Solax Power Inverters

 Part No: X1-AC-3.6 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Supplier Part No: X1-AC-3.6 Charger Weight: 18 kg Rated Power: 3,680 W Data Sheet Solax X1 AC coupled

Read more less

The X1-FIT G4 5.0kW W allows you to generate energy from your solar panels during the day and directs excess energy to the battery, ready for later use. In the event of a power cut the X1 FIT 'W' will use the stored power and act as an emergency power supply (EPS). For G100 Applications, please contact SolaX to perform a software update remotely when the product is installed. Additionally, the SolaX CHINT single phase CT energy meter is recommended. Key Features: VPP Function Remote Upgrade and Control Max. 110% nominal apparent AC power Flexible Peak Shaving Compatible with WiFi V2.0   AC attributes Max power: 5000W Max current: 40A Number of phases: 1 System Max efficiency 97% IP rating IP65 Weight 23kg Dimensions 482*417*181mm  

Read more less