Solar Panel Fitting & Mounting Kits

Part No: RED-HOOKSTOP Mounting - Roof Flashings Plain tiles are notorious for breaking and can be quite expensive to replace, their fragility often results in such installations taking a longer amount of time to complete to avoid damaging the roof. This simple product negates this problem by allowing the roof hook to distribute the weight of the system (or installer) through the Hookstop and into the roof (as opposed to the weight being distributed directly onto one of the plain/rosemary tiles – resulting in damage). The Hookstop is an impact-absorbing pad designed made of recycled rubber, called Rypol, designed to replace individual roof tiles typically on a plain tile (rosemary) installation. You may have come across it on playgrounds and sports surfaces. “It completely eliminates the problem on Rosemary tiled roofs of installers standing on the mounting rail and the downward flexing of the roof hook, cracking the roof tile. Hookstop, prevents this by absorbing the roof hook flexing; it significantly speeds up installation time and the cost is largely offset because there is no lead work needed.” – an installer.   Supplier Part No: RED-HOOKSTOP Weight: 0.53 kg

Read more less

Part No: GEN-SPEEDFLASH Mounting - Roof Flashings For use on all slate roofs with 3-inch head-lap 1 x SpeedFlash® Base and Cap 2 x Shims (packings) 1 x Foam Insert 1 x Spring support Unlike the SolarFlash®, you do not need to remove any slates. This significantly reduces installation time and the requirement for roofing experience. The SpeedFlash concept retains all the benefits of the SolarFlash®; i.e. no requirement for drilling, avoidance of load bearing and preventing water ingress, thereby maintaining the integrity of the roof. SpeedFlash Demonstration Video   Supplier Part No: SPF005 Weight: 0.4 kg

Read more less

Part No: GEN-SLATE Mounting - Roof Flashings SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims 3 x Hallhooks 1 x Hookpull 3 x Compensation hooks   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know.    Supplier Part No: SKI001 Weight: 0.34 kg

Read more less

Part No: GEN-INTERFLASH Mounting - Roof Flashings InterFlash™ Kit 1 x plastic InterFlash™ to sit under the Renusol RH Flat bracket.   Supplier Part No: InterFlash Weight: 0.32 kg

Read more less

Part No: GEN-SPEEDFLASHSHIELD Mounting - Roof Flashings SpeedFlash® Shield is a tool that installers will need during installation to protect the lower course of slates. A SpeedFlash® Shield should last at least 40 SpeedFlash® installs, this will be determined by the user. The shields purpose is to protect the lower course of slates. Take care to avoid contact with angle grinder to prolong shield life. Supplier Part No: SPF008 Weight: 0.4 kg

Read more less

Part No: GEN-SLATE-NEW Mounting - Roof Flashings SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005.    Supplier Part No: SFS001 Weight: 0.24 kg

Read more less

Part No: GEN-FT-TILE Mounting - Roof Flashings SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Small SolarFlash (H 235mm by W 251mm) 1 x Weather stop foam 2 x Shims   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible. Non compatible components are: SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know.    Supplier Part No: SFS003 Weight: 0.16 kg

Read more less

Part No: GEN-SPEEDFLASH-PACK Mounting - Roof Flashings This part is made up of the following items: 40 x GEN-SPEEDFLASH Genius Roof - Speed Flash   2 x GEN-SPEEDFLASHSHIELD Genius Roof - Speed Flash Shield   For use on all slate roofs with 3-inch head-lap 1 x SpeedFlash® Base and Cap 2 x Shims (packings) 1 x Foam Insert 1 x Spring support Unlike the SolarFlash®, you do not need to remove any slates. This significantly reduces installation time and the requirement for roofing experience. The SpeedFlash concept retains all the benefits of the SolarFlash®; i.e. no requirement for drilling, avoidance of load bearing and preventing water ingress, thereby maintaining the integrity of the roof.   SpeedFlash® Shield is a tool that installers will need during installation to protect the lower course of slates. A SpeedFlash® Shield should last at least 40 SpeedFlash® installs, this will be determined by the user. The shields purpose is to protect the lower course of slates. Take care to avoid contact with angle grinder to prolong shield life

Read more less

Part No: GEN-P-TILE Mounting - Roof Flashings The FlexiFlash is the same size as the ‘small’ SolarFlash, made from a flexible material which allows it to mould around the curves on a profile tile. The aluminium support has been included to support the flexible back of the FlexiFlash and must be used. There is a foam included in every kit which is required to seal the hood. The foam was designed with snow in mind to stop wind taking light snow into the roof. The length of the ‘FlexiFlash’ is based on tiles being single lap (up to 100mm head lap). FlexiFlash Width - 250mm Length - 235mm Hood Wide - 50mm Length - 140mm Depth - 40mm Each kit contains: 1 x FlexiFlash 2 x Shims (packings) 1 x Foam Insert 1 x Metal Support 2 x Nails

Read more less

Part No: GSE-ART106044 Mounting - In Roof Semi Rigid Bottom Flashing 

Read more less

Part No: GSE-ART106072 Mounting - In Roof GSE Tile Support 25x40

Read more less

Part No: GSE-TILES-SUP-HOOK Mounting - In Roof ART106100 - Hook for Tiles Support

Read more less

Part No: UBIFLEX-B3-400X12 Mounting - Roof Flashings UBIFLEX NON-LEAD FLASHING BLACK 400mm x 12m   Why use lead? Use Ubiflex instead! No scrap value – no risk of theft. Saves time & money – up to 50% quicker to install than lead. No toxic risk – environmentally friendly and recyclable. 80% lighter than lead – less risk of injury. BRE wind tunnel tested, BBA Certified and approved by NHBC (B3 only). 25 year guarantee (B3 only).   Ubiflex Part No 534040   Supplier Part No: 534040 Weight: 18 kg

Read more less

Part No: UBIFLEX-HIGH-TACK-SEALANT Mounting - Roof Flashings Ubiflex High Tack sealant for sealing Ubiflex down to tiles, slates and overlap joints.   Ubbink Part no; 534066   Supplier Part No: 534066 Weight: 0.53 kg  

Read more less

Part No: GEN-SLATE-HOOKS Mounting - Roof Flashings The Hallhook was invented by a slater and tiler with 45 years of trade under his belt who couldn't stand to see a slate tiled roof covered with unsightly lead or copper straps. He tried all other available slate repairs such as straps, blobs of silicone, plastic proucts that are not only unsightly but time-consuming to install, etc. and then went on to develop the Hallhook.  When to use the Hallhook™  For general repair After solar panel bracket mounting After roof light/window installation After installing slate vents This is a pack of 10 pcs.   Supplier Part No:HHK001 Items in this pack:10 Weight:0.14 kg  

Read more less