Photovoltaic

Part No: BIRD-MESH-BLK Accessories - Bird Protection 30m Solar Panel Bird Exclusion Mesh Galvanized Mesh To Prevent Bird Nesting  30 Meter roll PVC Coated Galvanised Welded Mesh 25 mm X 12.5mm openings on a 200mm X 30m roll This mesh is the correct size to fit our solar panel mesh clips (WM132) Handy 200mm wide roll, saves time and cost in cutting down wider rolls of mesh The solar panel mesh clip holds the weld mesh securely against the solar panel to deter bird entry Manufactured from: 16 gauge / 1.5  mm diameter hot dipped galvanised wire then pvc coated in black Note: Optional BORD-MESH-CLIPS   Supplier Part No:BIRD-MESH-BLK Weight:7.565 kg

Read more less

Single phase ECA2 meter Z version without pulsed output (this is not the flashing LED but actually a physical connection with a transistor output. This is normally used with Data loggers but is rarely used in PV metering).

Read more less

AC Isolator Switch  4 Pole Enclosed 63A AC Switch Isolator  IP65 Protection Rating (enclosure) EN 60947-3 Compliant Multiple Gland Knockouts Lockable Rotary Handle Flame Retardant External Mounting Points Additional Earth Connection Interlocked Enclosure Lid Measurements H - 175 W - 115 D - 100 D including handle - 135   Supplier Part No:IS4P63 Weight:0.75 kg Rated Power:14,490 W Poles:4 Max Cable:16 mm2 Max Voltage:690 V Rated Current:63 A Rated Voltage:230 V Rated Current:63 A Rated Voltage:440 V

Read more less

The MC4-Evo2A is the latest addition to the Stäubli Electrical Connector PV portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) MC4 Evo 2 Female cable coupler as individual part (including insulating part)   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL. THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.       DI comes with Maroon seal. Supplier Code: 32.0316P0001 Rated current: 45A 4mm2 and 53A 6mm2 cables Important The MC4-EVO2A-0316-FEM connectors are compatible with the MC4-EVO2-MAL1 connectors. Supplier Part No: 32.0316P0001 Weight: 0.013 kg

Read more less

Part No: MC4-5M-1 Cables - Pre Terminated Cables Snap-in lock     Supplier Part No: 32.0026-50021 Weight: 0.29 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: SOL-S1-W4G-ST-S5-4P-S Display - Web Interfaces SOL-S1-W4G-ST (With SIM) (4-pin)         Solis S1 WIFI + 4G Cellular Stick, SolisCloud ready, With 5 yearSIM, 4 pin for all S5 inverters and below. Solis Data Loggers Features:  Support WiFi and 4G communication Status indicator, easy to display working status RESET button, one key to send data, convenient debugging Fault alarm, real-time monitoring Support Bluetooth nearby connection and debugging

Read more less

The handle can be padlocked into the off position, meaning that if work needs to be done to the inverter, the DC supply can be safely and securely isolated. Rated insulation voltage: 600V Rated current: 25A Number of DC poles: 2 5 year warranty NEMA 4X and IP66 rated Box Dimensions: 180mm x 98mm x 107mm Product SI25-PEL64R-2

Read more less

Part No: S440-MC4 Inverters - Optimisers Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%)   Supplier Part No: S440-1GM4MRM Weight: 0.8 kg Min PPT Voltage: 8 V Max PPT Voltage: 60 V DC Startup Voltage: 8 V DC Shutdown Voltage: 8 V Max Input Voltage: 60 V Max DC Power: 440 W Max AC Power (5 Minutes): 0 W Surge AC Power (1 Second): 0 W Max DC Current: 14.5 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 98.6 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years

Read more less

Part No: TIGO-TAP Display - Plant Communications Tigo TAP utilises ‘mesh’ technology which allows each Tigo TS4 optimiser to act as a repeater, extending the range of TAP.  The signal and data can hop from TS4 to TS4 along many different paths. As long as the TS4 optimisers are not more than 10m from each other, the TAP total range including ‘hops’ is 35m.     For details on differences between Gateway and TAP please follow the link to Tigo website.  Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication   Supplier Part No: 158-00000-02 Weight: 0.23 kg

Read more less

4G Export CT Clamp from Solis with a 10m Cable Manufacturer        Solis Accessory Product Type         CT Clamps Commodity Code         85045000 Dimensions (mm) (H x W x D)100 x 75 x 75

Read more less

The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.

Read more less

Field-Wireable Connectors   Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types   Supplier Part No:Q-CONN-R-10M Weight:0.05 kg

Read more less

Part No: PEAS69-EL32R-4 Switches - AC Isolators PEAS69-EL Enclosure AC Isolator 32A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification   Supplier Part No: PEAS69-EL32R-4 Weight: 0.4 kg Rated Power: 7,360 W Poles: 4 Max Cable: 10 mm2 Max Voltage: 240 V Rated Current: 32 A Rated Voltage: 230 V

Read more less

Part No: SOL-S1-W4G-ST-S5-4P Display - Web Interfaces SOL-S1-W4G-ST (Without SIM) (4-pin)           Solis S1 WIFI + 4G Cellular Stick, SolisCloudready, With no SIM, 4 pin for all S5 inverters and below Solis Data Loggers Features:  Support WiFi and 4G communication Status indicator, easy to display working status RESET button, one key to send data, convenient debugging Fault alarm, real-time monitoring Support Bluetooth nearby connection and debugging

Read more less

IMO offers a range of DC isolators designed for use in Solar PV Installations. The IMO design features an advanced switching action where the handle triggers a spring to snap the contacts rapidly. The disconnection of the load circuits and the suppression of the arc produced by a constant DC load is normally extinguished within 3ms. The handle can be padlocked into the off position, meaning that if work needs to be done to the inverter, the DC supply can be safely and securely isolated. Rated insulation voltage: 600V Rated current: 55A Number of DC poles: 2 5 year warranty NEMA 4X and IP66 rated Box Dimensions: 180mm x 98mm x 107mm Product SI55-PEL64R-2

Read more less

This part is made up of the following items: 1 x BIRD-MESH-BLK PVC Coated Solar Mesh Bird Deterrent - 30m roll   100 x EG-FASTEN-CLIP-B SolarGuard Spike Fixing Clip 30mm - Black   Package Including 30m Solar Panel Bird Exclusion Mesh and 100 30mm Fixing Clips.  Galvanized mesh to prevent bird nesting  30 Meter roll PVC Coated Galvanised Welded Mesh 25 mm X 12.5mm openings on a 200mm X 30m roll This mesh is the correct size to fit our solar panel mesh clips (WM132) Handy 200mm wide roll, saves time and cost in cutting down wider rolls of mesh The solar panel mesh clip holds the weld mesh securely against the solar panel to deter bird entry Manufactured from: 16 gauge / 1.5  mm diameter hot dipped galvanised wire then pvc coated in black These brand new and revolutionary clips make applying solar panel proofing spikes quicker and easier than ever!  These clips simply clip on to the side of the solar panel frame and hold the spike system securely in place.

Read more less

This part is made up of the following items: 2 x MC4-EVO2A-0316-FEM MC4-Evo2A 1500V DC Female Connector 0316 Small - Single   2 x MC4-EVO2A-0317-MAL MC4-Evo2A 1500V DC Male Connector 0317 Small - Single   The MC4-Evo2 is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus. 1xMale, 1xFemale. Approved for 1500 V DC (IEC) Rated current: 45A 4mm2 and 53A 6mm2 cables MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68)

Read more less

Part No: SE-SBI-1PH Storage Systems - Accessory SolarEdge Home Backup Interface Single Phase  BI-EU1P - SE-SBI-1PH Flexible Backup Interface Automatically provides backup power to home loads in the event of grid interruption. Flexibility in which loads to back up - the entire home or selected loads. Scalable solution to support higher power & higher capacity. Seamless integration with the SolarEdge Home Hub Inverter to manage and monitor both PV generation and energy storage.   Supplier Part No: BI-NEUNU-1P-01 Weight: 5 kg

Read more less

Part No: SE-AC-SPD-I Protection - Three Phase Surge Protections - Protects two RS485 buses from electrical surges, such as lightning - Easy connection to each RS485 terminmal block in the inverter - Compatible with SolarEdge three phase inverters with SetApp configuration - Can easily be added to existing installations without having to redo the RS485 wiring   Supplier Part No: SE-AC-SPD-I Weight: 0.23 kg

Read more less

Part No: SE-FLRSTD-4.6 Storage Systems - Battery Rack Floor stand kit for SolarEdge Energy Bank (SE-BATTERY-4.6KWH) to allow floor mounting of the battery.   Supplier Part No: IAC-RBAT-5KFSTD-01 Weight: 18 kg

Read more less

Part No: MYEN-EDDI-RLYBD Accessories - Immersion Controllers eddi has the option to install a Relay & Sensor board which allows for many different wiring configurations and includes the following features:   Two independent multi-function relays (16Amp) eSense input (isolated 230V detection for low tariff etc.) Two temperature sensor inputs (PT1000)   The two relays can be independently set for several different functions, or they can be set to operate as a pair. The relay functions include:   – Export Threshold – Import Threshold – Operate when heating – De-stratification pump control – Timed operation – Fault signal for BMS systems   Please refer to the eddi manual for fitting diagrams.   Supplier Part No:MYEN-EDDI-RLYBD Weight:0.5 kg

Read more less

Part No: SOLAX-WIFI-3.0 Display - Web Interfaces Enhance your SolaX installation by connecting it to the SolaX Cloud. This Black WiFI dongle V3 allows an wireless connection to be made to the Internet router. This is ideal when running a cable isn't possible. One dongle is needed per SolaX inverter.    Supplier Part No: SOLAX WIFI 3.0 Weight: 0.2 kg

Read more less

Part No: GIV-LORA Display - Energy Meter LoRa data transmission terminals universal communication interface equipment. Allows for wireless transmission of RS485 data, cutting out the need for running long cables in complex installs.  The system integrates two industrial standard RS485 interfaces and supports a variety of protocols to realise reliable data transmission between wired and wireless devices. Includes a pair of communicators (transmitter and receiver).   Set as Channel 0  Key features: Small, easy to install Long-range, up to 8km barrier free Operating temperature range: -20 to 70 oC  Please note: This device is not suitable for systems being installed under G100    Supplier Part No:GIV-LORA Weight:1 kg

Read more less

The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.

Read more less

The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.

Read more less

SDM120D meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D - single direction range, work directly connected to a maximum load 45A AC circuit.  This SDM120DB version comes with a backlight making it easier to take readings  Active Energy Measured 45A Direct Connection Pulse Output 1 Module Wide 35mm Din Rail Mounting Measurements: H - 119mm W - 17.5mm D - 62mm Warning: This is a DIN rail mounted meter and will need to be housed in a DIN rail enclosure   Supplier Part No: SDM120DB Weight: 0.081 kg

Read more less

  Roof Hazard Label Fragile Roof Hazard  Fragile Roof Hazard Symbol Sign will help let anyone know that the roof is fragile and that they should stick to designated movement areas while working up there. This will aid their safety as well as those below.   Features:  Complies to ISO7010 Technical: Self-adhesive, thick and durable polyolefin material      Keywords: Portafix, Labels, Hazard Label, warning stickers   Supplier Part No: MG04393 Weight: 0.002 kg

Read more less

Everything you need to treat 30m of solar panels which is a typical household (4kw array/16 panel array layout) Includes one roll of black PVC coated hot dipped galvanised steel wire mesh, 60 solar mesh clips, stainless steel corner ties and cutting tool Keeps pigeons out from under solar panels on pitched roofs Does not pierce roof or solar panel ensuring no leaks or the risk of warranty issues with panels Fast and easy to install, no gluing or drilling necessary

Read more less

30m Solar Panel Bird Exclusion Mesh Galvanized Mesh To Prevent Bird Nesting  30 Meter roll PVC Coated Galvanised Welded Mesh 25 mm X 12.5mm openings on a 200mm X 30m roll This mesh is the correct size to fit our solar panel mesh clips (WM132) Handy 200mm wide roll, saves time and cost in cutting down wider rolls of mesh The solar panel mesh clip holds the weld mesh securely against the solar panel to deter bird entry Manufactured from: 16 gauge / 1.5  mm diameter hot dipped galvanised wire then pvc coated in black

Read more less

String-level rapid shutdown device with 1~2 strings Ensure the safety and reliability of your photovoltaic installations with the PEFS Rapid Shutdown. Specially designed as a critical safety device, this cutting-edge solution offers peace of mind in emergency situations. In the event of an emergency, such as a fire outbreak, the DC disconnect switch becomes your first line of defense. This switch is strategically engineered to swiftly disconnect connected strings of the installation, mitigating potential hazards and containing risks. Key Features: Enhanced safety for DC photovoltaic installations Swift disconnection of connected strings during emergencies Robust enclosure built to withstand dust and moisture (IP66) Automatic switch-off during AC power interruptions exceeding five seconds Automatic switch-on upon AC power restoration longer than five seconds

Read more less

B70-051 WEATHER-RESISTANT:  Protect outdoor installed units such as Inverters or Batteries from glaring sun and light-medium rain,   UV RESISTANT: Shields outdoor unit against harmful rays and glaring sun thanks to the surface coating. SIMPLE DESIGN: Suitable for all home and outdoors area main unit installations ACCESSORIES INCLUDED: All necessary hardware included. For fitting on cement walls only. DIMENSIONS: 23H x 200L x 80Wcm. Wall bracket: 23H x 75Lcm. Supplier Part No: B70-051 Weight:3 kg

Read more less

PV-Ultra is a durable cable specifically crafted for DC interconnections within solar photovoltaic systems. With outstanding mechanical properties, it can be installed both internally and externally. Constructed from high-quality materials, it boasts an expected lifespan of approximately 25 years. The cables are designed to operate at a maximum conductor temperature of 90°C, with a permissible maximum conductor temperature of 120°C for up to 20,000 hours, under a maximum ambient temperature of 90°C. Features and Benefits Easier to handle and identify Saves installation costs and installation time Easier to route along/through buildings or walls Gives a cleaner, neater installation Safer as it removes the need for junction boxes Safer as it looks like a power cable to reduces the risk of accidental damage Pre-marked ‘LIVE DC’ warning message to improve safety

Read more less

GIV-SME-AIO-ID The Commercial All-In-One (AIO) comprises of a 69kWh battery system with a 30kW high frequency PCS (Inverter) built in within a cabinet creating a small to medium enterprise energy storage system. The commercial All in One is GivEnergy's most compact, cost-effective commercial battery storage solution. So, your energy needs are met with a single, sleek piece of kit. The 30kW 69kWh Commercial All-In One Inverter is scalabale from 1 to 6 units with a max size of 180kW and 207kWh. Features: Out-of-the-box convenience - Comes to you as a ready-to-go, turnkey solution that can be quickly and easily installed on site using plug and play battery packs. A true cost and space saver - By integrating all needed components into a single unit, the system represents maximum value, at a minimal size and price. Built-in safety - Every practical protection has been built-in to the system. It’s reliable, rock-solid, and rigorously safety-checked. Simple & user-friendly - Effortless operation, simple plug and play installation, plus easy cloud control. There’s no simpler way to get started with commercial battery storage. 10 Year Warranty   Battery Information Battery Voltage 600-790V Battery Capacity 69kWh Max DoD 90% Communication LAN/WiFi Modbus CANbus AC attributes Rated power: 30kW Rated current: 44A Number of phases: 3 System Max efficiency 98.8% IP rating IP20 Weight 950kg +/-2% Dimensions 2050 x 600 x 800mm

Read more less

This part is made up of the following items: 1 x FE-HV-EP5 Fox ESS EP5 5.18kWh Battery   1 x FE-H1-5.0-G2 Fox H1 5.0kW Hybrid Inverter G2     Weight: 72.5 kg

Read more less

Part No: EN-S-WB-230-UK Inverters - Micro Inverter Gateway The Enphase Envoy-S Standard communications gateway delivers solar production data to Enphase Enlighten monitoring and analysis software for comprehensive, remote maintenance and management of the Enphase System. With multiple powering and connection options, Envoy-S Standard allows for greatest installation flexibility.    All Enphase systems must be connected to the internet and registered within 45 consecutive days following the warranty start date in order to be covered. Please note due to shortage of Envoy S Standard units, you might receive a Metered version with CTs and without UK plug. The functionality of product is exactly the same, but the unit will need to be hardwired.   Supplier Part No: ENV-S-WB-230 Weight: 1.07 kg

Read more less

Part No: EN-Q-TERM-R Accessories - Cable termination caps Enphase round Q Cable Terminator cap for unused cable ends - required to terminate each circuit.  Single item only.   Supplier Part No:EN-Q-TERM-R Weight:0.025 kg

Read more less

Part No: MC4-5M-2 Cables - Pre Terminated Cables Keywords: MC4 10M2, 1xMale, 1xFemale each cable, MC4. Stäubli, PV Cable, Pre Terminated Cable Please note: 6mm cable may be substituted at the 4mm price when 4mm cable is out of stock.   A mix of 4 and 6mm will be provided   Supplier Part No: 100038568 Items in this pack: 2 Weight: 0.58 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Supplier code:32.0014P0001 Female cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm² Rated current: 39 A (for 4 and 6mm2 cable) Please use correct MC4 approved tools to crimp these connectors on to bare cables. 

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also available via your smartphone or web portal.   Supplier Part No:4G/GPRS Dongle Weight:0.14 kg

Read more less

Part No: EN-Q-DISC Tools - Accessories Enphase Cable disconnect tool for Q Cable connectors, DC connectors and AC module mount. Single item only.    Supplier Part No:Q-DISC-10 Weight:0.01 kg

Read more less

Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack.  Supplier Part No: Battery Cable Pack Long for Sunsynk Weight: 1 kg

Read more less

Part No: KG20B-T106D Switches - DC Isolators Kraus & Naimer DC Switch Switch - Disconnectors, 2 pole - for single string             IP66/67 Protection             Black/Grey Padlockable Handle – lockable in the OFF-position             Class II compliant, Grey Insulated Enclosure             Switch Interlocked with lid to prevent opening in “ON” position               Rated for use in ambient temperatures of 50°C Plastic Enclosures, Protection IP66/67, totally insulated, M20/M25 knock-outs Handle black, Plate Backing grey Contact development: 2 pole, 6 contacts per circuit (2 x 3 in series) Dimensions (w x h x d): 100mm x 178mm X 93mm Keywords: 9, 9kW, KG20BT106D, Kraus & Naimer, Switches, DC Isolator, DC ISOLATER, dc isolaters, isolaters UK Please note: We will have reduced availbility of K&N switch gear for the immediate future. We have sourced alternative options for this period of low stock, please contact your account manager for more information.   Supplier Part No:KG20B T106/D-P003 KL11V Weight:0.68 kg Rated Power:9,600 W Poles:2 Max Cable:6 mm2 Max Voltage:1,000 V Rated Current:21 A Rated Voltage:800 V Rated Current:20 A Rated Voltage:1000 V

Read more less

Part No: KG64-T203-GBA270 Switches - AC Isolators Kraus & Naimer AC Switch Suitable for single phase AC connection. Plastic enclosures, IP66/67 protection, totally insulated, 4x 20/25mm dual knock-outs Handle red with yellow backing plate, padlockable in the OFF position Dimensions (w x h x d): 100mm x 190mm x 93mm Switch interlocked with lid to prevent opening in ‘ON’ position Keywords: 14kW, KG64T203GBA270, Kraus & Naimer, Switches, AC Isolator   Supplier Part No:KG64 T203/GBA270 *KL1V Weight:0.625 kg Rated Power:14,720 W Poles:3 Max Cable:16 mm2 Max Voltage:230 V Rated Current:64 A Rated Voltage:230 V

Read more less

  IMO offers a range of DC isolators designed for use in Solar PV Installations. The IMO design features an advanced switching action where the handle triggers a spring to snap the contacts rapidly. The disconnection of the load circuits and the suppression of the arc produced by a constant DC load is normally extinguished within 3ms. The handle can be padlocked into the off position, meaning that if work needs to be done to the inverter, the DC supply can be safely and securely isolated. Rated insulation voltage: 600V Rated current: 32A Number of DC poles: 4 5 year warranty NEMA 4X and IP66 rated Box Dimensions: 180mm x 98mm x 107mm Product SI32-PEL64R-4

Read more less

Part No: CT300-48B-100 AC Components - AC Accessories Plastic cable tie Black CT300/48B 300mm x 4.8mm Pack of 100.   Supplier Part No:CT300-4.8B Items in this pack:100 Weight:0.206 kg

Read more less

Part No: MC4-SPAN-MET Tools - Accessories Assembly and unlocking tool, incl. belt pouch (consisting of 2 open-end spanners), metalMC4SPAN, Stäubli, Tools, Accessory   Supplier Part No: 32.6058 Weight: 0.3 kg

Read more less

Part No: MC4-CAP-MALE Cables - Accessories Snap-in lock   Supplier Part No: 32.0716 Weight: 0.019 kg

Read more less

Part No: MC4-CAP-FEMALE Cables - Accessories Snap-in lock Supplier Part No: 32.0717 Weight: 0.005 kg

Read more less