Sunsynk 50kW, HV Three Phase Hybrid Inverter

Product Features

• Four MPPT trackers giving allowance to flexible PV array configurations.
• Allows DC oversizing up to 30% more than the rated AC power.
• Unit can be operated without batteries (using PV and grid power).
• Supports Wi-Fi remote monitoring as standard.
• Type II DC/AC SPD as standard.
• Overload, over temperature and short circuit protection as standard.

Up to 10 x 50kW inverters can be connected in a parallel configuration, with each inverter having its own batteries connected to it. 

It is highly recommended that the person/s that will be installing any product sold by SegenSolar, follow industry best practices and comply with the relevant SANS and DOL codes.  

For systems containing high voltage batteries or inverters requiring a high voltage DC battery supply greater than 48V, the following is required and should be supplied:   

• Installer must be a 3-phase electrician registered with department of labor (red seal).
• Installer must have product specific training prior to installation.
• Specific manufacturers may require training prior to installation for warranty conditions.