Welcome to Powerland Renewables!
Register for a Trade Account

Solar Panel Fitting & Mounting Kits

6 products

  • Genius Roof - Speed Flash

    Powerland Genius Roof - Speed Flash

    Part No: GEN-SPEEDFLASH Mounting - Roof Flashings The SpeedFlash® streamlines solar installations on slate roofs with a quick, no-‘drill through slate’ method that preserves roof integrity. Ideal for 18″+ slates, it minimizes the need for slate removal. Not for 4″ headlap composite slates. For use on all slate roofs with 3-inch head-lap 1 x SpeedFlash® Base and Cap 2 x Shims (packings) 1 x Foam Insert 1 x Spring support Unlike the SolarFlash®, you do not need to remove any slates. This significantly reduces installation time and the requirement for roofing experience. The SpeedFlash concept retains all the benefits of the SolarFlash®; i.e. no requirement for drilling, avoidance of load bearing and preventing water ingress, thereby maintaining the integrity of the roof. SpeedFlash Demonstration Video   Supplier Part No: SPF005 Weight: 0.4 kg

    £5.95 Exc. VAT

    £7.14 Inc. VAT

  • Genius Roof - Slate Refit Kit-Powerland

    Powerland Genius Roof - Slate Refit Kit

    Part No: GEN-SLATE Mounting - Roof Flashings The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic, or other, panels. By installing with SolarFlash™, it can help you to ensure that all your installations are MCS 012 compliant. SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims 3 x Hallhooks 1 x Hookpull 3 x Compensation hooks   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know.    Supplier Part No: SKI001 Weight: 0.34 kg

    £7.19 Exc. VAT

    £8.63 Inc. VAT

  • Genius Roof - Speed Flash Shield

    Powerland Genius Roof - Speed Flash Shield

    Part No: GEN-SPEEDFLASHSHIELD Mounting - Roof Flashings SpeedFlash® Shield is a tool that installers will need during installation to protect the lower course of slates. A SpeedFlash® Shield should last at least 40 SpeedFlash® installs, this will be determined by the user. The shields purpose is to protect the lower course of slates. Take care to avoid contact with angle grinder to prolong shield life. Supplier Part No: SPF008 Weight: 0.4 kg

    £1.57 Exc. VAT

    £1.88 Inc. VAT

  • Genius Roof - Hallhooks for Fitting Slates (10 Pack)-Powerland

    Powerland Genius Roof - Hallhooks for Fitting Slates (10 Pack)

    Part No: GEN-SLATE-HOOKS Mounting - Roof Flashings The Hallhook™ from Genius Roof Solutions is a permanent, secret and fail safe device that should be used when replacing a broken slate. The Hallhook was invented by a slater and tiler with 45 years of trade under his belt who couldn't stand to see a slate tiled roof covered with unsightly lead or copper straps. He tried all other available slate repairs such as straps, blobs of silicone, plastic proucts that are not only unsightly but time-consuming to install, etc. and then went on to develop the Hallhook.  When to use the Hallhook™  For general repair After solar panel bracket mounting After roof light/window installation After installing slate vents This is a pack of 10 pcs.   Supplier Part No:HHK001 Items in this pack:10 Weight:0.14 kg  

    £7.62 Exc. VAT

    £9.14 Inc. VAT

  • Genius Roof - Flat Tiled Kit-Powerland

    Powerland Genius Roof - Flat Tiled Kit

    Part No: GEN-FT-TILE Mounting - Roof Flashings The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic, or other, panels. By installing with SolarFlash™, it can help you to ensure that all your installations are MCS 012 compliant. SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Small SolarFlash (H 235mm by W 251mm) 1 x Weather stop foam 2 x Shims   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible. Non compatible components are: SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know.    Supplier Part No: SFS003 Weight: 0.16 kg

    £3.10 Exc. VAT

    £3.72 Inc. VAT

  • Genius Roof - Slate Kit for New Build-Powerland

    Powerland Genius Roof - Slate Kit for New Build

    Part No: GEN-SLATE-NEW Mounting - Roof Flashings The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic, or other, panels. By installing with SolarFlash™, it can help you to ensure that all your installations are MCS 012 compliant. SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005.    Supplier Part No: SFS001 Weight: 0.24 kg

    £3.30 Exc. VAT

    £3.96 Inc. VAT

Forgot Password


Back to top