Sunsynk Batteries

Details INSTALLERS - ENSURE ADEQUATE CABLING AND CIRCUIT PROTECTION IS CONSIDERED WHEN USING MULTIPLE BATTERIES.  NOTE - YOU CANNOT MIX BATTERY TYPES. WARNING NOTE - You cannot mix Sunsynk G5.3, BYD, CATL, IP20 or IP65 batteries in the same system.  

Read more less

It's engineered to operate in temperatures as low as -10°C and with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces.Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LifePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 340kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 610mm (W) x 760mm (H) x 200mm (D) Weight: 105kg

Read more less

Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack It has 100% DoD, with 5.12kW max discharge power, a long-life span with a standard 5-year product warranty. Additional features:  Up to 16 units with the same firmware can be paralleled  IP rating 40  Self-monitoring function to detect abnormalities  Excellent thermal stability  Brackets not included; use these - SUN-WALL-BR Please note: These batteries contain CATL cells and are not intercompatible    Supplier Part No: Sunsynk CATL Battery LFP 5.12kWh Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W

Read more less

It's engineered to operate in temperatures as low as -10°C and with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces.Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LifePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 340kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 610mm (W) x 760mm (H) x 200mm (D) Weight: 105kg

Read more less

Part No: SUN-HV-5.12-BATT Storage Systems - Li-ion Battery Pack Please note that this is a singular part, please use SUN-HV-61.44 or SUN-HV-20.48 Supplier Part No: HV 5.12kWh Battery (Black) Weight: 44 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5120 W Maximum Discharge Rate (5 Minutes): 5120 W Surge Discharge Rate (15 Seconds): 5120 W Maximum Charge Rate (5 Minutes): 5120 W

Read more less

Part No: SUN-HV-61.44 Storage Systems - Li-ion Battery Pack Sunsynk High Voltage 61.44kWh Complete Storage System Weight: 572 kg Battery Type: Lithium Ion Nominal Energy: 61440 Wh Depth of discharge: 100.00 % Voltage: 6144 V Continuous Discharge Rate (Normal Use): 61440 W Maximum Discharge Rate (5 Minutes): 61440 W Surge Discharge Rate (15 Seconds): 61440 W Maximum Charge Rate (5 Minutes): 61440 W

Read more less

Part No: LIFE-3.6-HYB02 Storage Systems - Hybrid Inverter Sunsynk LifeLynk X   

Read more less

Details An essential part of an electrical distribution system, the Sunsynk busbar helps ensure a smooth flow of electricity between various components such as circuit breakers, transformers and electrical panels.  Its robust ABS outer casing makes for a long-lasting product, while its scalable setup means you can connect multiple busbars to increase capacity. Key features: Electrical distribution component with positive and negative busbars Offers four connections for batteries, loads or chargers, plus a ground connection Conducts electricity between different components such as circuit breakers, transformers and electrical panels Capacity is expandable by connecting to further busbars Durable ABS casing enclosing tinned copper busbar (8m x 30mm) Ingress protection rating: IP22 Voltage range: 9-60V DC Current rating: 800A Dimensions: 165mm (H) x 245mm (W) x 75mm (D) Weight: 1.8kg

Read more less

Details The Sunsynk W10.6 battery is a high-performance energy storage solution that allows you to maximise the clean solar energy you generate through your PV system. It offers up to 10.64kWh of energy but if you need more, it's also scalable by using up to 32 together for a maximum of 340kWh. It's engineered to charge in temperatures as low as -10°C, and discharge as low as -20°C. Plus, with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces. Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LiFePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 340kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 610mm (W) x 760mm (H) x 200mm (D) Weight: 105kg

Read more less

Details The Sunsynk W5.3 battery is a high-performance energy storage solution that allows you to maximise the clean solar energy you generate through your PV system. It offers up to 5.32kWh of energy but if you need more, it's also scalable by using up to 32 together for a maximum of 170kWh. It's engineered to operate in temperatures as low as -10°C and with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces. Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LifePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 170kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 440mm (W) x 620mm (H) x 135mm (D) Weight: 46kg 10-year warranty

Read more less

Details Built for large-scale grid-connected systems, the Sunsynk 100kW three-phase string inverter is specially designed for solar conversion in commercial installations. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for large commercial installations Six MPPTs with four strings per tracker Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.8% Ingress protection: IP65 Dimensions: 824mm (W) x 516mm (H) x 312.7mm (D) Weight: 81kg Five-year standard warranty

Read more less

Details Built for large-scale grid-connected systems, the Sunsynk 80kW three-phase string inverter is specially designed for solar conversion in commercial installations. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for large commercial installations Four MPPTs with four strings per tracker Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.7% Ingress protection: IP65 Dimensions: 700mm (W) x 575mm (H) x 297mm (D) Weight: 60kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 50kW three-phase string inverter is specially designed for solar conversion in commercial properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Four MPPTs with three strings per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.7% Ingress protection: IP65 Dimensions: 434mm (W) x 570mm (H) x 243mm (D) Weight: 39kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 25kW three-phase string inverter is specially designed for solar conversion in commercial and larger residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Two MPPTs with two strings per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.5% Ingress protection: IP65 Dimensions: 362mm (W) x 527mm (H) x 220mm (D) Weight: 20kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 15kW three-phase string inverter is specially designed for solar conversion in commercial and larger residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Two MPPTs with one string per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.5% Ingress protection: IP65 Dimensions: 283mm (W) x 463mm (H) x 178mm (D) Weight: 11kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 10kW three-phase string inverter is specially designed for solar conversion in commercial and larger residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Two MPPTs with one string per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.3% Ingress protection: IP65 Dimensions: 283mm (W) x 463mm (H) x 178mm (D) Weight: 11kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 5kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for residential installations Two MPPTs with one string per tracker Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 305mm (W) x 280mm (H) x 180mm (D) Weight: 7.7kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 3.6kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for residential installations Two MPPTs with one string per tracker Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 305mm (W) x 280mm (H) x 180mm (D) Weight: 7.7kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 2.5kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: Single-MPPT string inverter designed for residential installations Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 280mm (W) x 310mm (H) x 184mm (D) Weight: 5.4kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 1.5kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: Single-MPPT string inverter designed for residential installations Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 280mm (W) x 310mm (H) x 184mm (D) Weight: 5.4kg Five-year standard warranty

Read more less

Details Designed for industrial and commercial applications, the Sunsynk 50kW three-phase hybrid inverter offers superb power management and high efficiency. With remote monitoring capabilities through the dedicated Sunsynk Connect app, you can track the efficiency of your system on-the-go, helping you to stay ahead of potential issues to ensure optimal performance. Built for easy installation and maintenance, this three-phase solar inverter will seamlessly integrate into your world to reduce costs, and provide reliable, renewable energy. Manage power flow from multiple sources such as solar, mains power (grid) and generators, and effectively store and release power, as and when utilities require. Key features: Easy-to-understand display with visual power flow screen Supports Wi-Fi monitoring and two strings for one MPP tracker and one string for another Smart-settable three-stage MPPT charging to optimise battery performance Programmable multiple operation modes: on-grid, off-grid and UPS Fully programmable controller and supply priority for battery or grid Works with lithium-ion batteries, including high-voltage batteries DC- and AC-coupled to retrofit to an existing solar system Limiting function to prevent excess power overflow to grid Protection against overload, over-temperature and short-circuit Dimensions: 527mm (W) × 894mm (H) × 294mm (D) Weight: 100.5kg Ingress protection: IP65 Five-year warranty

Read more less

Details The Sunsynk 25kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 25000W. This three-phase solar inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

Details The Sunsynk 20kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 20000W. This three-phase solar inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 8kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 7kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 5kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 3.6kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 8kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 7kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 5kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 3.6kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Reliable and flexible, the Sunsynk 12kW single-phase hybrid inverter is ideal for managing your home's power supply. This powerful inverter is capable of working with lithium-ion and lead-acid batteries to form an efficient energy system. It's perfect for outdoor installation thanks to its IP65 rating for ingress protection, and can be mounted on a wall wherever's convenient. With plenty of inbuilt safety features such as anti-islanding and overvoltage protection, this hybrid inverter is a dependable option for those looking to take control of their home energy supply. Key features: Hybrid inverter designed for home solar installations Three MPPTs with two strings per MPPT Easy-to-understand display Compatible with lithium-ion and lead-acid batteries Integrated safety functions such as arc fault detection, anti-islanding protection and surge protection Intelligent air cooling Compatible with wall mounting Ingress protection: IP65 Dimensions: 420mm (W) x 670mm (H) x 233mm (D) Weight: 42kg Five-year standard warranty

Read more less

The Sunsynk 12kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 12000W. This three-phase solar inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 422mm (W) x 702mm (H) x 281mm (D) Weight: 47.5kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

The Sunsynk 10kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 10000W. This three-phase solar inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 422mm (W) x 702mm (H) x 281mm (D) Weight: 47.5kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

Reliable and flexible, the Sunsynk 10kW single-phase hybrid inverter is ideal for managing your home's power supply. This powerful inverter is capable of working with lithium-ion and lead-acid batteries to form an efficient energy system. It's perfect for outdoor installation thanks to its IP65 rating for ingress protection, and can be mounted on a wall wherever's convenient. With plenty of inbuilt safety features such as anti-islanding and overvoltage protection, this hybrid inverter is a dependable option for those looking to take control of their home energy supply. Key features: Hybrid inverter designed for home solar installations Three MPPTs with two strings per MPPT Easy-to-understand display Compatible with lithium-ion and lead-acid batteries Integrated safety functions such as arc fault detection, anti-islanding protection and surge protection Intelligent air cooling Compatible with wall mounting Ingress protection: IP65 Dimensions: 420mm (W) x 670mm (H) x 233mm (D) Weight: 42kg Five-year standard warranty

Read more less

The Sunsynk 8kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 8000W. This three-phase solar inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 422mm (W) x 702mm (H) x 281mm (D) Weight: 47.5kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

Looking for a reliable and flexible inverter for your solar energy system? Check out the Sunsynk 3.6kW ECCO hybrid inverter. This powerful inverter is capable of working with lithium-ion and lead-acid batteries to form an efficient energy system. With fully programmable power export capability, this Sunsynk inverter allows you to manage your power exports according to your needs. Additionally, the inverter is flexible and can be switched automatically from grid-tied to off-grid mode, making it a perfect solution for various energy needs. Need more power? No problem! Up to 16 units with the same firmware can be paralleled, making it easy to expand your system and meet your growing power needs. The Sunsynk inverter is also suitable for outdoor installation, thanks to its IP65 rating. With a dual-MPPT design and anti-islanding protection, the Sunsynk 3.6kW ECCO hybrid inverter is a reliable and efficient choice for anyone looking to harness the power of the sun. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Fully programmable power export Automatic switching from grid-tied to off-grid mode Up to 16 units with the same firmware can be paralleled Two MPPT inputs Protection against power overload, over-temperature and short-circuit Anti-islanding protection for safety Dimensions: 330mm (W) x 433mm (H) x 238mm (D) Weight: 14.6kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

Details Make messy wiring and complicated installations things of the past with the Sunsynk Elite hybrid inverter. Its simple, modular design means it's easy to install and is expandable as your power needs grow in the future. Together with the 5.1kWh battery, power distribution unit and base, this single-phase inverter forms an all-in-one power solution to make sure you have everything you need to power your home or business. With handy features such as self-consumption and feed-in to the grid, auto-restart while the AC is recovering, and multiple programmable settings, the Sunsynk Elite hybrid inverter works hard to make sure all your power needs are met. Meanwhile, several safety features including reverse polarity, thermal and anti-islanding protection keep your property and your investment safe and sound. Key features: Single-phase hybrid inverter for use with the Sunsynk Elite battery and power distribution unit to create an all-in-one system Simple, stackable design Modular design means battery capacity is expandable up to six batteries Two MPPTs with one string per tracker Self-consumption and feed-in to grid Auto restart while AC recovers Programmable priority for battery or grid supply Multiple operation modes: on-grid, off-grid and uninterruptible power supply (UPS) Compatible with mains voltage or generator power supply Time-of-use and smart load functions Multiple safety features including over-current, over-voltage and short circuit protection LCD and LED display Intelligent air cooling Maximum efficiency: 97.6% Ingress protection rating: IP65 Dimensions: 720mm (W) x 399.2mm (H) x 256mm (D) (excluding connectors and brackets) Weight: 31.6kg 10-year warranty  

Read more less

Details Make messy wiring and complicated installations things of the past with the Sunsynk Elite hybrid inverter. Its simple, modular design means it's easy to install and is expandable as your power needs grow in the future. Together with the 5.1kWh battery, power distribution unit and base, this single-phase inverter forms an all-in-one power solution to make sure you have everything you need to power your home or business. With handy features such as self-consumption and feed-in to the grid, auto-restart while the AC is recovering, and multiple programmable settings, the Sunsynk Elite hybrid inverter works hard to make sure all your power needs are met. Meanwhile, several safety features including reverse polarity, thermal and anti-islanding protection keep your property and your investment safe and sound. Key features: Single-phase hybrid inverter for use with the Sunsynk Elite battery and power distribution unit to create an all-in-one system Simple, stackable design Modular design means battery capacity is expandable up to six batteries Two MPPTs with one string per tracker Self-consumption and feed-in to grid Auto restart while AC recovers Programmable priority for battery or grid supply Multiple operation modes: on-grid, off-grid and uninterruptible power supply (UPS) Compatible with mains voltage or generator power supply Time-of-use and smart load functions Multiple safety features including over-current, over-voltage and short circuit protection LCD and LED display Intelligent air cooling Maximum efficiency: 97.6% Ingress protection rating: IP65 Dimensions: 720mm (W) x 399.2mm (H) x 256mm (D) (excluding connectors and brackets) Weight: 31.6kg 10-year warranty  

Read more less

Details Make messy wiring and complicated installations things of the past with the Sunsynk Elite hybrid inverter. Its simple, modular design means it's easy to install and is expandable as your power needs grow in the future. Together with the 5.1kWh battery, power distribution unit and base, this single-phase inverter forms an all-in-one power solution to make sure you have everything you need to power your home or business. With handy features such as self-consumption and feed-in to the grid, auto-restart while the AC is recovering, and multiple programmable settings, the Sunsynk Elite hybrid inverter works hard to make sure all your power needs are met. Meanwhile, several safety features including reverse polarity, thermal and anti-islanding protection keep your property and your investment safe and sound. Key features: Single-phase hybrid inverter for use with the Sunsynk Elite battery and power distribution unit to create an all-in-one system Simple, stackable design Modular design means battery capacity is expandable up to six batteries Two MPPTs with one string per tracker Self-consumption and feed-in to grid Auto restart while AC recovers Programmable priority for battery or grid supply Multiple operation modes: on-grid, off-grid and uninterruptible power supply (UPS) Compatible with mains voltage or generator power supply Time-of-use and smart load functions Multiple safety features including over-current, over-voltage and short circuit protection LCD and LED display Intelligent air cooling Maximum efficiency: 97.6% Ingress protection rating: IP65 Dimensions: 720mm (W) x 399.2mm (H) x 256mm (D) (excluding connectors and brackets) Weight: 31.6kg 10-year warranty  

Read more less

This power distribution unit or battery management system is designed to be used as part of the Sunsynk Elite energy storage system alongside the Elite hybrid inverter of your choice and the 5.1kWh solar battery. It helps ensure you have everything you need to make the most of the power captured by your solar installation. Key features: Battery management system for use with the Sunsynk Elite hybrid inverter and battery Pack also includes the battery base Ingress protection rating: IP65 Dimensions: 720mm (W) x 228mm (H) x 255mm (D) Weight: 15kg 10-year warranty

Read more less

Make messy wiring and complicated installations things of the past with the Sunsynk Elite battery storage. Its simple, modular design means it's easy to install and is expandable as your power needs grow in the future. Together with your choice of hybrid inverter, power distribution unit and base, this solar battery forms an all-in-one power solution to make sure you have everything you need to power your home or business. With handy features such as self-consumption and feed-in to the grid, auto-restart while the AC is recovering, and multiple programmable settings, the Sunsynk Elite battery storage works hard to make sure all your power needs are met. Meanwhile, several safety features including reverse polarity, thermal and anti-islanding protection keep your property and your investment safe and sound. Key features: Solar battery storage for use with the Sunsynk Elite single-phase hybrid inverter and power distribution unit to create an all-in-one system LiFePO4 battery technology Simple, stackable design Modular design means battery capacity is expandable up to six batteries Self-consumption and feed-in to grid Auto restart while AC recovers Programmable priority for battery or grid supply Multiple operation modes: on-grid, off-grid and uninterruptible power supply (UPS) Compatible with mains voltage or generator power supply Time-of-use and smart load functions Multiple safety features including over-current, over-voltage and short circuit protection Intelligent air cooling Ingress protection rating: IP65 Dimensions: 720mm (W) x 300 (H)mm x 255mm (D) (excluding connectors and brackets) Weight: 55kg 10-year warranty

Read more less

Part No: SUN-HV-20.48-BATTRACK-DOOR Storage Systems - Battery Cabinet

Read more less

Part No: SUN-HV-20.48 Storage Systems - Li-ion Battery Pack  

Read more less

Part No: SUN-3PH-100K-BATT-245.76 Storage Systems - Storage Package  

Read more less

Part No: SUN-3PH-50K-BATT-122.88 Storage Systems - Storage Package Sunsynk High Voltage Storage Package 50kW 3PH Hybrid Inverter with 122.88kWh Battery  

Read more less

Part No: SUN-3PH-50K-BATT-20.48 Storage Systems - Storage Package  

Read more less

Part No: SUN-3PH-50K-BATT-40.96 Storage Systems - Storage Package

Read more less