAT

    £95.58 Inc. VAT

  • SDM120DB-MID Single-Phase DIN Rail Mounted Digital Meter With Back Light - Powerland Renewable Energy

    SDM120DB-MID Single-Phase DIN Rail Mounted Digital Meter With Back Light

    Part No: SDM120DB Meters - Single Phase Generation Meters SDM120D meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D - single direction range, work directly connected to a maximum load 45A AC circuit.  This SDM120DB version comes with a backlight making it easier to take readings  Active Energy Measured 45A Direct Connection Pulse Output 1 Module Wide 35mm Din Rail Mounting Measurements: H - 119mm W - 17.5mm D - 62mm Warning: This is a DIN rail mounted meter and will need to be housed in a DIN rail enclosure   Supplier Part No: SDM120DB Weight: 0.081 kg

    £23.42 Exc. VAT

    £28.10 Inc. VAT

  • Emlite 1-ph generation meter 100A (1000 pulse/kWh) incl. Extended Cover - Powerland Renewable Energy

    Emlite 1-ph generation meter 100A (1000 pulse/kWh) incl. Extended Cover

    Part No: EM-ECA2 Meters - Single Phase Generation Meters Emlite Single Phase Total Generation Meter 100A with Pulse Output The ECA2 single phase meter is one of the worlds most compact metering units The meter provides measurement of active (kWh) energy in both import and export directions with registers shown on the large easy to read LCD display. The display features 8×3.5mm characters and can be configured to auto cycle any of the available registers or remain static with only a single register viewable   Part Code: ECA2.v     Does not come with CT's. Supplier Part No: ECA2VETC Weight: 0.305 kg

    £28.65 Exc. VAT

    £34.38 Inc. VAT

  • Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover-Powerland

    Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover

    Part No: EM-ECA2-BI Meters - Single Phase BiDirectional Generation Meters Emlite Single Phase Bi-Directional (Import/Export) Total Generation Meter 100A with Pulse Output Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values.    NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.  This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)’  document released by OFGEM.   Part Code: ECA2.nz Important This is a bi-directional generation meter for hybrid inverters, please delete standard generation meter from your order if using this.  Supplier Part No: ECA2NET ETC Weight: 1.22 kg

    £32.21 Exc. VAT

    £38.65 Inc. VAT

Forgot Password


Back to top