Solar Panel Fitting & Mounting Kits
Powerland Mid Clamp Rapid16 30-40mm Silver
Part No: SLT-131121-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-001 Weight: 0.049 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver
£1.33 Exc. VAT
£1.60 Inc. VAT
Powerland Connector Solo5, Solo05 Light, ProfiPlus, FixZ-7 & FixZ-15
Part No: SLT-129002-002 Mounting - Rail Connectors Rail connector for Eco05, Solo, Solo05, FixZ7, FixZ15 profile rails. Solo, SoloPlus connector FixZ-7, FixZ-15, pre-assembled Important Replaced by SLT-129060-000 for SA. Ersetzt durch SLT-129060-000 für SA. Supplier Part No: 129002-002 Weight: 0.17 kg
£3.60 Exc. VAT
£4.32 Inc. VAT
Powerland End Clamp Rapid16 30-40mm Silver
Part No: SLT-131101-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131101-001 Weight: 0.04 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver
£1.33 Exc. VAT
£1.60 Inc. VAT
Powerland Flat Roof Support Light 3.2m Beam Kit - Strut 700mm
Part No: SLT-159005-005 Mounting - Flat Roof Schletter Special Supports This is the new style of A frame mounting. Then for different angle you can order the vertical angle strut to get your 15 or 30 degree anglle 15 Deg angle you need following 2 vertical beams struts SLT-159005-001 & SLT-159005-005 Supplier Part No: 159005-005 Weight: 0.612 kg
£8.46 Exc. VAT
£10.15 Inc. VAT
Powerland Angle connector Rapid 2+ L
Part No: SLT-119026-001 Mounting - Flat Roof FLATGRID Rapid2+ L bracket connector. Supplier Part No: 119026-001 Weight: 0.145 kg
£3.91 Exc. VAT
£4.69 Inc. VAT
Powerland Roof hook RapidA 45
Part No: SLT-101020-020 Mounting - Roof Anchor- Tile & Slates The New RAPID A 45 ROOF HOOK EcoA aluminium roof hook will cover a wide range of applications on tiled roofs in future. It makes quick and flexible installation possible by hooking in and is fastened with just one Torx pan head screw. The assembly is simplified by an additional feature: First, only the screw-on plate is mounted on the rafters and the bracket is only snapped in afterwards. At the same time, it can be combined with all common Schletter profiles Product Features Material: Aluminium Fastening with a pan head screw Variable bridge arrangement Hook on: Our new RapidA roof hook is faster to install than ever. 10 Year Warranty Supplier Part No: 101020-020 Weight: 0.27 kg PV Light: R2+
£6.02 Exc. VAT
£7.22 Inc. VAT
Powerland Universal-Adapter M8
Part No: SLT-119033-002 Mounting - Roof Anchor- Hanger Bolts Universal adapter Uno M8 for hanger bolt Reasons for use: Single and double fixing on steel purlins As clamp dowel for special applications in connection with the Eco05 module support profile. Support profile must be fastened with M8 screws to the clamp dowel. LxWxH: 104 x 50 x 50 mm Supplier Part No SLT-119033-002 Weight: 0.8 kg PV Light: R2+
£1.98 Exc. VAT
£2.38 Inc. VAT
Powerland Standing seam clamp Saddle Clamp 504
Part No: SLT-112001-010 Mounting - Roof Anchor- Seam Clamps Seam clamp 504 AL KK for standing seam roof Especially suitable for double lock standing seam roofs made of titanium zinc sheet metal. Supplier Part No: 112001-010 Weight: 0.17 kg PV Light: R2+
£6.83 Exc. VAT
£8.20 Inc. VAT
Powerland Seam clamp 522 Rapid Zambelli RibRoof500 and similar designs
Part No: SLT-112004-002 Mounting - Roof Anchor- Seam Clamps SHEET METAL SEAM CLAMPS Please note: The tightening torque must be limited so that the sheet metal seam does not become distorted and the thermal lengthening of the sheets is not prevented! Folding clamp 522 AL Rapid Zambelli RibRoof500 and similar Non-penetrative clamps Supplier Part No: 112004-002 Weight: 0.14 kg PV Light: R2+
£3.59 Exc. VAT
£4.31 Inc. VAT
Powerland Seam clamp 503 Rapid for standing seam roof
Part No: SLT-112001-005 Mounting - Roof Anchor- Seam Clamps Seam clamp 503 Rapid for standing seam roof Please note: In case of roofs made of titanium zinc sheet metal, please verify that the standing seams have sufficient load-bearing capacity! Keywords: SLT112001000, Schletter, PV Mounting, Roof Anchor- Seam Clamp Supplier Part No: 112001-005 Weight: 0.115 kg PV Light: R2+
£3.59 Exc. VAT
£4.31 Inc. VAT
Powerland Module bearing profile Solo - 3.3m
Part No: SLT-120005-330 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Solo Light Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 40mm Width: 40mm Length: 3300mm Wall thickness: 1.2mm Supplier Part No: 120005-03300 Weight: 3 kg Length: 3.3 m PV Light: SLT1,R2+
£26.73 Exc. VAT
£32.08 Inc. VAT
Powerland Module bearing profile Eco05 - 4.4 m
Part No: SLT-120001-440 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Eco05 Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 30mm Width: 30mm Length: 4400mm words: SLT120001440, Schletter, PV Mounting Supplier Part No: 120001-04400 Weight: 3.61 kg Length: 4.4 m PV Light: SLT1,R2+
£26.05 Exc. VAT
£31.26 Inc. VAT
Powerland Insertion connector Solo / Profile Kit (Profile including screws)
Part No: SLT-129060-000-KIT Mounting - Rail Connectors This part is made up of the following items: 2 x SLT-129060-000 Insertion connector Solo / Profile 4 x SLT-943755-925 Self Drilling Screw 5.5 x 25 A2 - For Connectors Schletter Solo And Solo Light Internal Rail Connector Kit Schletter Solo and Solo Light internal rail connector kit. Used to join two rails together to create longer spans. This product contains 2x aluminium parts and 4 screws. Recommended on trapezoidal roofs where rail alignment is a priority. Especially useful when using single fix trapezoidal fixings where standard external connectors could prevent the rails from sitting properly on the roof crests. Weight: 0.164 kg
£9.37 Exc. VAT
£11.24 Inc. VAT
Powerland Schletter ClampFit Fastener
Part No: SLT-130004-200 Mounting - Roof Anchor- Trapezoidals This is a new version of the popular trapezoidal fastener ClampFit-H for landscape modules. The new fastener uses standard module clamps, which makes the different sizes redundant and provides a classical “one fits all” solution for this extremely cost effective fastener. Works with standard Schletter Rapid2 + and Rapid16 module clamps. The system is suitable for all trapezoidal sheets whose sides are at least 22 mm high and from 8 ° to max. 45 ° are inclined System components: aluminium Screws: stainless steel Seal: EPDM Screws must be ordered separately as needed (2 pieces for each ClampFit) Please note typically this system will use 4 fixing points per module. At high wind or snow loads or with large modules it can might be required to use more fixing points. Keywords: Schletter, PV Mounting, Roof Anchor- Trapezoidal Screws are not included. Please use with 2 x SLT-943000-360 screws per Schletter ClampFit Fastner piece. The Schletter ClampFit Fasteners are for our rail-less solutions on IBR/Trapezoidal roofs for panels that are Landscape orientated. Supplier Part No: 130004-200 Weight: 0.12 kg PV Light: R2+
£3.48 Exc. VAT
£4.18 Inc. VAT
Powerland VA Flat Head TORX 8x80 Wood Screw
Part No: SLT-943208-080 Mounting - Wood Screws WOOD SCREW 8 x 80 mm Wood screw with plate head, VA - Stainless steel Supplier Part No: 943208-080 Weight: 0.02 kg
£0.54 Exc. VAT
£0.65 Inc. VAT
Powerland FixZ-15 bottom/front18 rail 4.4m
Part No: SLT-121009-440 Mounting - FixZ FixZ-15 Further development of Schletter’s proven FixZ-7 system with an even steeper inclination angle. Provides additional elevation for flat or low pitch trapezoidal sheet metal roofs Quick and easy assembly Better rear airing Better self-cleaning Higher yields Optimum load transmission into the roof cladding Setting angles from 11 – 15 degrees depending on module length. Designed for module heights from about 1.3 m up to 1.7 m FixZ-15 Lower system profile18 4300 mm Supplier Part No: 121009-04400 Weight: 1.1 kg Length: 4.4 m PV Light: R2+
£56.27 Exc. VAT
£67.52 Inc. VAT
Powerland FixZ-7 bottom/front18 rail 4.4m
Part No: SLT-121010-440 Mounting - FixZ FixZ-7 The optimum additional elevation for flat or low pitch trapezoidal sheet metal roofs. Quick and easy mounting Better rear airing Better self-cleaning Optimum load transmission into the roof cladding FixZ-7 Lower system profile18 4300 mm Supplier Part No: 121010-440 Weight: 4.4 kg Length: 4.4 m
£48.54 Exc. VAT
£58.25 Inc. VAT
Powerland Universal Calotte with EPDM
Part No: SLT-119005-001 Mounting - Fixings For sealing on roofs made of trapezoidal sheet metal. Supplier Part No: 119005-001 Weight: 0.026 kg
£1.59 Exc. VAT
£1.91 Inc. VAT
Powerland Screw 6,3x64 min.1.5mm self-tapping A2
Part No: SLT-943763-064 Mounting - Fixings THREADED SCREW, SELF-GROOVING, A2 6.3 x 64 Supplier Part No: SLT-943763-064 Weight: 0.02 kg
£0.24 Exc. VAT
£0.29 Inc. VAT
Powerland Screw M8x20 Hexagon socket screw - ISO4762 - A2-70 DL
Part No: SLT-943000-025 Mounting - Fixings M8X20 - BOLT - SH LS ISO4762 - A2-70 DL Hexagon socket screw with locking teeth Supplier Part No: SLT-943000-025 Weight: 0.013 kg
£0.20 Exc. VAT
£0.24 Inc. VAT
Powerland FixZ-7 Windsafe18 to 2067mm for 72 cell modules
Part No: SLT-169018-210 Mounting - FixGrid Fix Grid 18 FixZ-7 Windsafe18 to 2067mm for 72 cell modules Supplier Part No: 169018-210 Weight: 1.5 kg Length: 2.07 m
£19.33 Exc. VAT
£23.20 Inc. VAT
Powerland MetaSole+ Sheet thickness: FE 0.50-1.50 mm, AL 0.5-2.00mm 2 x 6mm screws included
Part No: REN-420402 Mounting - Roof Anchor- Trapezoidals Renusol Metasole mounting system for trapezoidal/IBR and corrugated sheet metal roofs. This roof anchor is suitable for landscape panel mounting solutions. The roof anchor is suitable for PV systems with framed pv-modules from 30 to 50 mm frame height. Installation is made directly into the metal roofing using self-tapping and thread-forming screws that come as standard with the mounting bracket. Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420402 Weight: 0.08 kg
£4.24 Exc. VAT
£5.09 Inc. VAT
Powerland Mid Clamp Rapid16 30-40mm Black
Part No: SLT-131121-901 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-901 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Black
£2.13 Exc. VAT
£2.56 Inc. VAT
Powerland SingleFix Pro for corrugation heights from 22 mm (1 piece)
Part No: SLT-113009-003 Mounting - Roof Anchor- Trapezoidals SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm. SingleFix Pro for corrugation heights from 22 mm (1 piece). Screws must be ordered separately as needed (2 pieces for each SingleFix Pro) Used in connection with Solo mounting rails The easy solution for mounting in Portrait on IBR roofs. This part No represents one of Singlefix plate SLT-113009-003 x 1 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail. Note : Screws needs to be purchased seperately SLT-943000-360 Supplier Part No: 113009-003 Weight: 0.035 kg PV Light: R2+
£1.50 Exc. VAT
£1.80 Inc. VAT
Powerland RapFix attachment for Eco Roof hooks
Part No: SLT-109008-003 Mounting - Roof Anchor- Tile & Slates Designed particularly for Roof hooks which are not available as a rapid version. Replacement for KlickTop connectors. RapFix attachment allows easy connection of rail to the roof hook. Supplier Part No: 109008-003 Weight: 0.1 kg
£3.61 Exc. VAT
£4.33 Inc. VAT
Powerland KlickTopPro attachment for hanger bolt
Part No: SLT-119001-020 Mounting - Roof Anchor- Hanger Bolts Hanger bolt KlickTop extension part for hanger bolt For M10 / M12 hanger bolts, loose, aluminium Supplier Part No: 119001-020 Weight: 0.11 kg PV Light: R2+
£3.20 Exc. VAT
£3.84 Inc. VAT
Powerland M10x25 Square head screw
Part No: SLT-943410-025 Mounting - Fixings square headed screw to fix in flange nut Supplier Part No: 943410-025 Weight: 0.02 kg
£0.43 Exc. VAT
£0.52 Inc. VAT
Powerland End Clamp Rapid16 30-40mm Black
Part No: SLT-131101-901 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131101-901 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Black
£2.13 Exc. VAT
£2.56 Inc. VAT
Powerland Galvanised Flat Head TORX 8x80 Wood Screw
Part No: SLT-942208-080 Mounting - Wood Screws Galvanised Flat Head TORX 8x80 Wood Screw. Supplier Part No: 942208-080 Weight: 0.022 kg
£0.31 Exc. VAT
£0.37 Inc. VAT
Powerland Screw 6.0 x25 self-tapping A2 with sealing washer
Part No: SLT-943000-360 Mounting - Fixings Thin sheet metal screw 6.0 x 25 mm self-tapping with A2 sealing washer. For use with: ClampFit Fastener SLT-130004-200 -2 screws required per piece SingleFix-V Solo SLT-113009-003 - 2 screws required per piece Supplier Part No: 943000-360 Weight: 0.005 kg
£0.34 Exc. VAT
£0.41 Inc. VAT
Powerland Screw 8x100 VA flat head TORX wood
Part No: SLT-943208-100 Mounting - Wood Screws WOOD SCREW 8 x 100 mm Wood screw with plate head, VA - Stainless steel Supplier Part No: 943208-100 Weight: 0.026 kg
£0.63 Exc. VAT
£0.76 Inc. VAT
Powerland Roof hook Universal
Part No: SLT-100001-000 Mounting - Roof Anchor- Tile & Slates Schletter Standard Roof hooks Universal Roof hook In stainless steel quality Variable bar arrangement Adjustable at the front and rear Middle bar can be set in three different positions Wood screws or rail attaching parts (square head bolts M10 × 25 mm and flange nuts or RapFix attachment) must be ordered separately! Supplier Part No: 100001-000 Weight: 0.97 kg PV Light: R2+
£14.24 Exc. VAT
£17.09 Inc. VAT
Powerland Roof hook Universal with RapFix
Part No: SLT-100001-00R Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x Roof hook Universal 1 x RapFix attachment for Eco Roof hooks Schletter Standard Roof hook with RapFix Universal Roof hook with RapFix attachment to allow easy connection of rail. In stainless steel quality Variable bar arrangement Adjustable at the front and rear Middle bar can be set in three different positions Wood screws must be ordered separately! Weight: 1.07 kg PV Light: R2+
£17.85 Exc. VAT
£21.42 Inc. VAT
Powerland Serrated M10 flange nut
Part No: SLT-943912-010 Mounting - Fixings Flange nut with locking teeth; anti-twist device integrated into the flange,VA DIN6923 Supplier Part No: 943912-010 Weight: 0.01 kg
£0.23 Exc. VAT
£0.28 Inc. VAT
Powerland Plastic End Cap Solo Profi05 Grey
Part No: SLT-129011-000 Mounting - Rail End Caps Plastic grey end cap for the Solo and Profi rails Supplier Part No: 129011-000 Weight: 0.01 kg PV Light: SLT1,R2+
£0.37 Exc. VAT
£0.44 Inc. VAT
Powerland Square M8 nut
Part No: SLT-943914-008 Mounting - Fixings Square nut M8. Compatible with all Schletter system rails in combination with Klick groove and KlickIn click component. Supplier Part No: 943914-008 Weight: 0.005 kg
£0.14 Exc. VAT
£0.17 Inc. VAT
Powerland Hanger bolt kit 10x200 assembled - wood purlins
Part No: SLT-110010-200 Mounting - Roof Anchor- Hanger Bolts Hanger bolts Roof cladding: Corrugated roofs & trapezoidal sheet Hanger bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet metal roofs, so-called fastening kits for corrugated roofs are used, comprising a special hanger bolt with EPDM gasket (will need additional mounting plate). Please note that thread lengths can deviate from the corresponding figures. Hanger bolt kit with vulcanized EPDM gasket (UV-resistant) and 3 high-grade steel flange nuts (V4A), assembled Hanger bolt kit 10 × 200 assembled M10 × 200 mm This hanger bolt is suitable for wood purlins / sub structure. Supplier Part No: 110010-200 Weight: 0.12 kg PV Light: SLT1
£2.35 Exc. VAT
£2.82 Inc. VAT
Powerland Hanger bolt 10x200 with KlickTop attachment SET
Part No: SLT-110010-200-KT Mounting - Roof Anchor- Hanger Bolts This part is made up of the following items: 1 x KlickTopPro attachment for hanger bolt 1 x Hanger bolt kit 10x200 assembled Weight: 0.23 kg PV Light: SLT1
£5.56 Exc. VAT
£6.67 Inc. VAT
Powerland Plastic End Cap Solo Profi05 Black
Part No: SLT-129011-900 Mounting - Rail End Caps Plastic grey end cap for the Solo and Profi rails. Supplier Part No: 129011-900 Weight: 0.007 kg
£0.48 Exc. VAT
£0.58 Inc. VAT
Powerland Roof hook plain tile for Rapid Pro Alu
Part No: SLT-109019-020 Mounting - Roof Anchor- Tile & Slates Sheet metal replacement tiles and roof hook sets for plain tile Rapid including installation set. Please order sheet metal replacement tiles and roof hook sets separately. Compatible with the classic Schletter Solar mounting system and the Schletter ProLine series. Weight: 0.32 kg PV Light: R2+
£9.27 Exc. VAT
£11.12 Inc. VAT
Powerland Module bearing profile Solo Light - 4.4m
Part No: SLT-120005-440 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Solo Light Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 40mm Width: 40mm Length: 4400mm Wall thickness: 1.2mm Supplier Part No: 120005-04400 Weight: 3.54 kg Length: 4.4 m PV Light: SLT1,R2+
£35.66 Exc. VAT
£42.79 Inc. VAT
Powerland Screw M10x25 hexagonal DIN933
Part No: SLT-943610-025 Mounting - Fixings Supplier Part No: 943610-025 Weight: 0.024 kg
£0.24 Exc. VAT
£0.29 Inc. VAT
Powerland Roof hook Rapid2+Pro 45
Part No: SLT-101001-020 Mounting - Roof Anchor- Tile & Slates Schletter Rapid 2+ Roof hooks Roof Hook Rapid2+ 45 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Please note the Rapid 2+ rail attachment might be attached to the roof hook using two different types of screws – torx or hexagonal. Please bear that in mind when choosing correct tools on site. Both screws are equal in terms of quality and strength and exact type does not impact the installation of the roof hook or has an impact on any other aspect of the quality of the product. Wood screws must be ordered separately! Supplier Part No: 101001-020 Weight: 0.95 kg PV Light: R2+
£13.23 Exc. VAT
£15.88 Inc. VAT
Powerland SingleFix Pro for corrugation heights from 22 mm (2 pieces)
Part No: SLT-113009-003-KIT Mounting - Roof Anchor- Trapezoidals This part is made up of the following items: 2 x SingleFix Pro for corrugation heights from 22 mm (1 piece) 4 x Screw 6.0 x25 self-tapping A2 with sealing washer SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm. SingleFix Pro for corrugation heights from 22 mm (2 pieces). Screws must be ordered separately as needed (2 pieces for each SingleFix Pro) Used in connection with Solo mounting rails This part No represents one of Singlefix plate SLT-113009-003 x 2 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail. Note : Screws needs to be purchased seperately SLT-943000-360 Weight: 0.09 kg PV Light: R2+
£4.37 Exc. VAT
£5.24 Inc. VAT
Powerland FixGrid FixZ-15 lower system rail 96mm with connector
Part No: SLT-163900-002 Mounting - FixGrid FixGrid FixZ-15 lower system rail 96mm with connector fixgrid Supplier Part No: 163900-002 Weight: 0.129 kg
£3.78 Exc. VAT
£4.54 Inc. VAT
Powerland End Clamp Rapid16 40-50mm Silver
Part No: SLT-131101-002 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131101-002 Weight: 0.055 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Silver
£1.33 Exc. VAT
£1.60 Inc. VAT
Powerland Sheet metal replacement tile 170 x 380 for UK Plain Tile
Part No: SLT-109016-009 Mounting - Roof Anchor- Tile & Slates Plain tile kit Sheet metal replacement tile 170 x 380 for UK Plain Tile BEZ Rapid beaver tail AL 170 x 380 To used with SLT-109019-000 Roof hooks for Rapid beaver tail AL inst Please note the Schletter Beaver Tail plain tile products are not currently MCS Certified pending the weather tightness testing. Unfortunately, due to an oversite on part of MCS the three models were added in error to the MCS Database, however, this error was rectified, and the products were removed on the 15th December. As per MCS “The outstanding testing is in progress and the product will surely be added once we completed the tests successfully” Supplier Part No: 109016-009 Weight: 0.337 kg
£8.58 Exc. VAT
£10.30 Inc. VAT
Powerland Plain tile Rapid Pro Roof Hook with Metal Tile replacement 170 x 380 KIT
Part No: SLT-109019-020-PLAIN Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x Roof hook plain tile for Rapid Pro Alu 1 x Sheet metal replacement tile 170 x 380 for UK Plain Tile SLT-109016-009: Plain tile kit Sheet metal replacement tile 170 x 380 for UK Plain Tile SLT-109019-020: Sheet metal replacement tiles and roof hook sets for plain tile Rapid including installation set. Weight: 0.657 kg PV Light: R2+
£17.82 Exc. VAT
£21.38 Inc. VAT
