If You Haven't Already Done So Register Here For Trade Account

Solar Panel Fitting & Mounting Kits

12 products

  • Standing seam clamp Saddle Clamp 504 - Powerland Renewable Energy

    Standing seam clamp Saddle Clamp 504

    Part No: SLT-112001-010 Mounting - Roof Anchor- Seam Clamps Seam clamp 504 AL KK for standing seam roof   Especially suitable for double lock standing seam roofs made of titanium zinc sheet metal.   Supplier Part No: 112001-010 Weight: 0.17 kg PV Light: R2+

    £6.83 Exc. VAT

    £8.20 Inc. VAT

  • Seam clamp 522 Rapid Zambelli RibRoof500 and similar designs - Powerland Renewable Energy

    Seam clamp 522 Rapid Zambelli RibRoof500 and similar designs

    Part No: SLT-112004-002 Mounting - Roof Anchor- Seam Clamps SHEET METAL SEAM CLAMPS Please note: The tightening torque must be limited so that the sheet metal seam does not become distorted and the thermal lengthening of the sheets is not prevented! Folding clamp 522 AL Rapid Zambelli RibRoof500 and similar   Non-penetrative clamps   Supplier Part No: 112004-002 Weight: 0.14 kg PV Light: R2+

    £3.59 Exc. VAT

    £4.31 Inc. VAT

  • Seam clamp 503 Rapid for standing seam roof - Powerland Renewable Energy

    Seam clamp 503 Rapid for standing seam roof

    Part No: SLT-112001-005 Mounting - Roof Anchor- Seam Clamps Seam clamp 503 Rapid for standing seam roof Please note: In case of roofs made of titanium zinc sheet metal, please verify that the standing seams have sufficient load-bearing capacity! Keywords: SLT112001000, Schletter, PV Mounting, Roof Anchor- Seam Clamp   Supplier Part No: 112001-005 Weight: 0.115 kg PV Light: R2+

    £3.59 Exc. VAT

    £4.31 Inc. VAT

  • Seam clamp GXM 10 Mini Insert ( for K-Grip Mini ) (BTO UK)-Powerland

    Seam clamp GXM 10 Mini Insert ( for K-Grip Mini ) (BTO UK)

    Part No: REN-400288 Mounting - Roof Anchor- Seam Clamps S-5-GXM 10 Mini insert - specifically for use with the S-5-K Grip Mini clamp. Insert options: LYSAGHT KLIP-LOK® 406 McElroy Metal Mirage AEP Span Klip-Rib® Metal Sales Clip-Loc SpeedDeck® SpeedDeck® Safintra Saflok 410 Safintra Saflok 700 Domico Dach® And other similar profiles   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400288 Weight: 0.02 kg

    £2.12 Exc. VAT

    £2.54 Inc. VAT

  • Renusol Seam Clamp K-Grip Mini with GX 10 Mini insert-Powerland

    Renusol Seam Clamp K-Grip Mini with GX 10 Mini insert

    Part No: REN-K-GRIP-M-10 Mounting - Roof Anchor- Seam Clamps This part is made up of the following items: 1 x  Renusol Seam Clamp K-Grip Mini (Without Screws)   1 x  Seam clamp GXM 10 Mini Insert ( for K-Grip Mini ) (BTO UK)   Designer note: The Renusol seam clamps are part of the S5 range. You can see more details on manufacturers website.   The S-5-K Grip clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options. The S-5-K Grip Mini is a bit shorter than the S-5-K Grip and has one base bolt rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!   This is a complete Seam clamp with GX 10 Mini inserts.   UK only: The clamps should meet or exceed the requirements for MCS012 wind uplift values, but since they are not officially MCS012 tested and certified, they should not be used on <50kWp installations.    Weight: 0.13 kg

    £9.55 Exc. VAT

    £11.46 Inc. VAT

  • Seam Clamp GXM 50 Mini Insert ( for K-Grip Mini ) (BTO UK)-Powerland

    Seam Clamp GXM 50 Mini Insert ( for K-Grip Mini ) (BTO UK)

    Part No: REN-400285 Mounting - Roof Anchor- Seam Clamps GXM 50 Mini insert - specifically for use with the S-5-K Grip Mini clamp. Insert options: LYSAGHT KLIP-LOK Classic® 700 LYSAGHT KLIP-LOK 700 Hi-Strength® Stramit® Speed Deck Ultra® Fielders KingKlip® 700 And other similar profiles   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:GX50-A-1 Weight:0.01 kg

    £2.07 Exc. VAT

    £2.48 Inc. VAT

  • Renusol Seam Clamp K-Grip Mini with GX 50 Mini insert-Powerland

    Renusol Seam Clamp K-Grip Mini with GX 50 Mini insert

    Part No: REN-K-GRIP-M-50 Mounting - Roof Anchor- Seam Clamps This part is made up of the following items: 1 x Renusol Seam Clamp K-Grip Mini (Without Screws)   1 x  Seam Clamp GXM 50 Mini Insert ( for K-Grip Mini ) (BTO UK)   Designer note: The Renusol seam clamps are part of the S5 range. You can see more details on manufacturers website. The S-5-K Grip clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options. The S-5-K Grip Mini is a bit shorter than the S-5-K Grip and has one base bolt rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!   This is a complete Seam clamp with GX 50 Mini inserts.   UK only: The clamps should meet or exceed the requirements for MCS012 wind uplift values, but since they are not officially MCS012 tested and certified, they should not be used on <50kWp installations.    Weight:0.12 kg

    £9.50 Exc. VAT

    £11.40 Inc. VAT

  • Renusol Seam Clamp R-465 mini-Powerland

    Renusol Seam Clamp R-465 mini

    Part No: REN-420563 Mounting - Roof Anchor- Seam Clamps Designer note: The Renusol seam clamps are part of the S5 range. You can see more details on manufacturers website UK only: These clamps are now MCS012 certified with Renusol VariosoleRenusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. UK: This product will be Buy to Order only.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No:R420563 Weight:0.19 kg

    £9.65 Exc. VAT

    £11.58 Inc. VAT

  • Renusol Seam Clamp KL+-Powerland

    Renusol Seam Clamp KL+

    Part No: REN-400602 Mounting - Roof Anchor- Seam Clamps Renusol Seam Clamp KL+   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.     Supplier Part No:400602 Weight:0.19 kg

    £5.87 Exc. VAT

    £7.04 Inc. VAT

  • Renusol Seam Clamp S-Mini-Powerland

    Renusol Seam Clamp S-Mini

    Part No: REN-420259 Mounting - Roof Anchor- Seam Clamps Designer note: The Renusol seam clamps are part of the S5 range. You can see more details on manufacturers website. UK only: These clamps are now MCS012 certified with Renusol Variosole +   Supplier Part No:420259 Weight:0.11 kg

    £6.20 Exc. VAT

    £7.44 Inc. VAT

  • Seam clamp 503 standing seam roof VA-Powerland

    Seam clamp 503 standing seam roof VA

    Part No: SLT-112001-000 Mounting - Roof Anchor- Seam Clamps Seam clamp 503 VA for standing seam roof Please note: In case of roofs made of titanium zinc sheet metal, please verify that the standing seams have sufficient load-bearing capacity! Keywords: SLT112001000, Schletter, PV Mounting, Roof Anchor- Seam Clamp   Supplier Part No:112001-000 Weight:0.33 kg PV Light:R2+

    £6.94 Exc. VAT

    £8.33 Inc. VAT

  • Standing seam clamp 510 AL Rapid for KalZip and similar designs-Powerland

    Standing seam clamp 510 AL Rapid for KalZip and similar designs

    Part No: SLT-112002-003 Mounting - Roof Anchor- Seam Clamps SHEET METAL SEAM CLAMPS Please note: The tightening torque must be limited so that the sheet metal seam does not become distorted and the thermal lengthening of the sheets is not prevented! Folding clamp 510 AL Rapid for KalZip and similar. Non-penetrative clamps   Supplier Part No:112002-003 Weight:0.12 kg PV Light:R2+

    £3.59 Exc. VAT

    £4.31 Inc. VAT

Forgot Password


Back to top