Welcome to Powerland Renewables!
Register for a Trade Account

Solar Panel Fitting & Mounting Kits

11 products

  • MetaSole+ PORTRAIT 3.6m without EPDM - Powerland Renewable Energy

    Powerland MetaSole+ PORTRAIT 3.6m without EPDM

    Part No: REN-400405 Mounting - Roof Anchor- Trapezoidals This new addition from the MetaSole + range, allows for installation on a pitched roof in a potrait style with the the extra attachment.   Supplier Part No: 400405 Weight: 2.5 kg Length: 3.6 m THIS ITEM DOES NOT COME SUPPLIED WITH EPDM SEAL, THIS WILL HAVE TO BE ORDERED SEPARATELY.

    £27.07 Exc. VAT

    £32.48 Inc. VAT

  • MetaSole + EPDM Roll 5m ( for MS+P 3.6 - 4.2m) - Powerland Renewable Energy

    Powerland MetaSole + EPDM Roll 5m ( for MS+P 3.6 - 4.2m)

    Part No: REN-300224 Mounting - Roof Anchor- Trapezoidals EPDM rubber seal on a roll to be used with Metasole + Portrait  3.6m REN-400405 or 4.2m  REN-400406   Supplier Part No: 300224 Weight: 0.03 kg

    £13.05 Exc. VAT

    £15.66 Inc. VAT

  • MetaSole+ PORTRAIT rail 400mm long - Powerland Renewable Energy

    Powerland MetaSole+ PORTRAIT rail 400mm long

    Part No: REN-420421 Mounting - Roof Anchor- Trapezoidals SHORT 400mm RAIL Material saving solar installation on trapezoidal sheet. Without continuous rails. Suitable for maximum 370mm distance between centres of raised trapezoidal ridges.  VERTICAL PV MODULE ORIENTATION PV modules with a frame height of 30 to 50 mm are attached to the MS + P mounting system in portrait (standing) on the trapezoidal sheet. INSTALLATION WITHOUT PILOT DRILLING Self-tapping screws fix the MS+P PV mounting system directly to the trapezoidal sheet. FOR TRAPEZOIDAL STEEL AND ALUMINUM METAL SHEET Readymade kits are suitable for the installation of PV systems on trapezoidal sheet steel and / or aluminium in various thicknesses. Metasole Portrait kit: consist of Metasole plates and REN-400281 (SW8 6.0x25 E16) screws.     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420421 Weight: 0.34 kg Length: 0.4 m

    £6.77 Exc. VAT

    £8.12 Inc. VAT

  • MetaSole+ metal sheet thickness with 2 x 6.3x 38 screws - Powerland Renewable Energy

    Powerland MetaSole+ metal sheet thickness with 2 x 6.3x 38 screws

    Part No: REN-420405 Mounting - Roof Anchor- Trapezoidals For use on pitched roofs in landscape with the MetaSole and MS+ range.    Weight: 0.09 kg

    £4.20 Exc. VAT

    £5.04 Inc. VAT

  • Schletter ClampFit Fastener - Powerland Renewable Energy

    Powerland Schletter ClampFit Fastener

    Part No: SLT-130004-200 Mounting - Roof Anchor- Trapezoidals This is a new version of the popular trapezoidal fastener ClampFit-H for landscape modules. The new fastener uses standard module clamps, which makes the different sizes redundant and provides a classical “one fits all” solution for this extremely cost effective fastener. Works with standard Schletter Rapid2 + and Rapid16 module clamps. The system is suitable for all trapezoidal sheets whose sides are at least 22 mm high and from 8 ° to max. 45 ° are inclined System components: aluminium Screws: stainless steel Seal: EPDM Screws must be ordered separately as needed (2 pieces for each ClampFit) Please note typically this system will use 4 fixing points per module. At high wind or snow loads or with large modules it can might be required to use more fixing points. Keywords: Schletter, PV Mounting, Roof Anchor- Trapezoidal Screws are not included. Please use with 2 x SLT-943000-360 screws per Schletter ClampFit Fastner piece.   The Schletter ClampFit Fasteners are for our rail-less solutions on IBR/Trapezoidal roofs for panels that are Landscape orientated. Supplier Part No: 130004-200 Weight: 0.12 kg PV Light: R2+

    £3.48 Exc. VAT

    £4.18 Inc. VAT

  • MetaSole+ Sheet thickness: FE 0.50-1.50 mm, AL 0.5-2.00mm 2 x 6mm screws included-Powerland

    Powerland MetaSole+ Sheet thickness: FE 0.50-1.50 mm, AL 0.5-2.00mm 2 x 6mm screws included

    Part No: REN-420402 Mounting - Roof Anchor- Trapezoidals Renusol Metasole mounting system for trapezoidal/IBR and corrugated sheet metal roofs. This roof anchor is suitable for landscape panel mounting solutions. The roof anchor is suitable for PV systems with framed pv-modules from 30 to 50 mm frame height. Installation is made directly into the metal roofing using self-tapping and thread-forming screws that come as standard with the mounting bracket. Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420402 Weight: 0.08 kg

    £4.24 Exc. VAT

    £5.09 Inc. VAT

  • MetaSole+ PORTRAIT rail 350mm long-Powerland

    Powerland MetaSole+ PORTRAIT rail 350mm long

    Part No: REN-420420 Mounting - Roof Anchor- Trapezoidals SHORT 350mm RAIL Material saving solar installation on trapezoidal sheet. Without continuous rails. Suitable for maximum 320mm distance between centres of raised trapezoidal ridges.  VERTICAL PV MODULE ORIENTATION PV modules with a frame height of 30 to 50 mm are attached to the MS + P mounting system in portrait (standing) on the trapezoidal sheet. INSTALLATION WITHOUT PILOT DRILLING Self-tapping screws fix the MS+P PV mounting system directly to the trapezoidal sheet. FOR TRAPEZOIDAL STEEL AND ALUMINUM METAL SHEET Readymade kits are suitable for the installation of PV systems on trapezoidal sheet steel and / or aluminum in various thicknesses. Metasole Portrait kit: consist of Metasole plates and REN-400281 (SW8 6.0x25 E16) screws.     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420420 Weight: 0.29 kg

    £5.93 Exc. VAT

    £7.12 Inc. VAT

  • MetaSole+ LANDSCAPE - High Top-Powerland

    Powerland MetaSole+ LANDSCAPE - High Top

    Part No: REN-420423 Mounting - Roof Anchor- Trapezoidals RENUSOL METASOLE+  Rooftop mounting system for trapezoidal and corrugated sheet metal roofs. 125mm long rail, 72mm high.  High Top design raises PV modules higher from the roof surface to increase ventilation and thereby increase the performance of the modules in high temperature applications. 100mm distance to the roof. Short, non-continuous rails lead to material saving solar installation on trapezoidal sheet. Horizontal PV module orientation PV modules with a frame height of 30 to 50 mm are attached to the MS+ HT mounting system in landscape, arranged in columns on the trapezoidal sheet. Installation without pilot drilling - self-tapping screws fix the MS+P PV mounting system directly to the trapezoidal sheet. For trapezoidal steel sheet 0.4-1.25mm thickness and aluminium sheet 0.5-2.00mm thickness Readymade kits suitable for the installation of PV systems on trapezoidal sheet steel and / or aluminium in various thicknesses.  MS+ HT consists of 1 x High Top Mounting Plate and 2 x REN-400281 screws (not sold separately)   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.

    £8.43 Exc. VAT

    £10.12 Inc. VAT

  • Self drilling screw for Al 0,50-1,25 mm or steel 0,40-1,25 mm-Powerland

    Powerland Self drilling screw for Al 0,50-1,25 mm or steel 0,40-1,25 mm

    Part No: REN-400301 Mounting - Roof Anchor- Trapezoidals SW8 5.5X25 E16 8mm hex head Steel thickness (0.50 -1.25mm) Aluminium thickness (0.40 - 1.25mm) Keywords: REN400301, Renusol, PV Mounting, Roof Anchor- Trapezoidal   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:400301 Weight:0.01 kg

    £0.72 Exc. VAT

    £0.86 Inc. VAT

  • SingleFix Pro for corrugation heights from 22 mm (1 piece)-Powerland

    Powerland SingleFix Pro for corrugation heights from 22 mm (1 piece)

    Part No: SLT-113009-003 Mounting - Roof Anchor- Trapezoidals SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm.     SingleFix Pro for corrugation heights from 22 mm (1 piece).    Screws must be ordered separately as needed (2 pieces for each SingleFix Pro)   Used in connection with Solo mounting rails The easy solution for mounting in Portrait on IBR roofs. This part No represents one of Singlefix plate SLT-113009-003 x 1 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail. Note : Screws needs to be purchased seperately SLT-943000-360 Supplier Part No: 113009-003 Weight: 0.035 kg PV Light: R2+

    £1.50 Exc. VAT

    £1.80 Inc. VAT

  • SingleFix Pro for corrugation heights from 22 mm (2 pieces)-Powerland

    Powerland SingleFix Pro for corrugation heights from 22 mm (2 pieces)

    Part No: SLT-113009-003-KIT Mounting - Roof Anchor- Trapezoidals This part is made up of the following items: 2 x  SingleFix Pro for corrugation heights from 22 mm (1 piece)   4 x  Screw 6.0 x25 self-tapping A2 with sealing washer   SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm.     SingleFix Pro for corrugation heights from 22 mm (2 pieces).    Screws must be ordered separately as needed (2 pieces for each SingleFix Pro)   Used in connection with Solo mounting rails   This part No represents one of Singlefix plate SLT-113009-003 x 2 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail.   Note : Screws needs to be purchased seperately SLT-943000-360 Weight: 0.09 kg PV Light: R2+

    £4.37 Exc. VAT

    £5.24 Inc. VAT

Powerland’s solar mounting systems are built to safely and efficiently install your solar panels, ensuring they are positioned for maximum energy output while maintaining the structural integrity of your roof. We also offer a range of installation options, so please feel free to contact us today!

Forgot Password


Back to top