Inverters

Solax X3 MEGA G2 60kW 3ph solar inverter, which delivers up to 98.4% efficiency and a maximum input voltage of 1100V as well as outstanding energy performance with its wide MPPT voltage range, enhancing power yield. The Solax X3 Mega G2 is IP66 rated, and equipped with safety and security features such as Arc-fault circuit                                                 interrupter and SPD protection.  AC attributes Max rated power: 60kW Max rated current: 87A Number of phases: 3 DC attributes Max power 90kW Max Isc currentMPPT range 46A180-1000V Max voltage 1100V Start up voltage 200V System Max efficiency 98.4% IP rating IP66 Weight 44.5kg Dimensions 630 x 521 x 286mm Key features IP66 ProtectionAFCI ProtectionOver current and temperature protectionOver/under voltage protectionBuilt-in export power control

Read more less

Manufacturer Code: ACS 3600 Order Code: LUX-AC-STANDARD Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Luxpower’s ACS Inverter is a retrofit solution designed for transforming existing on-grid systems into efficient energy storage systems. This lightweight and compact inverter serve as the ideal choice for retrofitting and upgrading your current on-grid setup. While it cannot directly connect to PV panels, its primary purpose is to facilitate the transformation of your existing grid-tied system. Key Features Retrofit any on-grid/micro-grid system to energy storage system Allows up to eight batteries connected Battery charging/discharging current: 70A Compatible with dynamic Octopus energy pricing Advanced weather compensation programming On/off grid seamless switching Separate EPS port for flexible load management Free monitoring – For mobile & web portal (PC)   PV Input Max. PV array power : N/A Max. input voltage : N/A MPPT voltage range / rated input voltage : N/A Min. input voltage / start voltage : N/A No. of independent MPPT trackers / strings per MPPT input : N/A Max. input current per MPP tracker : N/A Max. short-circuit current per MPP tracker : N/A Battery Input Nominal battery voltage : 48V Battery voltage range : 40V to 60V Max. charging / discharge power : 3600W Max. charging current / Max. discharging current : 70A Battery type : Lithium-ion AC Output AC voltage range / Nomlnal AC voltage : 230V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 3600W Max. apparent power : Rated grid output current (@230V) : 16A Max. grid output current : AC Input Rated grid voltage : 230V Rated apparent power : 6000W Max. input apparent power from grid : Rated input curent from grid : Max. input current from grid : 26A EPS Output Nominal output voltage : 230V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : Max. output apparent power : 3600w Peak output apparent power : 4500W | 30s Max. output current : 16A Max. switch time : 20ms Efficiency MPPT efficiency : Euro efficiency / Max. efficiency : 97.0%/97.3% Max. battery to load efficiency : 94.50% General Data Dimensions (W*H*D) (mm) : 550*320*110 Device weight : 15.6Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : <25dB Standby consumption : <10 Degree of protection (as per lEC 60529) : IP65 Features User interface : LCD & APP Communication with BMS : RS485/WiFi/CAN Communication with meter : Communication with portal : Other communication : Wi-Fi Communication : LCD/ LED/RS485/ Wi-Fi/ CAN Integrated power control / Zero export control : Certifications : IEC62109-1 | IEC62040| EN 61000-6-1:2007 | EN 61000-6-3:2007+A1:2011+ AC:2012 | EN 61000-3-2:2014 | EN 61000-3-3:2013 | VDE-AR-N 4105 Warranty : 12 years  

Read more less

Part No: FE-H3-10.0-SMART Storage Systems - Hybrid Inverter

Read more less

Compatible Products Hanchu High Voltage Battery 5.12kWh Hanchu High Voltage Battery 5.12kWh - BMS Hanchu High Voltage Battery 2.7kWh Hanchu High Voltage Battery 2.7kWh - BMS   Manufacturer Code: HESS-HY-T-8K Order Code: HC-8kW-3 Phase Controller Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP66 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems.   PV Input Max. PV array power : 12000Wp Max. input voltage : 1100V MPPT voltage range / rated input voltage : 200V to 950V/630V Min. input voltage / start voltage : 60V/180V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 20A Max. short-circuit current per MPP tracker : 30A Battery Input Nominal battery voltage : / Battery voltage range : 120V to 600V Max. charging / discharge power : 8000W Max. charging current / Max. discharging current : 36A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 270V to 480V /3/N/PE | 220/380V; 230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 8000VA Max. apparent power : 8000VA Rated grid output current (@230V) : 11.6A Max. grid output current : 12.8A AC Input Rated grid voltage : 3/N/PE | 220/380V;230/400V;240/415V Rated apparent power : 16000W Max. input apparent power from grid : / Rated input curent from grid : / Max. input current from grid : 23.2A EPS Output Nominal output voltage : 3/N/PE | 220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 8000VA Max. output apparent power : / Peak output apparent power : 2 times of rated power | 10s Max. output current : 11.6A Max. switch time : ＜10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.9%/98.4% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 545*465*205 Device weight : 24.5Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : / Standby consumption : / Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/5G/Bluetooth Other communication : / Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/VDE 4105/VFR 201/ G98/G99/G100/CEI 0-21/NEN Warranty : 12 years

Read more less

The EcoFlow PowerOcean Battery sets a new standard in home energy storage, featuring cutting-edge safety elements like LFP battery technology and a built-in fire prevention module. Engineered with an IP65-rated enclosure, it offers strong protection against dust and water, delivering a durable and dependable power solution for your home.To be installed with Power Ocean Plus 3ph hybrid inverters.The Base and Junction Box can stack a maximum of 15kWh capacity, which is 3 batteries.

Read more less

PRODUCT FEATURES High frequency switching technology Wide voltage range and low start-up voltage 2 MPPT design with precise MPPT algorithm Integrated Export Power Manager (EPM) AFCI protection, proactively reduces fire risk Compact and lightweight Friendly and adaptable connection to the grid Integrated DC switch Manufacture       rSolis Phases       1 Phase Power Rating        kW4.6 Inverter Type        String Inverter Built in DC          Yes Built in Communication         Optional Commodity Code         85044085 Dimensions (mm) (H x W x D)        543 x 310 x 160

Read more less

With the LCD user interface an overview of all important energy flows of inverter and load is provided. PV energy can be used more efficiently , thereby significantly increasing self-consumption. Additionally, PV feed-in power is going to be limited in some countries. Energy management with the Solis export power manager allows for higher self-consumption and efficient use of the locally generated PV power. This is for single phase solis inverters. Simultaneously monitor the operating data of the 80 x Solis inverters, saving the cost of multiple monitoring systems. Each of the inverters connected can be different models. The secondary current of the EPM for CT clamps is 5A meaning it is much easier to get a range of CT clamps for your site (CT clamps not included with EPM). Manufacturer          Solis Accessory Product Type           Power Management Commodity Code           85437090 Dimensions (mm) (H x W x D)276 x 364 x 114

Read more less

Part No: SOL-S6-EH1P8K-L-PLUS Storage Systems - Hybrid Inverter Features: Built-in Backup Port with Automatic UPS switching Up to 190A max charge/discharge current Up to 200% DC oversizing 6 customisable charge/discharge time settings 10 second 200% surge power backup overload capability Generator connectivity with multiple input methods and automatic generator On/Off control Supports 1ph and 3ph flexible connection with max 48kW in parallel Intelligent AC coupling scheme, easily upgrade existing grid-connected systems Supports peak shaving control in both "self-use" and "generator" mode Compatible with lead-acid and lithium batteries, with multiple battery protection features Does not include a DC cable for connecting to battery storage.

Read more less

Part No: SE-10000-3PH-RWB Storage Systems - Hybrid Inverter 48V StorEdge Three Phase Inverter - with Backup Capability SE5K-RWB /  SE8K-RWB / SE10K-RWB Requires the SolarEdge Backup Interface (SE-SBI-3PH) for backup function to work. Simple installation with single inverter for managing both PV production and battery storage Designed to eliminate high voltage during installation, maintenance or firefighting for enhanced safety More energy using DC-coupled solution architecture that stores PV power directly to the battery without AC conversion losses Built-in-module-level monitoring and full visibility of battery status, PV production, and self-consumption data Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp. The 3PH Home Hub inverters MUST have the energy meter (SE-WND-3Y400-MB-K2) installed with 3 x SolarEdge CT clamps.

Read more less

Compatible Products Hanchu High Voltage Battery 5.12kWh Hanchu High Voltage Battery 5.12kWh - BMS Hanchu High Voltage Battery 2.7kWh Hanchu High Voltage Battery 2.7kWh - BMS Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP66 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems. PV Input Max. PV array power : 15000Wp Max. input voltage : 1100V MPPT voltage range / rated input voltage : 200V to 950V/630V Min. input voltage / start voltage : 60V/180V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 20A Max. short-circuit current per MPP tracker : 30A Battery Input Nominal battery voltage : / Battery voltage range : 120V to 600V Max. charging / discharge power : 10000W Max. charging current / Max. discharging current : 36A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 270V to 480V /3/N/PE | 220/380V; 230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 10000VA Max. apparent power : 10000VA Rated grid output current (@230V) : 14.5A Max. grid output current : 16A AC Input Rated grid voltage : 3/N/PE | 220/380V;230/400V;240/415V Rated apparent power : 20000W Max. input apparent power from grid : / Rated input curent from grid : / Max. input current from grid : 29.0A EPS Output Nominal output voltage : 3/N/PE | 220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 10000VA Max. output apparent power : / Peak output apparent power : 2 times of rated power | 10s Max. output current : 14.5A Max. switch time : ＜10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.9%/98.4% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 545*465*205 Device weight : 24.5Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : / Standby consumption : / Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/5G/Bluetooth Other communication : / Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/VDE 4105/VFR 201/ G98/G99/G100/CEI 0-21/NEN Warranty : 12 years

Read more less

Technical Features  Automatic UPS switching Supports Max 6pcs in parallel Up to 50A max charge/discharge current Integrated 4 MPPTs for multiple array orientations 6 customisable charge/discharge time settings 10 second 200% surge power backup overload capability String current up to 20A, perfectly match large current modules Supports peak shaving control in both "self-use" and "generator" mode Supports Unbalanced and Half-Wave Loads on both the Grid and Backup Port Intelligent AC coupling scheme, easily upgrade existing grid-connected systems Application.    Commercial Promotion.       Solis Pylon Combo Manufacturer.      Solis Phases.      3 Phase Power Rating.        kW20 Inverter Type.      Hybrid Inverter No. of MPPT.      4 Commodity Code.       85044086 Dimensions         (mm) (H x W x D)563 x 546 x 235

Read more less

FeaturesHybrid Inverter/ChargerThe Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with 450VDC 4kWp PV input.Combination of an inverter, AC charger, and Solar MPPTThe inverter produces a perfect sine wave, and able to supply high powered appliances. It is also bi-directional, charging the battery when excess solar power or AC supply is available, or converting from the battery when it is needed.Wide MPPT voltage range80 – 450VDC, with a 120 VDC PV startup voltage.Light weight, efficient and quietThanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.Display, Bluetooth and VictronConnect appThe display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device, using the VictronConnect app.Extendable PV capacity, both AC-coupled and DC-coupledThe integrated 4kWp PV capacity can be extended by adding Solar Chargers to the system, for example our Smart Solar Charger range, including the Smart Solar RS models. When connected in a VE.Can network, all battery charging will operate synchronously and coordinated.Alternatively, the PV capacity can be extended by installing PV Inverters, of which the output power will be automatically controlled by the integrated Frequency Shift Power Control.Communication portsVE.Can connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring.I/O ConnectionsProgrammable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS.

Read more less

The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, a fire prevention module, and an IP65-certified design. The EcoFlow PowerOcean comes with a 15-year warranty, with batteries expandable up to 45kWh while offering over 6,000 charge cycles. The EcoFlow PowerOcean is a secure, scalable, and future-proof power investment for your home. Main features: 15 year industry leading warranty Instant cell-level Anti-Fire protection Built in heating pads to ensure optimum performance even in sub-zero temperatures. UK technical support IP65 certification, ensuring it stands strong against dust ingress and resistant to low-pressure water jets from any direction. 95% D.O.D Expandable up to 45kWh per inverter Expandable up to 2 inverters in parallel  Individual BMS allowing optimal performance and ensures compatibility with newer model batteries Industry-leading APP API to charge from Octopus tariffs such as Agile & Flux Sleek, slim design    At the heart of EcoFlow PowerOcean lies our advanced LFP battery pack, meticulously engineered for peak performance and unparalleled safety. This battery pack blends high-efficiency output with innovative safety features, delivering relentless power and peace of mind to all PowerOcean users.

Read more less

Part No: PYL-F-H3-BATT-BMU-15.4 Storage Systems - Li-ion Battery Pack Weight: 146.2 kg Battery Type: Lithium Ion Nominal Energy: 15360 Wh Depth of discharge: 95.00 % Voltage: 307 V Continuous Discharge Rate (Normal Use): 15360 W Maximum Discharge Rate (5 Minutes): 15360 W Surge Discharge Rate (15 Seconds): 16896 W Maximum Charge Rate (5 Minutes): 15360 W

Read more less

Part No: PYL-F-H3-BATT-BMU-10.2 Storage Systems - Li-ion Battery Pack Weight: 104.2 kg Battery Type: Lithium Ion Nominal Energy: 10200 Wh Depth of discharge: 95.00 % Voltage: 204 V Continuous Discharge Rate (Normal Use): 10200 W Maximum Discharge Rate (5 Minutes): 10200 W Surge Discharge Rate (15 Seconds): 10608 W Maximum Charge Rate (5 Minutes): 10200 W

Read more less

The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, a fire prevention module, and an IP65-certified design. The EcoFlow PowerOcean comes with a 15-year warranty, with batteries expandable up to 45kWh while offering over 6,000 charge cycles. The EcoFlow PowerOcean is a secure, scalable, and future-proof power investment for your home. Main features: 15 year industry leading warranty Instant cell-level Anti-Fire protection Built in heating pads to ensure optimum performance even in sub-zero temperatures. UK technical support IP65 certification, ensuring it stands strong against dust ingress and resistant to low-pressure water jets from any direction. 95% D.O.D Expandable up to 45kWh per inverter Expandable up to 2 inverters in parallel  Individual BMS allowing optimal performance and ensures compatibility with newer model batteries Industry-leading APP API to charge from Octopus tariffs such as Agile & Flux Sleek, slim design    At the heart of EcoFlow PowerOcean lies our advanced LFP battery pack, meticulously engineered for peak performance and unparalleled safety. This battery pack blends high-efficiency output with innovative safety features, delivering relentless power and peace of mind to all PowerOcean users.  

Read more less

Part No: FE-H3-6.0-SMART Storage Systems - Hybrid Inverter Supplier Part No: H3-6.0 SMART Weight: 34 kg Rated Power: 6,000 W Min PPT Voltage: 140 V Max PPT Voltage: 1,000 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,000 V Max Input Voltage: 1,000 V Max DC Power: 13,200 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,600 W Max DC Current: 60 A Max DC Inputs: 3 Has DC Fuses: 1 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.2 % Transformer: N/A MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 10 years

Read more less

Part No: SE-10000H-NET Inverters - Main Units Rating: 10,000W Phases: 1 SolarEdge Home Wave Inverter- Network Ready Optimized Installation With HD-Wave Technology Features: Specifically designed to work with SolarEdge Power Optimizers Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Industry leading efficiency with 200% DC oversizing Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer string   Supplier Part No: SE10000H-RW000BEN4 Weight: 16.5 kg Rated Power: 10,000 W Min PPT Voltage: 184 V Max PPT Voltage: 265 V DC Startup Voltage: 0 V DC Shutdown Voltage: 480 V Max Input Voltage: 480 V Max DC Power: 20,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,001 W Max DC Current: 25.5 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 3 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: SE-6000H-NET Inverters - Main Units Rating: 6,000W Phases: 1 SolarEdge Home Wave Inverter- Network Ready  Optimized Installation With HD-Wave Technology Features: Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer strings Advanced safety feature - integrated arc fault protection   Supplier Part No: SE6000H-RW000BEN4 Weight: 10.6 kg Rated Power: 6,000 W Min PPT Voltage: 0 V Max PPT Voltage: 0 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,000 W Max DC Current: 16.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

This part is a special offer made up of the following items: Part   1 x FE-HV-ECM-4100 Fox ECS 4.03kWh HV Battery (Master)   1 x FE-HV-ECS-4100 Fox ECS 4.03kWh HV Battery (Slave)   1 x FE-H1-3.7-G2 Fox H1 3.7kW Hybrid Inverter 1PH G2 Weight: 95.05 kg

Read more less

Part No: FE-T-10.0 Inverters - Main Units Rating: 10,000W Phases: 3 FOX ESS - PV Inverter - T Series - 10.0kW T10-G3   Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: T10 Weight: 17 kg Rated Power: 10,000 W Min PPT Voltage: 140 V Max PPT Voltage: 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 11,000 W Max DC Current: 14 A Max DC Inputs: 2 Has DC Fuses: 2 Connector: MC4   Included Connectors: 2 Euro Efficiency: 97.8 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-H3-12.0 Storage Systems - Hybrid Inverter Weight: 28 kg Rated Power: 12,000 W Min PPT Voltage: 160 V Max PPT Voltage: 950 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 12,000 W Surge AC Power (1 Second): 13,200 W Max DC Current: 26 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 98 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Solis GPRS Stick for up to 10 Inverters - Data logging stick  Fault alarm, real-time monitoringStatus indicator, easy to display working statusPlug and play, convenient and fastRESET button, one key to send data, convenientdebugging 

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer.        Solis Phases.         1 Phase Power Rating        kW2.5 Inverter Type.       String Inverter Built in DC.        Yes No. of MPPT.     1 Built in Communication.        Optional Commodity Code.        85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

Part No: X3-HYBRID-G4-8.0-V2 Storage Systems - Hybrid Inverter Superseding the extremely successful X-Hybrid generation 3, the newest X-Hybrid generation 4 has been designed and developed using the very latest solar technology. SolaX has pushed back the boundaries for what is possible when designing a storage inverter. High-Efficiency 150% PV oversized and 110% overload output. Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking function Economic Maximum 16A DC input current, support for high power solar panels Low start output voltage Less energy loss from battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment PLEASE NOTE: We are still awaiting some documents from SolaX for this range - these will be uploaded as soon as they are received.   Supplier Part No: X3-HYBRID-8.0-D G4.2 (wifi incl) Weight: 30 kg Rated Power: 8,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 950 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.  PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).   Brand Victron Energy Manufacturer Part Number PMP122120000 Voltage 12V Transfer Switch (A) 16A Cont. Output Power at 25°C (VA) 1200 Peak Power (W) 2400 Max Efficiency 93% Zero Load Power (W) 10 Charge Current House Battery (A) 50 Charge Current Starter Battery (A) 1A(12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off/charger only Protection Category IP21 Dimensions H406 x W250 x D100mm Weight (kg) 8.2 Warranty 5 Years Country of Manufacture China

Read more less

Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122300000 Voltage 12 VA 3000 Peak Power (VA) 6000 Max Efficiency 93% IP Rating IP22 Dimensions (Including Terminals) H533 x W285 x D150mm Weight (kg) 19 Warranty 5 Years

Read more less

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.   Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.   PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.   Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.   Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.   Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.   On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.   Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number PMP482805000 GTIN 8719076050568 Voltage 48V Cont. Output Power at 25°C 8000VA Peak Power 15000W Output AC Voltage 230V Transfer Switch 100A Max. AC Input Current 100A Max. Battery Charge Current 110A Protection Category IP22 Efficiency 95% Bluetooth Compatible Yes Dimensions H642 x W363 x D206mm Weight 42Kg Warranty 5 Years

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer          Solis Phases            1 Phase Power Rating               kW1.5 Inverter Type              String Inverter Built in DC               Yes No. of MPPT            1 Built in Communication            Optional Commodity Code              85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

Part No: FE-EPS-BOX-SP Storage Systems - Accessory

Read more less

Manufacturer Code: GEN-LB-EU 7K Order Code: LUX-HYPA-7.0KW Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Designed for homeowners seeking reliable and efficient energy storage, the Luxpower’s single phase hybrid inverter delivers optimal solar energy use with high PV input and intelligent time-of-use charging. With advanced energy management features, it intelligently adapts to fluctuating energy demands, delivering both cost savings and energy independence. Its advanced PV input and parallel capacity allow for efficient power distribution, whether for immediate use or storage. The intuitive monitoring system gives you full control over your energy consumption, and with built-in backup capabilities, your home stays powered even during grid outages—ensuring energy security day and night. Key Features 2 MPPTs, Max. PV input 12kW Max. charging and discharging current: 146A Supports up to 10pcs in parallel for on/off grid Time of Use and weather optimisation charge for e-bill reduction PV Input Max. PV array power : 12000W Max. input voltage : 600V MPPT voltage range / rated input voltage : 120-500V/360V Min. input voltage / start voltage : 140V No. of independent MPPT trackers / strings per MPPT input : 2 | (2:2) Max. input current per MPP tracker : 25A Max. short-circuit current per MPP tracker : 34A Battery Input Nominal battery voltage : 48V Battery voltage range : 40-60V Max. charging / discharge power : 7000W Max. charging current / Max. discharging current : 146A Battery type : Lithium-ion/Lead-Acid AC Output AC voltage range / Nomlnal AC voltage : 180-270V/230V Rated AC grid frequency : 50/60Hz Rated apparent power : 7000W Max. apparent power : 7000W Rated grid output current (@230V) : 30.43A Max. grid output current : 30.43A AC Input Rated grid voltage : 230V Rated apparent power : 7000W Max. input apparent power from grid : 13800W Rated input curent from grid : 30.43A Max. input current from grid : 60A EPS Output Nominal output voltage : 230V Nominal output frequency : 50/60Hz Rated apparent power : 7000W Max. output apparent power : 7000W Peak output apparent power : 14000W (for 0.5s) Max. output current : 30.4A Max. switch time : <20ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.50% Max. battery to load efficiency : 94% General Data Dimensions (W*H*D) (mm) : 536*556*290mm Device weight : 42.64 kg Operating temperature range : -25C ~ +60C Noise emissions (typical) : <50 dB Standby consumption : <20W Degree of protection (as per lEC 60529) : IP65 / NEMA 4X Features User interface : Touch color screen | RS485/WiFi/CAN Communication with BMS : CANBUS and RS485 Communication with meter : Eastron meters | Baud rates: 2400bps / 19200bps Communication with portal : Other communication : RS485 / CAN / WiFi Communication : Integrated power control / Zero export control : Certifications : G99 | G100 | NRS 097 Warranty : 12 years  

Read more less

Manufacturer Code: HESS-HY-T-15K Order Code: HC-15kW 3 Phase Controller Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP65 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems.

Read more less

EcoFlow PowerOcean Plus Three-Phase  Home Solar Battery Solution The EcoFlow PowerOcean Plus redefines solar power utilisation to an extreme, especially for houses with big and complex roof structures. With up to 40kW solar input, 29.9kW AC output and dynamic tariff support, the system achieves maximum power independence and financial savings on energy bills. Full compatibility with all EcoFlow home energy Ecosystem products, smart monitoring and control over your household appliances can be achieved right now. The 29.9kW Three Phase Plus must be used with the Junction box Plus.  Support up to 4 PV strings, ideal for complex rooftop designs Support up to 40kW PV input, equivalent to 200 sqm of the total rooftop size. Up to 29.9kW AC output, power everything all at once, now with solar No appliance is too big for solar, maximising your entire home’s power independence EcoFlow home energy ecosystem supported From EV charging to heat pump, personalise your energy independence effortlessly Dynamic tariff supported Plan your energy purchases at low pricing, ensuring the maximised bill savings Seamless Whole-Home Backup Ensure uninterrupted energy supply with rapid switching androbust 29.9kW capacity. Unified Home Power, Simplified Control Smartly track power usage, solar input, and battery storage inreal time with just one app for your solar storage system, EVcharger, and heat pump. Prioritize solar energy, automaticallycharging your battery with excess energy for nighttime use. Integrated With Dynamic Tariff The dynamic tariff empowers you by granting access to yourchosen dynamic pricing platform, whether it's Nord Pool orTibber, as a reliable point of reference. Featuring real-time24-hour tariff pricing, this dashboard enables users to strategi-cally plan their energy purchases, ensuring they capitalise on themost economical rates available.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 6kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 6kW Max current: 26A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 5kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 5kW Max current: 21.7A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

Part No: SOL-METER-1PH-CT1 Display - Power Management ACR10R16DTE Single phase meter for Export Limitation with Solis 1-phase inverters. Comes with 120A CT. Meter allows for full 24 hour Consumption Monitoring. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems.  

Read more less

Leading Features:• Max. efficiency 97.7%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• 2 MPPT design with precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer      Solis Phases       1 Phase Power Rating        kW3 Inverter Type       String Inverter Built in DC        Yes No. of MPPT        2  Built in Communication        Optional Commodity Code       85044085 Dimensions (mm) (H x W x D)      543 x 310 x 160

Read more less

Smaller size higher efficiency a variety of power models available for selection. Adopt two MPPT access more flexible and efficient. Max. efficiency 98.0% IP66 > 150% DC/AC ratio String current up to 16A Supports RS485 WiFi GPRS Supports export power control Wide voltage range and low startup voltage AFCI protection proactively reduces fire risk Compact design simple installation and maintenance Supports high power modules for lower installation costs Scan to register on SolisCloud supports remote upgrade and control Automatic voltage stabilization technology in weak grid conditions Manufacturer     Solis Phases      3 Phase Power Rating       kW10 Inverter Type       String Inverter Built in       Yes No. of MPPT        2 Built in Communication         Optional Commodity Code       85044086 Dimensions (mm) (H x W x D)      310 x 563 x 219

Read more less

Max. efficiency 98.7% String current up to 16A Wide voltage range and low startup voltage AFCI protection proactively reduces fire risk Supports export power control Supports RS485 WiFi GPRS Scan to register on SolisCloud supports remote upgrade and control Automatic voltage stabilization technology in weak gridconditions Compact design simple installation and maintenance Supports high power modules for lower installation costs > 150% DC/AC ratio IP66 Manufacturer       Solis Phases      3 Phase Power Rating        kW6 Inverter Type        String Inverter Built in DC       Yes No. of MPPT        2 Built in Communication        Optional Commodity Code         85044085 Dimensions (mm) (H x W x D)      563 x 310 x 219

Read more less

The dual input section containing two independent Maximum Power Point Tracking (MPPT) allows optimal energy harvesting from two sub-arrays oriented in different directions. The TRIO features a high speed and precise MPPT algorithm for real power tracking and improved energy harvesting. NOTE: If installing a PV system using TRIO in North America please verify that the selected PV module is listed for use in 1000Vdc systems in accordance with local electrical codes. HIGHLIGHTS • True three-phase bridge topology for DC/AC output converter• Transformerless topology• Each inverter is set on specific grid codes which can be selected in the field• Detachable wiring box to allow an easy installation• Wide input range• ‘Electrolyte-free’ power converter to further increase the life expectancy and long term reliability Manufacturer        Solis Accessory Product Type          Power Management Commodity Code          85437090 Dimensions (mm) (H x W x D)364 x 276 x 114

Read more less

The Sunsynk 20kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 20000W. This three-phase inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty  

Read more less

Details The Sunsynk 8kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 8000W. This three-phase inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 422mm (W) x 702mm (H) x 281mm (D) Weight: 47.5kg Rated IP65 for ingress protection Five-year standard warranty  

Read more less

The X3 FORTH features a huge nine MPPTs while the 150% oversized PV power can help maximise your power yield. Its ingress protection rating of IP66 means it's highly resistant to dust and water damage so it's ideal for situating either internally or externally. Meanwhile, smart features such as the night-time power compensation and advanced heat dissipation improve its longevity and running costs. Key features Highly efficient three-phase inverter designed for commercial applications Nine MPP trackers, each with two strings Easy to install and set up 150% PV oversizing input; 110% overloading output 180~1000Vdc MPPT voltage range Inbuilt export power control  Remote setting and upgrading  Supports Smart I-V curve diagnosis Fuse-free design with smart string current monitoring AC terminal temperature detection and optional AFCI protection for safety Night-time reactive power compensation  Smart air cooling to extend the lifetime of the fan Advanced heat dissipation helps make the system compact and lightweight Maximum efficiency: 98.6%  Ingress protection: IP66 Dimensions: 985mm x 660mm x 327.5mm Weight: 83kg Five-year standard warranty

Read more less

Fox ESS AI Link The parallel function (installing multiple units on a single site).  Require an additional EMS.

Read more less

Technical Features Efficiency (max.) inverter: 98% Efficiency (EU) inverter: 97.5% MPPT voltage range (VDC): 200-850V Input current (max.): 16A Input voltage (VDC max.): 1000B DC Power (max.): 16kW Manufacturers warranty: 5 years Nominal voltage: 600V Inverter protection class: IP66 Rated capacity: 10kW Battery technology: Lithium ion Promotion.        Solis Pylon Combo Manufacturer.      Solis Inverter Type.       Hybrid Inverter No. of MPPT.         4 Commodity Code.         85044086 Dimensions.      (mm) (H x W x D)563 x 546 x 235

Read more less

Product features Mains connection: 3-phase AC output: 8 kVA 8 kW emergency power output via separate output MPP tracker: 4 with 1 string output each Max. short circuit current per MPPT: 24 A Max. input current: 16 A Communcations: CAN, RS485, Wi-Fi 3-phase smart meter with 3 current transformers included Incl. WiFi+LAN kit Protection category: IP66 Warranty: 5 years Manufacturer.     Solis Phases.     3 Phase Power.     Rating kW8 Inverter Type.      Hybrid Inverter No. of MPPT.     4 Commodity Code.       85044086 Dimensions.       (mm) (H x W x D)496 x 596 x 230  

Read more less

Compatible Products Hanchu High Voltage Battery 9.4kWh Hanchu High Voltage Battery 9.4kWh - BMS   Ultra Performance Exceptional Efficiency Achieves up to 98.8% peak efficiency, maximising the conversion of generated energy into usable power and significantly reducing energy costs. Robust Power Handling Supports up to 110% AC output overloading and up to 120% back-up output overloading for 60 seconds, ensuring reliable performance even during peak demand. Advanced Multi-MPPT Support Equipped with 4 MPPTs, enabling optimal solar energy capture across multiple roof orientations and shading conditions to maximise overall solar utilization. Reliable Operation Ultra-Fast Switching Time With EPS switching time of less than 20 milliseconds, it ensures continuity of critical operations without interruption during power outages. Broad Voltage Compatibility Supports an extensive battery voltage range from 135V to 750V, making it compatible with various high-voltage battery systems for greater versatility. Comprehensive Safety Protection Offers built-in surge protection, insulation resistance monitoring, and multi-layered safeguards against over-temperature and residual currents, ensuring protection for both the equipment and the premises. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Installation The horizontal design and quick plug-in terminals enable fast and convenient installation, minimising labour time and reducing complexity. Advanced Connectivity Offers simple configuration through WiFi via the iESS platform, streamlining setup and integration into existing systems. PV Input Max. PV array power : 37.5kW Max. input voltage : 1000V MPPT voltage range / rated input voltage : 200-850V Min. input voltage / start voltage : 135V No. of independent MPPT trackers / strings per MPPT input : 4 Max. input current per MPP tracker : 30A Max. short-circuit current per MPP tracker : 40A Battery Input Nominal battery voltage : / Battery voltage range : 135-750V Max. charging / discharge power : 25000W Max. charging current / Max. discharging current : 100A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 25.0kW Max. apparent power : 27.0kVA Rated grid output current (@230V) : / Max. grid output current : 42.0A AC Input Rated grid voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated apparent power : 25.0kW Max. input apparent power from grid : 30.0kVA Rated input curent from grid : / Max. input current from grid : / EPS Output Nominal output voltage : 3L/N/PE;220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 25.0kW Max. output apparent power : 27.5kVA Peak output apparent power : 30kVA | 60s Max. output current : 42.0A Max. switch time : ＜20ms Efficiency MPPT efficiency : 98.80% Euro efficiency / Max. efficiency : 98.30% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 800*620*300 Device weight : 76.0Kg Operating temperature range : -30℃~+60℃ Noise emissions (typical) : ＜50dB Standby consumption : ＜15W Degree of protection (as per lEC 60529) : IP65 Features User interface : OLED&LED&APP Communication with BMS : / Communication with meter : / Communication with portal : / Other communication : / Communication : RS485/CAN/WiFi/LAN(Optional) Integrated power control / Zero export control : Integrated/Integrated Certifications : IEC 62109/EN 61000/EN 50549-1/NTS/VDE-4105/G99/G100/CEI/NRS 097/CEI 0-21/NEN Warranty : 12 years

Read more less

The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, a fire prevention module, and an IP65-certified design. The EcoFlow PowerOcean comes with a 15-year warranty, with batteries expandable up to 45kWh while offering over 6,000 charge cycles. The EcoFlow PowerOcean is a secure, scalable, and future-proof power investment for your home. Main features: 15 year industry leading warranty Instant cell-level Anti-Fire protection Built in heating pads to ensure optimum performance even in sub-zero temperatures. UK technical support IP65 certification, ensuring it stands strong against dust ingress and resistant to low-pressure water jets from any direction. 95% D.O.D Expandable up to 45kWh per inverter Expandable up to 2 inverters in parallel  Individual BMS allowing optimal performance and ensures compatibility with newer model batteries Industry-leading APP API to charge from Octopus tariffs such as Agile & Flux Sleek, slim design    At the heart of EcoFlow PowerOcean lies our advanced LFP battery pack, meticulously engineered for peak performance and unparalleled safety. This battery pack blends high-efficiency output with innovative safety features, delivering relentless power and peace of mind to all PowerOcean users.

Read more less