INVERTERS FOR SOLAR / BATTERY STORAGE

The Phoenix 12/1200 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. This unit has the UK plug. Features of the Phoenix Inverter 12/1200 VE.Direct VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 12/1200 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the Phoenix Inverter 12/1200 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Monitor, operate & control your system VictronConnect lets you get live status information and configure your Phoenix Inverter 12/1200 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle. The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs. Not sure what size inverter you need, why not take a look at our guide to sizing an inverter. Brand Victron Energy Manufacturer Part Number PIN122121400 gtin 8.72E+12 Voltage 12V

Read more less

The Phoenix 12/500 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. This unit has the IEC plug. Features of the Phoenix Inverter 12/500 VE.Direct VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 12/500 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the Phoenix Inverter 12/500 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Monitor, operate & control your system VictronConnect lets you get live status information and configure your Phoenix Inverter 12/500 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle. The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs. Not sure what size inverter you need, why not take a look at our guide to sizing an inverter. Brand Victron Energy Manufacturer Part Number PIN121501100 gtin 8.72E+12 Voltage 12V

Read more less

The Phoenix 12/375 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. This unit has the IEC plug but comes with a UK plug adapter Features of the Phoenix Inverter 12/375 VE.Direct VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 12/375 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the Phoenix Inverter 12/375 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Monitor, operate & control your system VictronConnect lets you get live status information and configure your Phoenix Inverter 12/375 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle. The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs. Not sure what size inverter you need, why not take a look at our guide to sizing an inverter Brand Victron Energy Manufacturer Part Number PIN121371100 Voltage 12V Cont. Output Power at 25°C 375VA

Read more less

The Victron Phoenix Inverter Compact 24/1600 230V VE.Bus is built for professional duty, offering a true sine wave output that ensures optimized performance and efficiency. This advanced inverter uses SinusMax technology, which provides exceptional start-up power, making it suitable for applications like refrigeration compressors, electric motors, and other high-power equipment. Designed to be both compact and lightweight, the Phoenix Inverter delivers reliable power for a variety of applications. It is capable of delivering higher power outputs by operating in parallel or 3-phase configurations, allowing up to six units to be linked together to deliver a total of 24kW / 30kVA of output power. The inverter features an RS-485 port for easy connection to a computer via the MK3-USB VE.Bus interface, enabling you to customise settings like output voltage, frequency, and over/under voltage thresholds. The VEConfigure software, available for free download, lets you adjust parameters for optimal performance. Whether you’re powering sensitive equipment or large appliances, the Victron Phoenix Inverter Compact ensures smooth and uninterrupted operation, even in demanding environments. SinusMax technology for high efficiency and excellent start-up power True sine wave output, ideal for sensitive electronics and motor-driven devices Compact and lightweight design for versatile use in a variety of applications Parallel and 3-phase operation capability to increase output power Capable of connecting up to 6 units in parallel, achieving 24kW / 30kVA of output power RS-485 port for easy computer connection and configuration via the MK3-USB VE.Bus interface VEConfigure software for customisable settings such as output voltage and frequency Suitable for professional use, off-grid installations, and demanding loads Specification Details Model Phoenix Inverter Compact 24/1600 230V VE.Bus Input Voltage 24V DC Output Power 1600W (1.6kW) Output Voltage 230V AC (True Sine Wave) Efficiency Optimized for high efficiency and performance Start-Up Power Very high start-up power for difficult loads Parallel Operation Capability Yes, up to 6 units in parallel to achieve up to 24kW / 30kVA output Three-Phase Operation Supported for higher power configurations RS-485 Port Yes, for connection to computer and external systems Computer Interface MK3-USB VE.Bus interface required for PC connection Customizable Settings Output voltage, frequency, over/under voltage settings, relay programming Cooling Fan-cooled Warranty 5 years

Read more less

Part No: SOL-PRIMEPOWER-109KWH-50KW-NV-C5-M Storage Systems - Hybrid Inverter SolisStorage PrimePower 109kWh/50kW SolisStorage PrimePower -109kWh Standard: Aerosol, explosion relief valve, fire water inlet Optional (Pro-Version here): Combustible gas detector, explosion relief plate, audible and visual alarm SolisCloud: Intelligent remote control, AI optimisation and instant troubleshooting – all in one platform <10 ms switchover from grid-connected to off-grid for uninterrupted power supply or <20 ms with multiple inverters connected in parallel Flexible system expansion, up to 500 kW/6.5 MWh Design & Build Dimensions: 1270 × 2070 × 1357 mm (with inverter) Weight: 1393 kg total-1320 kg (Cabinet) + 73 kg (Inverter) Noise Level: 70 dB at  1 m Ingress Protection: IP55 (cabinet), IP66 (inverter) Anti-Corrosion: C5 Environmental Protection S6-EH3P50K-H (SOL-S6-EH3P50K-H) Attention: an external ATS is needed for connecting more than 6 units in parallel, an ATS from another manufacturer can be used with these Solis units. (Solis external ATS is under development)

Read more less

Part No: SOL-S6-EH3P40K-H Storage Systems - Hybrid Inverter Solis Three Phase High Voltage Energy Storage Inverters Models Features: Allowable PV of up to 80kW, on the 180-1000V MPPT. 4-MPPTs, rated at 40A each, with 2-string inputs each allowing for 8 strings of high power/current PV modules. Supports Grid and Generator AC inputs. Parallel up to 6 x inverters for up to 300kW of back-up load. Battery Charge and Discharge current of up to 140A. UPS transfer time of less than 10ms. 160% surge power for 2s to accommodate inductive loads. Integrated AFCI (DC arc-fault circuit protection) – mitigating fire risks. LCD display and remote firmware upgrades with included S4 Wi-Fi/LAN Stick and Solis Cloud support/monitoring. Solis reliability with 5-year warranty. (extendable to 10/15/20-years) Current transformer ESCT-T50-300A/5A included in product packaging

Read more less

Part No: SOL-S6-EH3P10K-NV-YD-L-UK Storage Systems - Hybrid Inverter Solis Three phase LV Energy Storage Inverter Features: Generator-compatible to extend backup duration during grid power outage Multiple inverters can operate together to form a microgrid Supports dual backup ports for intelligent control of critical and non-critical loads 10 seconds of 200% overload capability Supports a maximum input current of 20A, making it ideal for all high-power PV modules of any brand Ensures excellent power supply stability, keeping the load unaffected by a weak grid or generator supply fluctuations The battery's DC side can handle a maximum charge/discharge current of up to 290A, allowing it to store more surplus energy generated by PV systems Supports Unbalanced and Half-Wave Loads on both the Grid and Backup Port

Read more less

Part No: SOL-S6-EH3P-8.0K-H-UK Storage Systems - Hybrid Inverter Solis S6 8kW 3PH Hybrid Inverter 4 MPPTs, suitable for residential rooftop installations with multiple array orientations Supports Unbalanced and Half-Wave Loads on the Grid Port and on the Backup Port Compatible with multiple brands of battery models giving customers multiple battery options Supports up to 10 units in parallel on Grid and Backup. Suitable for small to medium level commercial energy storage systems Supports pure off grid applications with generator communication support  Multiple working modes to meet different use case scenarios  Controllable and Upgadeable via the SolisCloud App to avoide site visits Up to 16A of MPPT current input to support 182mm/210mm solar panels Supports 1.6 DC:AC ratio to connect more PV capacity to the energy storage system Up to 50A/10kW max charge/discharge rating with industry highest level 10kW of backup loads support capability  UPS level switching time (<10ms) supporting critical loads all the time High PV charge efficiency to prevent excess PV loss Safety protection with integrated AFCI function, which actively detects arc faults in the PV Array Natural convection design without external fans Please note: The inverter is supplied including the S2-WL-ST data logger stick (WiFi & LAN) and a 3PH meter from Eastron

Read more less

Part No: SOL-S6-EH3P-6.0K-H-UK Storage Systems - Hybrid Inverter   Solis S6 6kW 3PH Hybrid Inverter 3 MPPTs, suitable for residential rooftop installations with multiple array orientations Supports Unbalanced and Half-Wave Loads on the Grid Port and on the Backup Port Compatible with multiple brands of battery models giving customers multiple battery options Supports up to 10 units in parallel on Grid and Backup. Suitable for small to medium level commercial energy storage systems Supports pure off grid applications with generator communication support  Multiple working modes to meet different use case scenarios  Controllable and Upgadeable via the SolisCloud App to avoide site visits Up to 16A of MPPT current input to support 182mm/210mm solar panels Supports 1.6 DC:AC ratio to connect more PV capacity to the energy storage system Up to 50A/10kW max charge/discharge rating with industry highest level 10kW of backup loads support capability  UPS level switching time (<10ms) supporting critical loads all the time High PV charge efficiency to prevent excess PV loss Safety protection with integrated AFCI function, which actively detects arc faults in the PV Array Natural convection design without external fans Please note: The inverter is supplied including the S2-WL-ST data logger stick (WiFi & LAN) and a 3PH meter from Eastron

Read more less

Part No: SOL-S6-EH3P50K-DY-STACK100-51KWH Storage Systems - Commercial Storage  

Read more less

Part No: SOL-S6-EH3P50K-DY-STACK100-133KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages

Read more less

Part No: SOL-S6-EH3P40K-DY-STACK100-133KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages

Read more less

Part No: SOL-S6-EH3P30K-DY-STACK100-30KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages

Read more less

Part No: SOL-S6-EH3P30K-DY-STACK100-133KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages

Read more less

Part No: SOL-S6-EH3P20K-DY-STACK100-66KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages

Read more less

Part No: SOL-S6-EH3P20K-DY-STACK100-41KWH Storage Systems - Commercial Storage

Read more less

Part No: SOL-S6-EH3P15K-DY-STACK100-66KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages

Read more less

Part No: SOL-S6-EH3P15K-DY-STACK100-30KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages

Read more less

Part No: SOL-S6-EH3P12K-DY-STACK100-66KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages 

Read more less

Part No: SOL-S6-EH3P12K-DY-STACK100-25KWH Storage Systems - Commercial Storage Solis S6 EH3PK and Dyness Stack 100 storage packages 

Read more less

Max. efficiency 97.8% IP66 > 150% DC/AC ratio String current up to 16A Supports RS485, WiFi, GPRS Supports export power control Intelligent redundant fan-cooling Wide voltage range and low startup voltage AFCI protection, proactively reduces fire risk Supports aluminium wire access to reduce cost Intelligent string monitoring, Smart I-V curve scan Globally recognised branded componentry for longer life Supports high power modules for lower installation costs 3 MPPT design, supports multiple orientation system design Night time PID recovery function, increases overall system yield (optional) Scan to register on SolisCloud, supports remote upgrade and control Supports GPRS/WiFi communication with less wiring and reduced installation costs

Read more less

Part No: SOL-METER-1PH-CT1 Display - Power Management ACR10R16DTE Single phase meter for Export Limitation with Solis 1-phase inverters. Comes with 120A CT. Meter allows for full 24 hour Consumption Monitoring. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems.  

Read more less

The Solis PrimePower 109kWh + C5 Combo - Expandable Master- Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection and S6-EH3P50K-H combines a high-capacity battery cabinet with a 50kW three-phase hybrid inverter into a single, pre-engineered commercial storage system. With 109.7kWh total energy and around 98.7kWh usable, this all-in-one package is ideal for C&I sites looking to cut peak demand, maximise PV self-consumption and improve resilience. As an integrated battery storage and inverter platform, it allows installers to deliver bankable, repeatable energy storage projects without having to design every element from scratch. PrimePower Integration and Operation At the heart of the system is the S6-EH3P50K-H hybrid inverter matched to the PrimePower battery cabinet. Together they provide: 50kW three-phase AC power for charge, discharge and backup Up to 96kW PV input with four MPPTs for flexible string design Fast transfer from on-grid to off-grid in under 10ms to protect critical loads The Solis PrimePower 109kWh + C5 Combo - Expandable Master- Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection and S6-EH3P50K-H is engineered as an “Expandable Master” unit, forming the core building block of larger commercial storage systems up to 500kW / 6.5MWh through parallel cabinets and inverters. High-Performance Battery Technology The PrimePower cabinet uses LFP cells from CATL (306Ah) arranged in a 1P112S configuration with seven 15.67kWh packs. This delivers robust cycle life (up to 10,000 cycles under manufacturer test conditions) and a 0.5C charge/discharge rate suitable for most C&I profiles. For your customers, that means a long-lived storage system with predictable performance and strong round-trip efficiency. For installers, it provides a standardised battery storage platform from a leading global manufacturer with clear ratings and certifications. Durability, Safety and C5 Protection Designed for demanding environments, the cabinet offers: C4/C5 anti-corrosion options for the battery and C5 for the inverter IP55 cabinet and IP66 inverter ingress protection Industrial-grade air-conditioning for the cabinet and natural cooling at pack level Integrated fire protection with aerosol suppression, explosion relief and fire-water inlet These features make the Solis PrimePower 109kWh + C5 Combo - Expandable Master- Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection and S6-EH3P50K-H a compelling commercial storage choice for coastal, industrial and high-pollution sites where long-term reliability is critical. Installer and Project Benefits For professional installers, this PrimePower combo offers: A single, matched energy storage package with clearly defined interfaces Simplified design, wiring and commissioning across multiple projects Scalable architecture for phased C&I deployments Strong customer value: lower energy costs, improved resilience and better use of on-site solar By adding this PrimePower 109kWh + C5 storage system to your portfolio, you can deliver a premium, manufacturer-engineered commercial storage solution that enhances your service offering and supports long-term customer relationships.

Read more less

The Solis PrimePower 109kWh Battery - Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection is a dedicated commercial storage solution built around premium LFP cells and an outdoor-rated cabinet. With 109.7kWh total capacity and 98.7kWh usable energy, it provides a solid foundation for commercial and industrial battery storage projects focused on peak shaving, backup power and maximising on-site solar consumption. Installed as part of a wider PrimePower system, this battery cabinet allows installers to deliver repeatable, manufacturer-engineered energy storage solutions rather than one-off, bespoke integrations. High-Performance Battery Technology Inside the cabinet, the Solis PrimePower 109kWh Battery - Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection uses CATL 306Ah LFP cells in a 1P112S configuration, arranged as seven 15.67kWh packs. Key performance characteristics include: 109.7kWh rated energy, 98.7kWh usable storage Up to 0.5C max cycle rate for typical C&I load profiles Cell cycle life up to 10,000 cycles under manufacturer test conditions High round-trip efficiency (up to 89% at rated operating condition) For your customers, this means a long-life storage system with predictable performance and strong project economics over the lifetime of the asset. C5 Environmental Protection and Safety The “Standard Version + C5” configuration is engineered for harsh commercial environments where corrosion and exposure are genuine risks. The cabinet offers: C4/C5 anti-corrosion class for the battery enclosure IP55 ingress protection for the cabinet Industrial-grade air-conditioning at system level and natural cooling at pack level Operating temperature range of –25°C to +55°C and up to 4000m altitude Safety is handled through multiple layers of protection, including aerosol fire suppression, explosion relief, fire-water inlet and optional flammable gas detection with audible and visual alarms. Installer-Friendly Commercial Storage Cabinet The Solis PrimePower 109kWh Battery - Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection has been designed with practical installation in mind: Compact cabinet footprint of 950 × 2070 × 1357mm (without inverter) Clear internal layout for DC terminations and communication wiring Integrated protections (anti-islanding, residual current detection, insulation monitoring) at system level For installers, this reduces design time, speeds up commissioning and simplifies repeat deployments across multiple sites. Key Benefits for Commercial Projects By adding this PrimePower storage cabinet to your offering, you can help customers: Reduce peak demand charges and improve load management Increase self-consumption from on-site PV Enhance resilience with robust, long-life battery storage Build scalable energy storage systems using a proven, manufacturer-backed platform   The Solis PrimePower 109kWh Battery - Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection delivers a premium commercial storage solution that supports installers in offering reliable, future-ready projects to their own customers.

Read more less

The Solis S6 50kW 3 Phase Hybrid Inverter with DC - 4 MPPT for HV Batteries (WIFI/LAN) - To Be Used with PrimePower Only is a dedicated high-voltage hybrid storage inverter for commercial and industrial projects. Offering 50kW three-phase output, four MPPT trackers and support for high-voltage battery banks, it forms the power-conversion core of Solis PrimePower energy storage systems.  This PrimePower-only variant is designed for installers who want a robust, repeatable platform for C&I battery storage without the complexity of mixing and matching generic inverters and batteries. Dedicated PrimePower Integration Unlike a standard S6 hybrid inverter, this model is supplied with dedicated PrimePower software and configuration. That means: It is to be used with PrimePower only – not for general hybrid installs. A regular S6-EH3P50K-H cannot be used in PrimePower systems. Firmware, protections and communication are tuned specifically for PrimePower battery cabinets. For installers, that removes ambiguity: when you pair this inverter with the Solis PrimePower 109kWh Battery - Standard Version + C5 - Includes All Standard Model Items, C5 Environmental Protection, you know the control strategy, safety functions and monitoring are engineered as a single energy storage solution – not a custom integration. Performance for Commercial Storage Projects Built on the proven S6 platform, the Solis S6 50kW 3 Phase Hybrid Inverter with DC - 4 MPPT for HV Batteries (WIFI/LAN) - To Be Used with PrimePower Only 50kW three-phase output for C&I loads Up to 96kW PV input with 4 × MPPT for flexible rooftop layouts High-voltage battery interface with 70A + 70A charge/discharge capability across two battery ports Fast backup switching and strong overload capability for critical loads In a complete PrimePower configuration, it partners directly with the Solis PrimePower 109kWh + C5 Combo - Expandable Master- Standard Version + C5 to form a pre-engineered 50kW / 109kWh commercial storage system. Designed Around Installers This PrimePower-specific storage inverter is built to make commercial installs faster and more repeatable: Standardised wiring philosophy across PrimePower projects Clear communication mapping to PrimePower cabinets and BMS Integrated WIFI/LAN for remote monitoring and fleet management Support for parallel operation, allowing multiple units in larger C&I battery storage plants  That means easier design, simpler commissioning and a single, consistent approach across multiple commercial sites. Part of a Complete PrimePower Family For your customers, the Solis S6 50kW 3 Phase Hybrid Inverter with DC - 4 MPPT for HV Batteries (WIFI/LAN) - To Be Used with PrimePower Only is the inverter “engine” behind a fully integrated storage solution: Combine it with the Solis PrimePower 109kWh Battery - Standard Version + C5 for a rugged, C5-rated battery cabinet. Offer the full PrimePower 109kWh + C5 Combo when you need a turnkey 50kW / 109kWh commercial energy storage package.   By using this PrimePower-only hybrid inverter in your C&I projects, you can deliver a tightly integrated, manufacturer-backed storage system that fits seamlessly into the wider PrimePower portfolio and strengthens your own service offering to commercial clients.

Read more less

Part No: FE-H3-8.0-SMART Storage Systems - Hybrid Inverter

Read more less

Part No: SUN-3PH-50K-BATT-40.96 Storage Systems - Storage Package

Read more less

Part No: SUN-3PH-100K-BATT-245.76 Storage Systems - Storage Package  

Read more less

Part No: SUN-HV-20.48-BATTRACK-DOOR Storage Systems - Battery Cabinet

Read more less

Part No: SUN-3PH-50K-BATT-20.48 Storage Systems - Storage Package  

Read more less

Part No: SUN-12.0-3PH Storage Systems - Hybrid Inverter  

Read more less

Part No: SUN-10.0-3PH Storage Systems - Hybrid Inverter

Read more less

Part No: SUN-3PH-50K-BATT-122.88 Storage Systems - Storage Package Sunsynk High Voltage Storage Package 50kW 3PH Hybrid Inverter with 122.88kWh Battery  

Read more less

Part No: SUN-10.0 Storage Systems - Hybrid Inverter SYNK-10K-SG02LP1

Read more less

Part No: SUN-METER-E-3P Storage Systems - Storage Energy Meter

Read more less

Part No: SUN-METER-E-1P Storage Systems - Storage Energy Meter

Read more less

Part No: SUN-HV-BMS Storage Systems - Communication Module Please note that this is a singular part, please use SUN-HV-61.44 or SUN-HV-20.48

Read more less

Manufacturer Code: Outdoor-Box-X1 Order Code: HC-Single-Unit-Cabinet Introduction HANCHU IP65 batteries can be installed externally where necessary. When installed externally it is recommended that they are not exposed to direct sunlight. In addition, there are clear security issues potentially if installing high value batteries outside. The HANCHU outdoor enclosure cabinets allow for flexible installations using the range of available batteries. Capacity 3 x 3.2kWh 1 x 5.12kWh 1 x 9.4kWh

Read more less

Features of the - Victron Energy EasyPlus Compact 12V/1600VA 70-16A - 230V Multi-functional power solution The EasyPlus is a multifunctional energy system consisting of a powerful sine wave inverter, a sophisticated battery charger, a high speed AC transfer switch and AC distribution in a single light weight and compact enclosure. The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures. Optimum comfort and safety The EasyPlus guarantees uninterrupted power supply, whenever and wherever you are. Where shore or generator power is limited, the unique PowerAssist® technology makes it possible to boost the total capacity by adding extra energy from the batteries. Optimum safety is guaranteed with the integrated RCD (Residual Current Device) protecting against earth leakage. Brand Victron Energy Manufacturer Part Number CEP122160000 Charge Voltage 14.4 absorption (V DC) Charger Voltage 13.8 float (V DC) Peak Power (W) 3000 Voltage 12V Weight 11.7Kg

Read more less

The solar charger ensures that the batteries are being charged by energy harvested from your solar panels. The charge algorithm is programmable. The inverter and solar charger parameters can be read out via Bluetooth using the VictronConnect app. In addition to this, the inverter has a VE.Direct Port for connection to a GX device or GlobalLink 520 for system monitoring.   Features Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.   High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.   ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a pre-set value (min load: 15W). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a pre-set level, the inverter will remain on.   PWM solar charger The solar charger ensures that the batteries are charged by energy harvested from your solar panels. The charge algorithm is programmable.   Remote on/off The Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to turn the inverter on or off remotely. Alternatively, a remote on/off switch can be connected to a two-pole connector or between battery plus and the left-hand contact of the two-pole connector.   LED diagnosis Please see the manual for a description.   Bluetooth The inverter and solar charger parameters can be read and monitored via Bluetooth using the VictronConnect app.   VE.Direct communication port The VE.Direct Port can be used for connection to a GX device or GlobalLink 520 for system monitoring.   Monitoring via the VictronConnect app or GX device: Inverter in- and output voltage and % load Solar power, voltage, and current Operational state and alarms   Fully configurable via the VictronConnect app: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V and Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Battery charge current, algorithm, and voltages Battery charge temperature compensation or low temperature cut of level   To transfer the load to another AC source: the automatic transfer switch For our low-power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. GTIN 8719076053705 Voltage 24V Cont. output power at 25°C 250VA Peak Power 400W Output AC Voltage 230V Efficiency 88% Bluetooth Enabled Yes Plug Type IEC Protection Category IP21 Dimensions H86 x W165 x D260mm Weight 2.4 Warranty 5 Years Country of Manufacture India

Read more less

The solar charger ensures that the batteries are being charged by energy harvested from your solar panels. The charge algorithm is programmable. The inverter and solar charger parameters can be read out via Bluetooth using the VictronConnect app. In addition to this, the inverter has a VE.Direct Port for connection to a GX device or GlobalLink 520 for system monitoring.   Features Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.   High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.   ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a pre-set value (min load: 15W). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a pre-set level, the inverter will remain on.   PWM solar charger The solar charger ensures that the batteries are charged by energy harvested from your solar panels. The charge algorithm is programmable.   Remote on/off The Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to turn the inverter on or off remotely. Alternatively, a remote on/off switch can be connected to a two-pole connector or between battery plus and the left-hand contact of the two-pole connector.   LED diagnosis Please see the manual for a description.   Bluetooth The inverter and solar charger parameters can be read and monitored via Bluetooth using the VictronConnect app.   VE.Direct communication port The VE.Direct Port can be used for connection to a GX device or GlobalLink 520 for system monitoring.   Monitoring via the VictronConnect app or GX device: Inverter in- and output voltage and % load Solar power, voltage, and current Operational state and alarms   Fully configurable via the VictronConnect app: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V and Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Battery charge current, algorithm, and voltages Battery charge temperature compensation or low temperature cut of level   To transfer the load to another AC source: the automatic transfer switch For our low-power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.   DC and PV connections with screw terminals No special cable terminals or tools are needed for installation. GTIN 8719076053699 Voltage 12V Cont. output power at 25°C 250VA Peak Power 400W Output AC Voltage 230V Efficiency 87% Bluetooth Enabled Yes Plug Type IEC Protection Category IP21 Dimensions H86 x W165 x D260mm Weight 2.4 Warranty 5 Years Country of Manufacture India

Read more less

Features of the - Victron Phoenix Inverter Compact 12V/1600VA VE.Bus SinusMax - Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. New applications of high power inverters The possibilities of paralleled high power inverters are truly amazing.

Read more less

This Victron Product benefits from a 5 year warranty Functionally, this device bears resemblance to the EV Charging Station. However, it features a modern design, available in a choice of three colours, and it is stripped of the built-in LCD screen. VictronConnect handles the initial setup, configuration, and monitoring through Bluetooth, the integrated web interface via WiFi Access Point, or a WiFi LAN. This charger can be seamlessly integrated into the Victron Energy GX Device and VRM systems, permitting remote control of the station. Moreover, with solar energy incorporated into the Victron ecosystem, excess solar energy can be utilized to power your vehicle. Manual and scheduled modes allow for further flexibility to satisfy the EV’s requirements, depending on the system. The charging port is surrounded by an entirely programmable RGB light ring that flashes varying light effects based on the current state of the charger (connected, charging, fully charged, etc.), offering a quick way to determine the device’s status.

Read more less

Part No: SOL-S6-EH3P12K-H Storage Systems - Hybrid Inverter Features: Integrated 4 MPPTs for multiple array orientations Up to 50A max charge/discharge current String current up to 20A, perfectly match large current modules 10 second 200% surge power backup overload capability Supports Max 6 pcs in parallel Up to 200% DC oversizing Supports Unbalanced and Half-Wave Loads on both the Grid and Backup Port Supports peak shaving control in both "self-use" and "generator" mode 6 customisable charge/discharge time settings Automatic UPS switching Intelligent AC coupling scheme, easily upgrade existing grid-connected systems Note: Including 3 current sensors for direct connection to the inverter

Read more less

Part No: SOL-S6-EA1P6K-L Storage Systems - Charger-Inverter Solis Single Phase Low Voltage AC-Coupled Inverters Supports Peak Shaving Mode Industry leading to a max 125A/6kW max charge/discharge rating Provide intelligent time of use solution together with the monitoring group Increased battery protection and operation features to extend battery life Real-time battery monitoring, remote upgrade, and battery healing function to prolong battery life 40-60V battery voltage range 19.9kg weight  1P66 Ingress protection 

Read more less