Products

Multifunctional, with intelligent power management. The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus ha several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on the models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units. for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54kVA three phase inverter and 1260A charger can be built. Split phase options Two units can be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30kW / 36kVA of split phase power. Alterntively, a split phase AC can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240V / 60Hz. PowerControl – Dealing with limited generator, shore side or generator power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20A per 3kVA MultiPlus at 120VAC). With the MultiPlus Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficent shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advacned ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptvie charge process is described in more detailes on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go.If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed!Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick COnfigure and VE.Bus System Configurator) is available to configure several new, advanced features. Manufacturer: Victron EnergyPart Number: PMP123021102Weight: 19kgLength: 218mmWidth: 258mmHeight: 362mmInput Voltage: 9.5 – 17 VOutput Voltage: 120VACContinuous Output Power: 2400W at 25°CPeak Output Power: 6000WCharger Output Current: 120ATransfer Switch: 120AFrequency: 60HzOperating Temperature Range: -40 to +65°C (fan assisted cooling)Output Wave Form: Pure Sine WaveWarranty: 5 Years

Read more less

Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as computers and low power electric tools. To transfer the load to another AC source: the automatic transfer switch For our lower power models we recommend the use of our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. LED diagnosis Please see manual for a description. Remote on/off switch Connector for remote on/off switch available on all models. click here for spec sheet Weight 7.4 kg Dimensions 362 × 232 × 117 mm Brand Victron Energy Input Voltage 24V Output Voltage 110V Wattage (W) 1000W Region North America Inverter Type Pure Sine Wave Warranty 5 Years

Read more less

Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as computers and low power electric tools. To transfer the load to another AC source: the automatic transfer switch For our lower power models we recommend the use of our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. LED diagnosis Please see manual for a description. Remote on/off switch Connector for remote on/off switch available on all models. DIP switch for 50/60Hz selection (48/350 model only) Available with different output sockets click here for spec sheet Weight 6.5 kg Dimensions 305 × 194 × 104 mm Brand Victron Energy Input Voltage 48V Output Voltage 110V Wattage (W) 700W Region North America Inverter Type Pure Sine Wave Warranty 5 Years

Read more less

Models: 3000VA, 5000VA, 8000VA, 10000VA, 15000VA Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output. Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control Monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for hire vehicles and more… Two AC inputs with integrated transfer switch The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source. Two AC Outputs The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel operation Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output power and 840 Amps charging capacity. Split phase options Two units can be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30kW / 36kVA of split phase power.Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240V / 60Hz. Three phase capability Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded. PowerAssist – Boosting shore or generator power This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices.Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.   Weight 34 kg Dimensions 280 × 350 × 470 mm Brand Victron Energy Input Voltage 12V Output Voltage 110V Current (Amps) 200A Wattage (W) 4000W Region North America Inverter Type Pure Sine Wave Warranty 5 Years

Read more less

Features of the Quattro 48/10000-140-100 Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.   Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.   Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.   Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more…   Want to have perfect control over your system from wherever you are whilst using your Quattro 48/10000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.   Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50   The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates.

Read more less

Features of the Quattro 48/5000-70-100 Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.   Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.   Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.   Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more…   Want to have perfect control over your system from wherever you are whilst using your Quattro 48/5000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.   Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50   The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates.

Read more less

Features of the Quattro 48/5000-70-100 Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.   Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.   Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.   Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more…   Want to have perfect control over your system from wherever you are whilst using your Quattro 48/5000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.   Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50   The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates.

Read more less

Features of the Quattro 48/8000-110-100 Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.   Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.   Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.   Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more…   Want to have perfect control over your system from wherever you are whilst using your Quattro 48/8000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.   Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50   The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates.

Read more less

Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Flexible charge algorithm Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.  CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC125110441 GTIN 8719076050926 Battery Voltage 12/24/48V Auto Select (36V: manual) Rated Charge Current 100A Nominal PV Power, 12V 1450W Nominal PV Power, 24V 2900W Max. PV Short Circuit Current 70A Maximum PV Open Circuit Voltage 250V absolute maximum coldest conditions | 245V start-up and operating maximum Efficiency 99% Charge Algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Data Communication Port VE.Can IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years

Read more less

This Victron Product benefits from a 5 year warranty Functionally, this device bears resemblance to the EV Charging Station. However, it features a modern design, available in a choice of three colours, and it is stripped of the built-in LCD screen. VictronConnect handles the initial setup, configuration, and monitoring through Bluetooth, the integrated web interface via WiFi Access Point, or a WiFi LAN. This charger can be seamlessly integrated into the Victron Energy GX Device and VRM systems, permitting remote control of the station. Moreover, with solar energy incorporated into the Victron ecosystem, excess solar energy can be utilized to power your vehicle. Manual and scheduled modes allow for further flexibility to satisfy the EV’s requirements, depending on the system. The charging port is surrounded by an entirely programmable RGB light ring that flashes varying light effects based on the current state of the charger (connected, charging, fully charged, etc.), offering a quick way to determine the device’s status.

Read more less

Brand Victron Energy Manufacturer Part Number GSM100100400 GTIN 8719076052937 Voltage Range 8-70VDC Antenna Connector Type SMA Female SIM Card Regular Mini SIM Dimensions L106 × W42.5 × H22mm Warranty 5 Years

Read more less

Highlights Multiple improvements including added read-out of cell voltages and temperatures; Maximum single bank size increased to 385kWh; Modules available in 12, 24 and 48V; Protection class IP65; Bracket mounting and strap mounting. 12,8V – 25,6V – 51,2V Lithium NG Batteries Lynx Smart BMS NG Tailored for those seeking advanced and reliable energy storage, the Lithium NG series marks a pivotal advancement in our product lineup, ready to meet the demands of tomorrow. Model LiFePO4 25.6V/300Ah NG Nominal Voltage 25.6V Capacity 300Ah Energy Capacity 7.68kWh Protection Rating IP65 Max Bank Size 385kWh Warranty 5 Years

Read more less

  Built in 1000 Amp Contactor acts as a fail-safe emergency shut off  Built in Battery Monitor  Pre-Alarm signal give a warning before shutoff Built in Bluetooth Local and remote monitoring when used with a Cerbo GX  For use with Victron Smart Lithium Batteries only  Comes with a 5 year warranty

Read more less

IMPORTANT NOTICE: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.   Uninterrupted AC power with UPS functionality, ensuring smooth operation during power failures Rapid activation (less than 20 milliseconds) to maintain power supply for sensitive electronics Remote monitoring and control via GX devices, accessible through the free VRM app and portal Parallel operation capability allows up to six units to be connected for increased power output Three-phase capability with configurations for three units to enhance performance PowerAssist technology boosts shore or generator power by supplementing with battery power when needed User-friendly connectivity options including Bluetooth for easy access and control Compact design for effortless installation in various environments Power Output 1200VA (Continuous) Input Voltage 24V DC Output Voltage 230V AC Transfer Switch (A) 25A UPS Functionality Yes Activation Time <20 milliseconds Parallel Operation Capability Yes, up to 6 units Three-Phase Capability Yes, with up to 3 units PowerAssist Feature Yes Dimensions Compact design Weight Lightweight for easy installation

Read more less

Features of the - Victron MultiPlus-II 12V/5000VA Inverter/Charger 220-50A - 230V A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist - Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel (not for the 8k, 10k and 15k models) and three phase operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.  

Read more less

Introducing the Victron MultiPlus-II 24/5000/120-95, a top-tier energy solution for those seeking reliable power in compact environments. This innovative device intelligently merges the capabilities of a 5000VA 24V pure sine wave inverter, a sophisticated 120A adaptive battery charger, and a high-speed 50A AC transfer switch. With this combination, the MultiPlus-II ensures that your devices receive clean, efficient power, making it perfect for operating household appliances like TVs, laptops, and lighting. The unit can generate up to 4000W of continuous power and manage peak demands of up to 9000W, making it exceptionally versatile for various applications. Its adaptive charging technology offers four distinct stages of charging (bulk, absorption, float, storage), ensuring safe and efficient battery management. In the event of grid failure, the MultiPlus-II’s high-speed transfer switch activates in less than 20 milliseconds, providing an uninterrupted power supply for sensitive electronics. Additionally, the MultiPlus-II includes advanced features such as PowerControl, PowerAssist, and a programmable relay, enhancing its functionality and customisation options. 5000VA pure sine wave inverter: Delivers reliable AC power for a variety of appliances. Continuous power output of 4000W with peak handling of 9000W. Adaptive 120A battery charger with 4-stage charging for optimal battery health. Uninterruptible power supply (UPS) function with a 50A AC transfer switch for seamless operation during outages. PowerControl and PowerAssist features optimise self-consumption and manage power sources effectively. Programmable relay for various applications, including generator start/stop signals. Parallel and 3-phase operation capability for increased power output. Comprehensive safety protections against overloads, short circuits, and more. Remote monitoring and control via the free VRM app or portal.   Model MultiPlus-II 24/5000/120-95 Input Voltage 24V DC Output Voltage 120V AC Continuous Output Power 4000W Peak Power Output 9000W Charger Output Current 120A Transfer Switch 50A    

Read more less

Stay in charge with configurable input and output currents and rest assured that your Orion XS will run at full capacity up to 40°C. The 98.5% efficient aluminium circuit board technology means less heat, without the need for fans. As an integral part of your Victron system, the Orion XS offers full (remote) monitoring and control capabilities, giving you complete command of your device and system. Fully configurable Engine shutdown detection Intelligent charge algorithms Efficient cooling Works with VictronConnect Remote monitoring optional

Read more less

Features of the - Victron Phoenix Inverter Compact 12V/1600VA VE.Bus SinusMax - Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. New applications of high power inverters The possibilities of paralleled high power inverters are truly amazing.

Read more less

Key Features Product Code: SHU065130050 Monitor battery voltage, current, state of charge, and time remaining Track historical data: deepest discharge, average discharge, charge cycles Waterproof and robust IP65-rated enclosure suitable for all environments Connect via Bluetooth with the VictronConnect app for easy monitoring on your smartphone or tablet Optional VE.Direct to USB interface for USB connectivity Compatible with GX devices for both local and remote monitoring via VRM portal Auxiliary input for second battery or midpoint voltage monitoring Seamless integration with Victron solar chargers and select AC chargers via VE.Smart networking No visual or audible alarm; notifications via VictronConnect app or GX device Versions Available: 300 A, 500 A, 1000 A, 2000 A Why Choose SmartShunt 300A IP65? Batteries play a critical role in storing energy, but without the right tools, it’s impossible to gauge the health and charge levels of your batteries just by looking. The SmartShunt 300A IP65 provides comprehensive monitoring capabilities, ensuring you’re never in the dark about your battery’s status. This advanced monitor helps you avoid common battery issues such as over-charging, deep discharges, and excessive temperature effects, thereby safeguarding your investment and extending battery life. The SmartShunt 300A IP65 is a superior alternative to traditional BMV battery monitors, offering a streamlined setup without the need for extensive wiring or additional hardware. Your mobile device acts as the display, offering a clean and user-friendly interface for accessing all battery parameters. Installation and Use Setting up the SmartShunt 300A IP65 is straightforward. Connect it directly to your battery with a VE.Direct cable, and pair it with the VictronConnect app via Bluetooth. For expanded functionality, integrate it with a GX device to monitor your system locally or through the VRM portal remotely.  

Read more less

Key Features of the Victron 130W Solar Panel: 130W Power Output: Ideal for charging 12V or 24V battery systems, this panel provides consistent, efficient power output to meet your energy needs. High Efficiency: Built with high-quality monocrystalline solar cells, the Victron 130W Solar Panel ensures superior energy conversion, even in low-light conditions. Durable Construction: Engineered to withstand harsh environments, this panel features a rugged aluminum frame, tempered glass, and weather-resistant components for long-lasting durability and reliable performance. Compact and Lightweight: Its slim design makes it easy to install and perfect for spaces with limited installation options. The lightweight construction ensures easy transport and mounting. Versatile Compatibility: Compatible with Victron’s entire range of charge controllers and inverters, offering a seamless integration for off-grid solar setups. Corrosion-Resistant: With its corrosion-resistant frame and materials, this panel is built to endure the elements, even in coastal or humid environments. Applications of the 130W Victron Solar Panel: RVs, Boats, and Off-Grid Living Backup Power Systems/li> Remote Outdoor Activities and Campsites Small Solar Power Systems CCTV Towers With the Victron 130W Solar Panel, you can rely on a durable, efficient, and eco-friendly power solution that meets your energy demands, while helping you reduce your carbon footprint. Invest in a sustainable energy source today, and enjoy reliable power for years to come. Brand: Victron Energy Model: SPM041301200 Panel Quantity: 1 x 130W Solar Array Size: 130W Rated Power: 130W Voltage: 22.83 Type: Rigid Cell Type: Monocrystalline Connector: MC4 Dimensions: 1200 x 668 x 30mm Maximum System Voltage: 1000V Number of Cells in Series: 36

Read more less

Part No: VIR-CSI1000 Inverters - Main Units Rating: 1,000W Phases: 1

Read more less

Part No: VIR-CSI1500 Inverters - Main Units Rating: 1,500W Phases: 1

Read more less

Part No: VIR-CSI2000 Inverters - Main Units Rating: 2,000W Phases: 1

Read more less

Part No: VIR-CSI2500 Inverters - Main Units Rating: 2,500W Phases: 1  

Read more less

Part No: VIR-CSI3000 Inverters - Main Units Rating: 3,000W Phases: 1

Read more less

Part No: VIR-CSI3600 Inverters - Main Units Rating: 3,600W Phases: 1

Read more less

Part No: VIR-PV16-335-G1-V3 Panels - Monocrystallines Rating: 335W Efficiency: 19.9% Width: 1,000mm Height: 1,686mm Viridian  335W - Clearline Fusion G1 Half Cut Cells G1  Roof Integrated solar PV. Version 3 G1 modules use mono-crystalline PERC G1 cells at 158.75mm which have been cut in half.  The "Half Cell" modules combine two circuits in parallel to to deliver a higher output rating at greater reliability, alongside a host of other technical benefits; Reduced resistance losses at cell connections for higher panel efficiency Each half is unaffected by shading on the other Lower heating effect from spot shading Greater resistance to mechanical stress in bending Available as a 335/340Wp panel (product code VIR-PV16-335/ VIR-PV16-340). Please note: This module is identical to the original version except for a slight difference in the colouration of the cells. This is not a striking difference but would be noticeable if mixed on the same roof.   Note: G1 modules require G1 flashing and standard flashing will not work

Read more less

Part No: VIR-CSI5000 Inverters - Main Units Rating: 5,000W Phases: 1  

Read more less

Part No: VIR-CSI6000 Inverters - Main Units Rating: 6,000W Phases: 1

Read more less

Part No: VIR-F16-LCLB-G1 Mounting - In Roof Supplier Part No: F16-LCLB-G1 Weight: 21 kg Length: 1.8 m

Read more less

Part No: VIR-F16-LCLB-S-G1 Mounting - In Roof Viridian Clearline Fusion G1 landscape corner conversion kit, left bottom corner (left panel above). Used for roof integrated PV module mounting systems.   Supplier Part No:F16-LCLB-S-G1 Weight:21 kg Length:1.8 m

Read more less

Part No: VIR-F16-LCLT-G1 Mounting - In Roof Supplier Part No: F16-LCLT-G1 Weight: 5 kg Length: 1.8 m

Read more less

Part No: VIR-F16-LCRB-G1 Mounting - In Roof Used for roof integrated PV module mounting systems.

Read more less

Part No: VIR-F16-LCRT-G1 Mounting - In Roof Supplier Part No:F16-LCRT-G1 Weight:5 kg Length:1.8 m

Read more less

Part No: VIR-F16-LC-G1 Mounting - In Roof Supplier Part No:F16-LC-G1 Weight:12 kg Length:1.8 m

Read more less

Part No: VIR-F16-LJ-G1 Mounting - In Roof Supplier Part No:F16-LJ-G1 Weight:2.1 kg Length:1.8 m

Read more less

Part No: VIR-F16-LL-G1 Mounting - In Roof Supplier Part No:F16-LL-G1 Weight:12 kg Length:1.8 m

Read more less

Part No: VIR-F16-LR-G1 Mounting - In Roof Supplier Part No:F16-LR-G1 Weight:12 kg Length:1.8 m

Read more less

Part No: VIR-F16-LY-G1 Mounting - In Roof Supplier Part No:F16-LY-G1 Weight:2.1 kg Length:1.8 m

Read more less

Part No: VIR-VAL16-G1 Mounting - In Roof  Supplier Part No:VAL16-G1 Weight:21 kg Length:1.8 m

Read more less

Part No: VIR-F16-CLB-G1 Mounting - In Roof Supplier Part No: F16-CLB-G1 Weight: 21 kg Length: 1.8 m

Read more less

Part No: VIR-F16-CLB-S-G1 Mounting - In Roof  Supplier Part No: F16-CLB-S-G1 Weight:21 kg Length:1.8 m

Read more less

Part No: VIR-F16-CLT-G1 Mounting - In Roof Viridian Clearline Fusion G1 portrait corner conversion kit, left top corner. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-CLT-G1 Weight:5 kg Length:1.8 m

Read more less

Part No: VIR-F16-CRB-G1 Mounting - In Roof Supplier Part No:F16-CRB-G1 Weight:21 kg Length:1.8 m

Read more less

Part No: VIR-F16-CRT-G1 Mounting - In Roof Viridian Clearline Fusion G1 portrait corner conversion kit, right top corner. Used for roof integrated PV module mounting systems.   Supplier Part No:F16-CRT-G1 Weight:5 kg Length:1.8 m

Read more less