Search results for "myenergi"

The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN. The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system. It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.   Features WiFi Communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both, the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect App Get full control and overview of all operating parameters and session statistics at a glance. Light Ring for fast viewing the device state Fully programmable RGB Light Ring around the charging port to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available: 1. Manual Mode to configure output current Manual mode allows configurable output current between 6-32 A. The charging power can be regulated in different ways: by using the web interface, from a GX device and VRM and via VictronConnect. It allows to manually start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiency Detects when excess power is available and uses only that power to charge the vehicle. 3. Scheduled Mode to charge the EV at certain time intervals A fully programmable scheduler allows charging at different time intervals, for example at certain times during the night when grid energy is cheaper. Integration with GX devices and VRM Control and monitor the EV Charging Station NS from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.

Read more less

Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.   Phoenix Smart (1+1): two outputs to charge 2 battery banks The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.   Automatic voltage compensation The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.   Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.   The right amount of charge: variable absorption time When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.   Preventing damage due to excessive gassing: the BatterySafe mode If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.   Less maintenance and aging when the battery is not in use: the Storage Mode The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.   Also charges Li-ion (LiFePO4) batteries Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.   Fully programmable charge algorithm The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications).   Remote on-off The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details.   VE.Direct interface For a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website.   Programmable relay Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.

Read more less

Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.   Phoenix Smart (1+1): two outputs to charge 2 battery banks The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.   Phoenix Smart (3): three full current outputs to charge 3 battery banks Each output can supply the full rated output current. But the total of the 3 outputs combined can never exceed the current rating of the charger.   Automatic voltage compensation The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.   Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.   The right amount of charge: variable absorption time When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.   Preventing damage due to excessive gassing: the BatterySafe mode If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached (see the charge curve between 14,4 V and 15,0 V in fig. 2).   Less maintenance and aging when the battery is not in use: the Storage Mode The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.   Also charges Li-ion (LiFePO₄) batteries Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.   Fully programmable charge algorithm The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications).   Remote on-off The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details.   VE.Direct interface For a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website.   Programmable relay Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events. Brand Victron Energy Manufacturer Part Number PSC242551085 GTIN 8719076041641 Voltage 24V Charger Current House Battery 25A Low Current Mode 12,5A Efficiency 94% Outputs 2 Outputs (1+1) IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H180 x W249 x D100mm Weight 3.5Kg Warranty 5 Years

Read more less

The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct. The Cyrix will disengage immediately: when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or when battery voltage drops below 13,2 V Start assist function: a short positive pulse will close the relay during 30 seconds. A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature. Brand Victron Energy Manufacturer Part Number CYR010230412 Voltage 12/24 Continuous current & Breaking capacity at 12V or 24V 230A Current Consumption When Open 4 mA Control Cable Included (Length 1 m) Yes LED Status Indication Yes Protection Category IP54 Dimensions H65 x W100 x D50mm Weight (kg) 0.27 Warranty 5 Years

Read more less

Banner, The Power Company have been producing top quality since 1937. Coming out of Austria and distributing predominantly across Europe and Asia. But like all the big battery companies they ship to worldwide distributors. Banner Batteries manufacture their products for many sectors, such as automotive, commercial, leisure, industrial, telecoms, power infrastructure and many more.  Banner Energy Bull Leisure batteries are for hobbies and leisure. The robust Energy Bull’s characteristics make it an ideal power pack for camping, caravans, motorhomes, boats and many more applications, which extend to signal systems and electrical motor movers. In tandem with bag separators and a special mass composition, the robust internal mesh structure of the battery ensures extreme cyclical resistance. Energy Bull Leisure Benefits: • Ideal battery for DUAL applications - Starting and power supply • Easy to load thanks to carbon additives in the plate material • Vibration resistant thanks to bottom bonding of the plates • Higher cycle stability than a starter battery • Optimised capacity - ideal for cyclic loads • Solid cold start values - suitable for most starter applications Maintenance free with option for water topping up 2 Year Warranty Terminals Brand Banner Batteries Voltage 12 Volts Technology Wet Capacity (C20) 130 Ah Length 514 mm Width 189 mm Height inc. terms 220 mm Weight 37 Kg NCC Class B Guarantee 2 Years Barcode (EAN) 9005753010468

Read more less

For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.   Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.  For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Input fuse (not replaceable) Brand Victron Energy Manufacturer Part Number ORI121222120 GTIN 8719076046066 Input Voltage Range 8-17V Under voltage shut down 7V Under Voltage Restart 7.5V Nominal Output Voltage 12.2V Output Voltage Adjust Range 10-15V Cont. output current at nominal output voltage and 40°C 18A Short Circuit Output Current 40A Cont. Output Power at 25°C 280W Cont. output power at 40°C 220W Efficiency 87% DC Connection Screw Terminals IP Rating IP43 Dimensions H130 x W186 x D70mm Weight 1.3Kg Warranty 5 Years

Read more less

These Units Cost in Excess of £50K each 3 Years Ago. CLICK HERE FOR SPEC SHEET Manufactured 2022  Charge from Mains, Generator or Solar- The system will automatically start Generator when batteries get low. Controlled by Victron Inverter / Chargers Single and three Phase outputs. Ideal for off-grid properties / Site offices etc. Can be charged by Solar Panels as well. Output Max is 45Kw Storage is 90Kwh Victron Inverter Technology  • 400/230V 50Hz 3Ø 45kVA • GSM Remote monitoring • Deep cycle maintenance free batteries • 90kWh stored energy • Full system DC isolator with pre-charge • 100A pass-through capacity • Advanced EMS with touch screen control • V50 Power™ for enhanced DC bus stability Batteries will be replaced for New Lithium Technology with 10 Year Warranty

Read more less

Brand Victron Energy Manufacturer Part Number REC010001110 Dimensions L120 x W65 x D4mm Weight (kg) 0.1 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number SCC010020020 GTIN 8719076025351 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 20A Maximum Solar Voltage 28V / 55V Grounding Common positive IP Rating IP20 Dimensions H70 x W133 x D33.5mm Weight 0.15Kg Warranty 5 Years

Read more less

The miniBMS has two outputs, similar to the VE.Bus BMS.  Brand Victron Energy Manufacturer Part Number BMS400100000 Input Voltage Range 8-70VDC Protection Category IP20 Dimensions H106 x W42 x D23mm Weight (kg) 0.1 Warranty 5 Years

Read more less

Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/ 200– recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx smart BMS – recommended for use in large systems.  Features of the 160Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications.   EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.   Size and weightSaves up to 70% in spaceSaves up to 70% in weight   Expensive?LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.   BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance.   The 160Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware   Brand Victron Energy Manufacturer Part Number BAT512118610 gtin 8719076060260 Battery Capacity (C20) 180Ah Terminal Type M10 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H237 x W321 x D152mm Weight 20.5Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle WooCategory1 Batteries By Application WooCategory2 Batteries By Application Leisure & Marine WooCategory3 Leisure & Marine WooCategory4 Batteries By Application Leisure & Marine Victron Energy WooCategory5 Batteries By Application Horsebox WooCategory13 Batteries WooCategory7 Victron Energy WooCategory18 Brands Victron Energy Batteries WooCategory17 Victron Energy WooCategory16 Brands Victron Energy WooCategory6 Batteries By Application Horsebox Hankook WooCategory14 Product Type Batteries Leisure WooCategory15 Brands WooCategory12 Product Type Batteries WooCategory11 Product Type WooCategory10 Lithium Smart WooCategory9 Lithium Smart Batteries WooCategory8 Victron Energy Batteries Voltage (V) 12.8V

Read more less

The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: With help of a computer and software With the dedicated BlueSolar Pro Remote Panel (see features below). Features Lighting control function, fully programmable. Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional external temperature sensor. – Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options See Remote Panel manual for details CLICK HERE FOR SPEC SHEET   Brand Victron Energy Manufacturer Part Number SCC010010010 GTIN 8719076025283 Battery Voltage 12/24V with automatic system voltage detection Rated Charge Current 10A Maximum Solar Voltage 28V / 55V Load Output Manual control + low voltage disconnect + timer Grounding Common positive IP Rating IP30 Dimensions H138 x W70 x D37mm Weight 0.13Kg Warranty 5 Years

Read more less

Features   Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.   High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.   Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.   Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.   Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.   NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.   Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.   Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. Brand Victron Energy Manufacturer Part Number BPC123048022 GTIN 8719076052425 Voltage 12 Charger Amps 30A Outputs 3 Efficiency 93% Plug Type UK IP Rating IP22 Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

Read more less

Part No: GIV-SDM630CT Storage Systems - Storage Energy Meter GEM630 Meter - Modbus V2 Backlit three-line LCD display Three-phase monitoring Modbus output CT operated (programmable ratio) DIN-rail mounting Supplier Part No: SDM630CT Weight: 0.93 kg

Read more less