Victron Energy

The LiFePO4 Battery 12.8V/200Ah NG from Victron Energy delivers powerful energy storage in a robust and scalable system. This battery uses Lithium Iron Phosphate (LiFePO4) technology, renowned for its safety and efficiency, and is perfect for building energy storage systems for demanding applications. Whether you need to create a 12V, 24V, or 48V battery bank, this 200Ah battery provides the flexibility and capacity to support up to 50 batteries in a single system, with a total storage capacity of up to 384kWh. The integrated Battery Temperature and Voltage control system (BTV) in this 12.8V/200Ah battery manages individual cell voltages and temperatures, ensuring safe and balanced operation. In the event of any irregularities, such as high or low voltages or temperatures, the system triggers an alarm. When paired with an external Battery Management System (BMS), real-time data such as battery voltage, current, and temperature can be monitored via VictronConnect or a GX communication centre. Integrated BTV: Manages and balances battery cell voltages and temperatures for maximum safety and performance. Expandable Storage: Supports up to 50 batteries, allowing for large-scale energy storage solutions of up to 384kWh. Real-Time Monitoring: View battery parameters such as voltage, temperature, and charge status via VictronConnect or a GX device. IP65 Protection: Sealed against dust and protected from water exposure, making it ideal for outdoor or harsh conditions. Low Self-Discharge: A self-discharge rate of only 3% per month ensures long-lasting reliability and readiness. The LiFePO4 Battery 12.8V/200Ah NG is designed to deliver high charge and discharge currents, allowing for fast charging and efficient power usage. Its lightweight and compact design, combined with high energy density, makes it ideal for off-grid systems, residential energy storage, or large-scale commercial setups. With optional mounting brackets, this battery can be easily installed and secured in a variety of environments. Whether you need a reliable backup power source or a scalable energy storage system, the LiFePO4 Battery 12.8V/200Ah NG from Victron Energy offers advanced technology, unmatched safety, and real-time monitoring capabilities to meet your energy needs. Nominal Voltage 12.8 V Nominal Capacity @ 25 °C 200 Ah Nominal Energy @ 25 °C 2560 Wh Capacity Loss <1% per 100 cycles Energy Loss <1% per 100 cycles Round Trip Efficiency 92%

Read more less

The 12/3000-120-32 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 12/3000/120-32 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a Cerbo GX you can monitor and control your MultiPlus-II 12/3000 and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more…” If you want to access directly, use the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50. Why not look at the VE.Bus Smart dongle which measures battery voltage and temperature allowing monitoring and control with a smart phone or other Bluetooth enabled device. Brand Victron Energy Max. Battery Charge Current 120A Warranty 5 Years Weight 19Kg

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number CMP242200000 Voltage 24 Transfer Switch (A) 30 Cont. Output Power at 25°C (VA) 2000 Peak Power (W) 4000 Max Efficiency 94% Zero Load Power (W) 11 Charge Current House Battery (A) 50 Charge Current Starter Battery (A) 4 (12 V and 24 V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H520 x W255 x D125mm Weight (kg) 12 Warranty 5 Years Country of Manufacture India

Read more less

LiFePO4 Battery 25.6V/100Ah NG BAT524110620 The LiFePO4 Battery 25.6V/100Ah NG from Victron Energy is a versatile energy storage solution designed to provide reliable, long-lasting power for a variety of applications. With its 25.6V nominal voltage and 100Ah capacity, this battery is perfect for systems requiring higher voltage configurations such as 24V or 48V setups. Utilizing advanced Lithium Iron Phosphate (LiFePO4) technology, this battery delivers exceptional safety, efficiency, and durability, making it suitable for both residential and commercial installations. Enhanced Safety and Control Features This battery includes an integrated Battery Temperature and Voltage control system (BTV) that monitors individual cells, ensuring optimal performance by balancing voltages and managing temperature. The system generates alarms when necessary, protecting the battery from damage due to over-voltage, under-voltage, or extreme temperatures. For comprehensive management, a Battery Management System (BMS), sold separately, is required. The BMS allows you to monitor battery status in real-time using VictronConnect or a GX communication centre. Features Integrated BTV System: Ensures safe operation by balancing cell voltages and managing temperatures. Scalable System: Supports up to 50 batteries in parallel for large-scale energy storage solutions. IP65 Protection: Offers dust and water resistance for durability in challenging environments. Low Self-Discharge Rate: With a self-discharge rate of just 3% per month, the battery stays ready for long-term use. Ideal for Higher Voltage Applications The LiFePO4 Battery 25.6V/100Ah NG is specifically designed to provide higher voltage energy storage solutions. With its compact and lightweight design, this battery can be easily integrated into larger energy systems, offering scalability for future expansion. Bracket mounting ensures a secure and simple installation, while the high energy density allows you to store more power in less space. Whether you need reliable energy for off-grid homes, commercial setups, or industrial applications, the LiFePO4 Battery 25.6V/100Ah NG delivers the safety, performance, and scalability needed for today’s demanding power requirements. Brand Victron Energy Battery Technology Lithium Iron Phosphate (LiFePO4) Charge Voltage 27

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).   Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.   PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.   PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.   Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.   System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.   Brand Victron Energy Manufacturer Part Number PMP122200000 GTIN 8719076052135 Voltage 12V Cont. Output Power at 25°C 2000VA Peak Power 3500W Output AC Voltage 230V Transfer Switch 35A Charge Current House Battery 80A Charge Current Starter Battery 1A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H506 x W236 x D147mm Weight 15.5Kg Warranty 5 Years

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.   Brand Victron Energy Manufacturer Part Number CMP122200000 Voltage 12 Transfer Switch (A) 30 Cont. Output Power at 25°C (VA) 2000 Peak Power (W) 3500 Max Efficiency 93% Zero Load Power (W) 9 Charge Current House Battery (A) 80 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H520 x W255 x D125mm Weight (kg) 12 Warranty 5 Years Country of Manufacture India

Read more less

Victrons new 24V inverter/charger The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).  It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control Monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more… Brand Victron Energy Max. Battery Charge Current 120A Warranty 5 Years Weight 19Kg

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP485021010 Voltage 48 Transfer Switch (A) 100 Cont. Output Power at 25°C (VA) 5000 Peak Power (W) 10000 Max Efficiency 95% Zero Load Power (W) 35 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 4 (12 V and 24 V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H444 x W328 x D240mm Weight (kg) 30 Warranty 5 Years Country of Manufacture India

Read more less

  Discover advanced solar management with the Victron SmartSolar MPPT RS, a robust charge controller designed for large solar arrays and versatile battery systems. Whether you’re managing a sprawling off-grid setup or a sophisticated grid-connected system, this controller is your gateway to improved energy efficiency and system control. Key Features: Dual Model Capability: Choose between 5.76kW or 11.52kW models to suit your system’s power needs. Wide Voltage Range: Accommodates a solar voltage input from 65 to 450 VDC, ensuring compatibility with various solar setups. Multiple MPPT Trackers: Enhances solar collection efficiency with independent tracking inputs that adjust to multiple roof orientations and shading conditions. Enhanced Connectivity: Fully programmable via the VictronConnect app using Bluetooth for easy setup and real-time monitoring. Superior Safety Features: Features isolated PV connections and a new metal case design that covers all electrical connections for added safety and durability. Active Cooling and Modern Design: Keeps the controller operating efficiently while aligning with the sleek, modern aesthetics of the latest Victron product suite. Ultra-Fast Maximum Power Point Tracking (MPPT): The SmartSolar RS efficiently charges your 48V battery bank with options of 100A or 200A outputs. Tailor the charge settings to accommodate different battery chemistries including lead-acid and lithium. Setup and Monitoring Made Easy: Control and configure your SmartSolar RS remotely via VictronConnect, offering detailed system insights such as battery and PV performance, historical data, and system trends. Expandable System Control: Easily integrate additional SmartSolar RS or VE.Can MPPT units via daisy chaining, allowing for synchronized charge management and consolidated data reporting through a GX device like the Cerbo GX. Remote System Management: With a GX device connected to the internet, access the Victron Remote Management Portal (VRM) for comprehensive control and monitoring, ensuring optimal performance anywhere at any time. For remote locations, maintain oversight with optional GlobalLink 520 connectivity. SmartSolar Display: Stay informed with the integrated display showing real-time data on battery voltage, charge current, and more. Monitor each solar array independently and check for any system errors directly from the front panel. I/O Connections and Safety: Includes options for remote temperature and voltage sensing to enhance system responsiveness and safety. The controller also monitors PV isolation resistance to prevent faults and maintain system integrity. Brand Victron Energy Dimensions 440 x 313 x 126mm Rated Charge Current 100 A Voltage 48 V

Read more less

The EasySolar 12/1600-70-16 combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar 12/1600-70-16 All-in-one solar power solutionThe EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure.The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar 12/1600, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50 The MK3-USB allows the EasySolar to connect to a computer for configuration and firmware updates. Looking to go off grid? Why not look at the TN Power lithium battery range. A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50% Features Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions Built-in automatic protection for over-charge, over discharge, over current and over temperature Free of maintenance Internal cell balancing Lighter weight: About 40% -50% of the weight of a comparable lead acid battery Can be charged using most standard lead-acid charges (set) Wider temperature range:-20°C-60°C Support for Series application expansion (up to 51.2V) and two in parallel Brand Victron Energy Charge Current Starter Battery 4A Warranty 5 Years Weight 15Kg

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP242300001 Voltage 24 Transfer Switch (A) 16 or 50 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 94% Zero Load Power (W) 20 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 4 (12 V and 24 V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 18 Warranty 5 Years Country of Manufacture India

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.   Brand Victron Energy Manufacturer Part Number PMP122300001 Voltage 12 Transfer Switch (A) 50 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

Read more less

The EasySolar 24/1600-40-16 combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar 24/1600-40-16 All-in-one solar power solutionThe EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure.The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar 24/1600, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50 The MK3-USB allows the EasySolar to connect to a computer for configuration and firmware updates. Looking to go off grid? Why not look at the TN Power lithium battery range. A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50% Features Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions Built-in automatic protection for over-charge, over discharge, over current and over temperature Free of maintenance Internal cell balancing Lighter weight: About 40% -50% of the weight of a comparable lead acid battery Can be charged using most standard lead-acid charges (set) Wider temperature range:-20°C-60°C Support for Series application expansion (up to 51.2V) and two in parallel Brand Victron Energy Charge Current Starter Battery 4A Warranty 5 Years Weight 15Kg

Read more less

The EasySolar-II 48/5000 GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar-II 48/5000 GX The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device on the EasySolar-II includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port An Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar-II 48/5000 GX, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50 The MK3-USB allows the EasySolar-II to connect to a computer for configuration and firmware updates.

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP242301011 GTIN 8719076045175 Voltage Transfer Switch 30A Cont. output power at 25°C 3000VA Peak power 6000W Max Efficiency 94% Zero load power 20W Charge Current House Battery 70A Charge Current Starter Battery 4A Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight 18Kg Warranty 5 Years Country of Manufacture India

Read more less

Building upon the success of the Lithium Smart Series, the NG (Next Generation) series incorporates significant enhancements. Looking for a robust, efficient, and durable battery for your energy needs? The Victron LiFePO4 Battery 12.8V/300Ah NG is your perfect companion for off-grid setups, campervan conversions, marine applications, and energy storage systems. Built by Victron Energy, a trusted leader in energy technology, this battery is designed to provide exceptional performance, longevity, and safety. Key Features and Benefits High Energy Density: The Victron LiFePO4 Battery delivers 12.8V with a 300Ah capacity, offering consistent and reliable power output for demanding applications. It’s ideal for running appliances like fridges, induction cookers, and laptops. Durable Lithium-Iron Phosphate Technology: With LiFePO4 chemistry, this battery ensures longer lifespan compared to traditional lead-acid batteries. Its robust construction is resistant to deep cycling, making it perfect for frequent and intensive use. Built-In Battery Management System (BMS): The integrated Smart BMS protects against overcharging, deep discharging, and overheating, ensuring maximum safety and optimised battery performance. The BMS also balances the cells to extend battery life. Lightweight and Compact Design: Weighing significantly less than traditional batteries, the compact size of the Victron LiFePO4 Battery is perfect for saving space in tight installations, whether in campervans, yachts, or renewable energy systems. Why Choose the Victron LiFePO4 Battery 12.8V/300Ah NG? Unmatched Longevity: With up to 5000 cycles at 50% depth of discharge, this battery is an investment that pays off over years of reliable service Versatile Applications: Suitable for off-grid solar systems, campervan energy solutions, marine use, and backup power systems. Peace of Mind: Designed by Victron Energy, a global leader renowned for producing high-quality energy storage products. Enhanced Efficiency: Faster charging and greater depth of discharge mean more usable power for your energy needs. Specifications Voltage: 12.8V Capacity: 300Ah Max Continuous Discharge: 300A Max Charge Current: 300A Dimensions (H x W x D): 206 x 447 x 205mm Weight: 29kg Battery Type: Lithium Iron Phosphate (LiFePO4) Ideal for Your Off-Grid Lifestyle Whether you’re upgrading your campervan build, setting up a reliable solar energy storage system, or needing a dependable power source for marine adventures, the Victron LiFePO4 Battery 12.8V/300Ah NG offers unparalleled efficiency and reliability. This is the battery you can trust to deliver consistent power without compromise, backed by Victron Energy’s legacy of innovation and quality. Don’t settle for less – power your future with the Victron LiFePO4 Battery today. Highlights Multiple improvements including added read-out of cell voltages and temperatures Maximum single bank size increased to 385kWh Protection class IP65 Bracket mounting and strap mounting Brand Victron Energy Battery Technology Lithium Iron Phosphate (LiFePO4) Dimensions 206 x 447 x 205mm Voltage 12.8V

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.   Brand Victron Energy Manufacturer Part Number PMP123021010 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

Read more less

FeaturesHybrid Inverter/ChargerThe Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with 450VDC 4kWp PV input.Combination of an inverter, AC charger, and Solar MPPTThe inverter produces a perfect sine wave, and able to supply high powered appliances. It is also bi-directional, charging the battery when excess solar power or AC supply is available, or converting from the battery when it is needed.Wide MPPT voltage range80 – 450VDC, with a 120 VDC PV startup voltage.Light weight, efficient and quietThanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.Display, Bluetooth and VictronConnect appThe display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device, using the VictronConnect app.Extendable PV capacity, both AC-coupled and DC-coupledThe integrated 4kWp PV capacity can be extended by adding Solar Chargers to the system, for example our Smart Solar Charger range, including the Smart Solar RS models. When connected in a VE.Can network, all battery charging will operate synchronously and coordinated.Alternatively, the PV capacity can be extended by installing PV Inverters, of which the output power will be automatically controlled by the integrated Frequency Shift Power Control.Communication portsVE.Can connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring.I/O ConnectionsProgrammable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS.

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely Brand Victron Energy Manufacturer Part Number PMP245021010 GTIN 8719076024033 PowerControl/PowerAssist Yes Transfer Switch 100A Cont. Output Power at 25°C 5000VA Peak power 10000W Maximum efficiency 94% Zero load power 30W Charge Current House Battery 120A Charge Current Starter Battery 4A (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes VE.Bus Communication Port For parallel and three phase operation, remote monitoring and system integration Remote on-off Yes Protection Category IP21 Battery-Connection Four M8 bolts (2 plus and 2 minus connections) Dimensions H444 x W328 x D240mm Weight 30Kg Warranty 5 Years Country of Manufacture India

Read more less

The SmartSolar MPPT RS solar charge controllers are Victron’s solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid connected battery systems. Available in a 5.76kW and 11.52kW model, features include a wide 65-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernise the presentation in line with the latest suite of Victron products. MPPT: Ultra Fast Maximum Power Point Tracking The SmartSolar RS solar charge controller connects to a PV array of between 65 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A. The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium and more. Setup and monitor with VictronConnect The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect app. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends. Daisy Chain Additional Units The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy chained” to each other with an RJ45 cable. When connected to each other, all individual charge controllers, will synchronise their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX). Remote Monitoring and Control If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers. If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free.  For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520. SmartSolar Display The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes. I/O Connections The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals. Brand Victron Energy Weight 16.5 Data Communication Port VE.Direct port, VE.Can port & Bluetooth Efficiency 96%  

Read more less

Building upon the success of the Lithium Smart Series, the NG (Next Generation) series incorporates significant enhancements. Looking for a robust, efficient, and durable battery for your energy needs? The Victron LiFePO4 Battery 25,6V/200Ah NG is your perfect companion for off-grid setups, campervan conversions, marine applications, and energy storage systems. Built by Victron Energy, a trusted leader in energy technology, this battery is designed to provide exceptional performance, longevity, and safety. Key Features and Benefits High Energy Density: The Victron LiFePO4 Battery delivers 25.6V with a 200Ah capacity, offering consistent and reliable power output for demanding applications. It’s ideal for running appliances like fridges, induction cookers, and laptops. Durable Lithium-Iron Phosphate Technology: With LiFePO4 chemistry, this battery ensures longer lifespan compared to traditional lead-acid batteries. Its robust construction is resistant to deep cycling, making it perfect for frequent and intensive use. Built-In Battery Management System (BMS): The integrated Smart BMS protects against overcharging, deep discharging, and overheating, ensuring maximum safety and optimised battery performance. The BMS also balances the cells to extend battery life. Lightweight and Compact Design: Weighing significantly less than traditional batteries, the compact size of the Victron LiFePO4 Battery is perfect for saving space in tight installations, whether in campervans, yachts, or renewable energy systems. Why Choose the Victron LiFePO4 Battery 25,6V/200Ah NG? Unmatched Longevity: With up to 5000 cycles at 50% depth of discharge, this battery is an investment that pays off over years of reliable service Versatile Applications: Suitable for off-grid solar systems, campervan energy solutions, marine use, and backup power systems. Peace of Mind: Designed by Victron Energy, a global leader renowned for producing high-quality energy storage products. Enhanced Efficiency: Faster charging and greater depth of discharge mean more usable power for your energy needs. Specifications Voltage: 25.6V Capacity: 200Ah Max Continuous Discharge: 200A Max Charge Current: 200A Dimensions (H x W x D): 235 x 648 x 162mm Weight: 37kg Battery Type: Lithium Iron Phosphate (LiFePO4) Ideal for Your Off-Grid Lifestyle Whether you’re upgrading your campervan build, setting up a reliable solar energy storage system, or needing a dependable power source for marine adventures, the Victron LiFePO4 Battery 25,6V/200Ah offers unparalleled efficiency and reliability. This is the battery you can trust to deliver consistent power without compromise, backed by Victron Energy’s legacy of innovation and quality. Don’t settle for less – power your future with the Victron LiFePO4 Battery today. Highlights Multiple improvements including added read-out of cell voltages and temperatures Maximum single bank size increased to 385kWh Protection class IP65 Bracket mounting and strap mounting Brand Victron Energy Battery Technology Lithium Iron Phosphate (LiFePO4) Dimensions 235 x 648 x 162mm Voltage 25.6V

Read more less

The Victron Quattro 48/10000/140-100/100 120V VE.Bus is an all-in-one inverter and charger designed to deliver reliable, uninterrupted power. Supporting up to two independent AC inputs, such as shore power and a generator, the Quattro automatically connects to the active source, ensuring smooth transitions during power changes. With no-break functionality, even sensitive equipment like computers remain unaffected by grid outages or power source shifts, as the Quattro takes over in less than 20 milliseconds. This model provides robust adaptive charging and hybrid PowerAssist technology, preventing overloads on limited AC sources by drawing additional power from the batteries when needed. Moreover, the Quattro supports parallel operation for virtually unlimited power output, and can also be configured for three-phase or split-phase setups, making it adaptable to various high-demand environments. Remote monitoring and control through a GX device like the Cerbo GX allows you to manage your power system remotely via the Victron Remote Management (VRM) portal from anywhere in the world, using a phone, tablet, or PC. IMPORTANT NOTICE: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. Brand Victron Energy Manufacturer Part Number QUA481030010 gtin 8.72E+12 Voltage 48V

Read more less

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Features of the – Victron MultiPlus-II 12V/5000VA Inverter/Charger 220-50A – 230V A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel (not for the 8k, 10k and 15k models) and three phase operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Input Voltage Range 9.5 – 17 VDC Max Efficiency 95% Weight 33Kg

Read more less