Lux PowerTek Inverters

Manufacturer Code: Squirrel pod Order Code: LUX-AC-SQPD Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Luxpower’s Squirrel Pod Inverter is a retrofit solution designed for transforming existing on-grid systems into efficient energy storage systems. This lightweight and compact inverter serve as the ideal choice for retrofitting and upgrading your current on-grid setup. While it cannot directly connect to PV panels, its primary purpose is to facilitate the transformation of your existing grid-tied system. Different to ACS 3600, the Squirrel Pod has additional hardware that allows it to have up to six controllers attached to them, multiplying their power. Requiring their own battery, it can be connected individually or through a combined connection to a main fuse box. The Squirrel Pod works in parallel, meaning that only the primary controller has CT clamps fitted, with other units all set to subordinate working mode. All Squirrel Pod units are listed on the ENA Register, with G100 certification. Key Features Retrofit any on-grid/micro-grid system to energy storage system Modular expansion – link up to 6 units together Allows up to eight batteries connected Battery charging/discharging current: 70A Compatible with dynamic Octopus energy pricing Advanced weather compensation programming On/off grid seamless switching Separate EPS port for flexible load management Free monitoring – For mobile & web portal (PC)   PV Input Max. PV array power : N/A Max. input voltage : N/A MPPT voltage range / rated input voltage : N/A Min. input voltage / start voltage : N/A No. of independent MPPT trackers / strings per MPPT input : N/A Max. input current per MPP tracker : N/A Max. short-circuit current per MPP tracker : N/A Battery Input Nominal battery voltage : 48V Battery voltage range : 40V to 60V Max. charging / discharge power : 3600W Max. charging current / Max. discharging current : 70A Battery type : Lithium-ion AC Output AC voltage range / Nomlnal AC voltage : 230V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 3600W Max. apparent power : Rated grid output current (@230V) : 16A Max. grid output current : AC Input Rated grid voltage : 230V Rated apparent power : 6000W Max. input apparent power from grid : Rated input curent from grid : Max. input current from grid : 26A EPS Output Nominal output voltage : 230V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : Max. output apparent power : 3600w Peak output apparent power : 4500W | 30s Max. output current : 16A Max. switch time : 20ms Efficiency MPPT efficiency : Euro efficiency / Max. efficiency : 97.0%/97.3% Max. battery to load efficiency : 94.50% General Data Dimensions (W*H*D) (mm) : 550*320*110 Device weight : 15.6Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : <25dB Standby consumption : <10 Degree of protection (as per lEC 60529) : IP65 Features User interface : LCD & APP Communication with BMS : RS485/WiFi/CAN Communication with meter : Communication with portal : Other communication : Wi-Fi Communication : LCD/ LED/RS485/ Wi-Fi/ CAN Integrated power control / Zero export control : Certifications : IEC62109-1 | IEC62040| EN 61000-6-1:2007 | EN 61000-6-3:2007+A1:2011+ AC:2012 | EN 61000-3-2:2014 | EN 61000-3-3:2013 | VDE-AR-N 4105 Warranty : 12 years  

Read more less

Manufacturer Code: GEN-LB-EU 7K Order Code: LUX-HYPA-7.0KW Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Designed for homeowners seeking reliable and efficient energy storage, the Luxpower’s single phase hybrid inverter delivers optimal solar energy use with high PV input and intelligent time-of-use charging. With advanced energy management features, it intelligently adapts to fluctuating energy demands, delivering both cost savings and energy independence. Its advanced PV input and parallel capacity allow for efficient power distribution, whether for immediate use or storage. The intuitive monitoring system gives you full control over your energy consumption, and with built-in backup capabilities, your home stays powered even during grid outages—ensuring energy security day and night. Key Features 2 MPPTs, Max. PV input 12kW Max. charging and discharging current: 146A Supports up to 10pcs in parallel for on/off grid Time of Use and weather optimisation charge for e-bill reduction PV Input Max. PV array power : 12000W Max. input voltage : 600V MPPT voltage range / rated input voltage : 120-500V/360V Min. input voltage / start voltage : 140V No. of independent MPPT trackers / strings per MPPT input : 2 | (2:2) Max. input current per MPP tracker : 25A Max. short-circuit current per MPP tracker : 34A Battery Input Nominal battery voltage : 48V Battery voltage range : 40-60V Max. charging / discharge power : 7000W Max. charging current / Max. discharging current : 146A Battery type : Lithium-ion/Lead-Acid AC Output AC voltage range / Nomlnal AC voltage : 180-270V/230V Rated AC grid frequency : 50/60Hz Rated apparent power : 7000W Max. apparent power : 7000W Rated grid output current (@230V) : 30.43A Max. grid output current : 30.43A AC Input Rated grid voltage : 230V Rated apparent power : 7000W Max. input apparent power from grid : 13800W Rated input curent from grid : 30.43A Max. input current from grid : 60A EPS Output Nominal output voltage : 230V Nominal output frequency : 50/60Hz Rated apparent power : 7000W Max. output apparent power : 7000W Peak output apparent power : 14000W (for 0.5s) Max. output current : 30.4A Max. switch time : <20ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.50% Max. battery to load efficiency : 94% General Data Dimensions (W*H*D) (mm) : 536*556*290mm Device weight : 42.64 kg Operating temperature range : -25C ~ +60C Noise emissions (typical) : <50 dB Standby consumption : <20W Degree of protection (as per lEC 60529) : IP65 / NEMA 4X Features User interface : Touch color screen | RS485/WiFi/CAN Communication with BMS : CANBUS and RS485 Communication with meter : Eastron meters | Baud rates: 2400bps / 19200bps Communication with portal : Other communication : RS485 / CAN / WiFi Communication : Integrated power control / Zero export control : Certifications : G99 | G100 | NRS 097 Warranty : 12 years  

Read more less

Manufacturer Code: GEN2-LB-EU 5K Order Code: LUX-HYPA-5.0 Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Designed for homeowners seeking reliable and efficient energy storage, the Luxpower’s LXP single phase hybrid inverter delivers optimal solar energy use with high PV input and intelligent time-of-use charging. With advanced energy management features, it intelligently adapts to fluctuating energy demands, delivering both cost savings and energy independence. Its advanced PV input and parallel capacity allow for efficient power distribution, whether for immediate use or storage. The intuitive monitoring system gives you full control over your energy consumption, and with built-in backup capabilities, your home stays powered even during grid outages—ensuring energy security day and night. Key Features 2 MPPTs with Max. PV Input of 9.6kW 18A Max. PV Input Current per MPPT Parallel Operation Support: Up to 10 units for both on-grid and off-grid systems 24/7 Real-Time Monitoring: Access and manage remotely Integrated EPS as standard – switching time 7ms MPPT efficiency 99.9% IP66 rated   PV Input Max. PV array power : 9600W Max. input voltage : 530V MPPT voltage range / rated input voltage : 150-425V Min. input voltage / start voltage : 100V No. of independent MPPT trackers / strings per MPPT input : 2 | (1:1) Max. input current per MPP tracker : 18A Max. short-circuit current per MPP tracker : 32A Battery Input Nominal battery voltage : 48A Battery voltage range : 40-60V Max. charging / discharge power : 5000W Max. charging current / Max. discharging current : 120A Battery type : lithium-ion/lead-acid AC Output AC voltage range / Nominal AC voltage : 230V Rated AC grid frequency : 50/60Hz Rated apparent power : 5000W Max. apparent power : 5000W Rated grid output current (@230V) : 21.7A Max. grid output current : AC Input Rated grid voltage : 230V Rated apparent power : 5000W Max. input apparent power from grid : Rated input curent from grid : 12000W Max. input current from grid : EPS Output Nominal output voltage : 230V Nominal output frequency : 50/60Hz Rated apparent power : Max. output apparent power : 5000W Peak output apparent power : Max. output current : 21.7A Max. switch time : 7ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.30% Max. battery to load efficiency : 94.5% General Data Dimensions (W*H*D) (mm) : 440*528*220mm Device weight : 25kg Operating temperature range : -25C ~+60C Noise emissions (typical) : 50dB Standby consumption : Degree of protection (as per lEC 60529) : IP66 Features User interface : LCD & APP Communication with BMS : RS485/WiFi/CAN Communication with meter : Communication with portal : Other communication : Wi-Fi Communication : LCD/ LED/RS485/ Wi-Fi/ CAN Integrated power control / Zero export control : Certifications : EN 62109/EN 61000 | IEC 62116 | IEC 61727 | IEC 61683 | G100/G99/G98 | PIPEREE TypeA | CEI 0-21:2022 (V2:2024-01) Warranty : 10 years  

Read more less

Manufacturer Code: LXP 12000 Order Code: LUX-HYPA-12KW Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Designed for homeowners seeking reliable and efficient energy storage, the Luxpower’s LXP single phase hybrid inverter delivers optimal solar energy use with high PV input and intelligent time-of-use charging. With advanced energy management features, it intelligently adapts to fluctuating energy demands, delivering both cost savings and energy independence. Its advanced PV input and parallel capacity allow for efficient power distribution, whether for immediate use or storage. The intuitive monitoring system gives you full control over your energy consumption, and with built-in backup capabilities, your home stays powered even during grid outages—ensuring energy security day and night. Key Features Allows up to eight batteries connected Integrated EPS as standard – switching time 20ms Smart export control on both AC & EPS output MPPT efficiency 99% IP65 rated Compatible with dynamic Octopus energy pricing Advanced weather compensation programming Firmware and parameter remote upgrades Free monitoring – For mobile & web portal (PC)   PV Input Max. PV array power : 18000W Max. input voltage : 600V MPPT voltage range / rated input voltage : 120-500V Min. input voltage / start voltage : 100/140V No. of independent MPPT trackers / strings per MPPT input : 3 MPPT / 4 inputs Max. input current per MPP tracker : 25/15/15 Max. short-circuit current per MPP tracker : 31/19/19 Battery Input Nominal battery voltage : 48V Battery voltage range : 40-60V Max. charging / discharge power : 12000W Max. charging current / Max. discharging current : 250A Battery type : lithium-ion/lead-acid AC Output AC voltage range / Nomlnal AC voltage : 230V Rated AC grid frequency : 50/60Hz Rated apparent power : 12000W Max. apparent power : 12000W Rated grid output current (@230V) : 50A Max. grid output current : AC Input Rated grid voltage : 230W Rated apparent power : 11500W Max. input apparent power from grid : Rated input curent from grid : 23000W Max. input current from grid : 200A EPS Output Nominal output voltage : 230V Nominal output frequency : 50/60Hz Rated apparent power : Max. output apparent power : 11500W Peak output apparent power : Max. output current : 50A Max. switch time : 20ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 99.90% Max. battery to load efficiency : 96% General Data Dimensions (W*H*D) (mm) : 490*670*265mm Device weight : 50kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : <50dB Standby consumption : Degree of protection (as per lEC 60529) : IP65 Features User interface : Touch colour screen Communication with BMS : RS485/WiFi/CAN Communication with meter : Communication with portal : Other communication : Wi-Fi Communication : Wi-Fi/ CAN Integrated power control / Zero export control : Certifications : NRS 097-2-1 | G98 | CE. Warranty : 12 years  

Read more less