If You Haven't Already Done So Register Here For Trade Account

Solar Panel Fitting & Mounting Kits

6 products

  • ConSole+ (incl. Mounting material and U-Profile)-Powerland

    ConSole+ (incl. Mounting material and U-Profile)

    Part No: REN-520075-K Mounting - Flat Roof Trays The ConSole+ provides an angle of 15 degrees. The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+. The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual. Details: Colour: black Suitable for flat-roof- and ground mounting installations For framed PV-modules Technical Data: Material: HDPE, Aluminium and stainless steel Weight: 7,900 kg Max# module length: 1550-2400 mm Holes gap - width: 895-1014 mm Holes gap - length: 690-1180 mm Other Contents: 1 x 500075 ConSole+ 2 x 400005 ConSole U-Profile 1035 mm 4 x 900027 Hexag# screw DIN933-M6x20 A2-70 4 x 900028 Washer DIN9021-6,4-A2 4 x 900029 Self-locking hexag# nut DIN985-M6-A2 4 x 900106 ConSole Clip 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8  Keywords: REN520075K, PV Mounting, Flat Roof Tray Supplier Part No: 520075-K Weight: 8 kg Length: 1.71 m Renusol GmbH based in Cologne (Germany) and is among the fastest  growing businesses on the European market for PV mounting systems. The manufacturer of high-quality mounting solutions is successful with its 4 core mounting options, VarioSole, MetaSole, InterSole and ConSole in many European countries.  

    £72.50 Exc. VAT

    £87.00 Inc. VAT

  • Mounting material for ConSole 4.1, 4.2, 5.2, 6.2, CS+ - Powerland Renewable Energy

    Mounting material for ConSole 4.1, 4.2, 5.2, 6.2, CS+

    Part No: REN-420022 Mounting - Flat Roof Trays Details: ConSole 4.1, 4.2, 5.2, 6.2 and CS+ Compatible with: 520041-K, 520042-K, 520052-K, 520062-K, 520075-K Technical Data: Material: Aluminium and stainless steel Other Contents: 1 x 900115 Hexag. screw DIN7504-ST5,5x25-A2-SW8 4 x 900027 Hexag. screw DIN933-M6x20 A2-70 4 x 900028 Washer DIN9021-6,4-A2 4 x 900029 Self-locking hexag. nut DIN985-M6-A2 4 x 900106 ConSole Clip   Supplier Part No: 420022 Weight: 0.11 kg Length: 1 m

    £3.88 Exc. VAT

    £4.66 Inc. VAT

  • Rear grip clamp for CS-Powerland

    Rear grip clamp for CS

    Part No: REN-420023 Mounting - Flat Roof Trays The Rear grip clamp for CS (REN-420023) + enables the mounting of solar modules which do not have mounting holes in their frames on the ConSole. PV-Modules without mounting holes or modules which have the module holes on unfavourable positions (e.g. 72 cell modules) can be mounted with this item. This was not possible before with the CS+ solution. Due to that the classical (iconic) system Renusol CS+ can be used in even more cases. Please note this product includes 4 x clips   Supplier Part No: 420023 Weight: 0.15 kg      

    £2.12 Exc. VAT

    £2.54 Inc. VAT

  • ConSole Streamliner+-Powerland

    ConSole Streamliner+

    Part No: REN-520076 Mounting - Flat Roof Trays Description Material Dimensions Weight Compatible Components To be used on the back row of an installation of ConSole + to reduce the windload and thus ballast required HDPE 1533 x 448 x 361 8,406 kg 520075-K 1 x Streamliner+ 9 x Hexag. screw DIN7504-ST5,5x25-A2-SW8 Keywords: REN520076, Renusol, PV Mounting, Flat Roof Tray   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:520076 Weight:7.9 kg Length:1.49 m

    £33.19 Exc. VAT

    £39.83 Inc. VAT

  • Elongation rails for ConSole 4.1, 4.2, 5.2, 6.2, CS+ ( x2 )-Powerland

    Elongation rails for ConSole 4.1, 4.2, 5.2, 6.2, CS+ ( x2 )

    Part No: REN-460001 Mounting - Flat Roof Trays Description Applicational Data Material Dimensions Weight Compatible Components Rail suitable for attachment modules to ConSole ConSole 4.1, 4.2, 5.2 and 6.2 Aluminium 150 x 25 x 12 mm 0,034 kg 400004, 400005, 520041-K, 520042-K, 520052-K, 520062-K,2 x Elongation rail,4 x Hexag. screw DIN933-M6x20 A2-70 4 x Washer DIN9021-6,4-A2 4 x Self-locking hexag. nut DIN985-M6-A2.REN460001, Renusol, PV Mounting, Flat Roof Tray.Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:460001 Weight:0.11 kg

    £6.76 Exc. VAT

    £8.11 Inc. VAT

  • Aluminium U-Profile 1035 mm ConSole 4.2, 5.2,6.2, CS+, single-Powerland

    Aluminium U-Profile 1035 mm ConSole 4.2, 5.2,6.2, CS+, single

    Part No: REN-400005 Mounting - Flat Roof Trays Details: Colour: silber / grey ConSole 4.2, 5.2, 6.2 and CS+ Compatible with: 520042-K, 520052-K, 520062-K, 520075-K Technical Data: Material: Aluminium EN-AW-6063 T6 Weight: 0,203 kg Material thicknesss 2 mm   Two required per console Keywords: REN400005, Renusol, PV Mounting, Flat Roof   Supplier Part No:400005 Weight:0.21 kg

    £5.42 Exc. VAT

    £6.50 Inc. VAT

Forgot Password


Back to top