Search results for "myenergi"

Unique PowerAssist featureThe MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.Uninterrupted AC power (UPS function)In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.Remote Monitoring and ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a back up generator and more…

Read more less

Sealed (VRLA) AGM Batteries AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries.   Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.   Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.   Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter.  All Prices Include VAT   Brand Victron Energy Manufacturer Part Number BAT212070084 GTIN 8719076036920 Voltage 12V Battery Capacity (C20) 8Ah Terminal Type Spade Terminal Layout Side Dimensions (Including Terminals) L151 x W65 x H101mm Weight 2.5Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Deep Cycle    2 YEAR WARRANTY  

Read more less

The Fogstar Energy 10kWh Battery is a high-density energy storage system engineered for demanding residential and light-commercial applications where performance, safety and environmental resilience are non-negotiable. Designed around a 200A intelligent Battery Management System, it provides active monitoring and control of voltage, current and temperature at cell level, ensuring stable charge and discharge behaviour across every cycle. Integrated low-temperature heating enables safe and efficient charging in cold environments, maintaining performance and extending service life in UK conditions. Safety is built in; the battery features an automatic fire suppression system and is housed in a fully sealed IP67 enclosure, protecting internal components against water ingress, dust and external contaminants. This makes it suitable for long-term indoor or outdoor installation. Optimised for off-grid systems, home backup power and renewable energy integration, the Fogstar Energy 10kWh delivers consistent output, high cycle efficiency and dependable operation in mission-critical energy storage applications. Key Features Advanced Battery Management SystemThe 200A BMS delivers precise control, enhanced protection and long-term performance. Simple Integration with all Major Inverter BrandsThe BMS seamlessly integrates with a wide range of popular inverters, containing pre-loaded protocols for popular inverter brands such as Victron, Luxpower, Sunsynk, Solis, Voltacon and many more. IP67-Rated ConstructionFully sealed enclosure protects against dust, moisture and harsh installation environments. Integrated Fire SuppressionAutomatic heat-activated aerosol system provides rapid response protection inside the battery. User-Friendly InterfaceLCD touchscreen for real-time monitoring and system management. Built-in BreakerThe 250A breaker allows the battery to be safely isolated during faults, maintenance, or emergency conditions. Cold-Weather ReadyBuilt-in heating system enables safe charging at low temperatures and reliable operation down to –20°C. High Output Performance200Ah capacity with up to 200A discharge for high-demand inverters and whole-home backup. Long-Term Peace of MindBacked by a 6 year warranty and 10 years of customer service support. Low Cost Per kWhAn incredible £150 per kWh, delivering cost-effective energy storage without compromising on quality. Scalable Energy StorageUp to 16 batteries can be connected in parallel to expand energy storage capacity to suit your specific needs. Wall Mounting Brackets: Wall mounting brackets are included, allowing the battery to be securely fixed to both internal and external walls. Product Specifications Rated Energy: 10kWhModel: FE48-10Nominal Voltage (V): 51.2V (48V)Operating Voltage (V): 42V - 58.2VCycle Life: 6000 cycles at 91% DODCell Configuration: 2P16SWorking Temperature: 0 - 40°C Charge and -20°C - 40°C Discharge.Maximum Discharge Current: 200ACapacity: 200AhWeight: 98kgSize: 550mm (L) x 175mm (W) x 904mm (H) What's included? We supply a pair of 1.5m positive and negative power cables with Amphenol connectors, designed for reliable battery-to-battery linking in both single and parallel installations. For correct installation, always connect all negative conductors before attaching the positive. Included in the kit is a 1.5m RS485/CAN communication cable, enabling straightforward data integration with compatible inverters and system components. A 1.8m PC cable is also provided for direct connection during system setup, monitoring and diagnostics. Together, these accessories allow the battery to be integrated easily into both standalone and multi-unit configurations.

Read more less

Features Perfect chargers for any type of battery Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail. Suitable for AC and DC supply (AC-DC and DC-DC operation) Except for the 3-phase input models, the chargers also accept a DC supply. Controlled charging Every TG Charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes. Use of TG Chargers as a power supply As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available. Two outputs to charge 2 battery banks (24V models only) The TG Chargers feature 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery. To increase battery life: temperature compensation Every Skylla TG Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting. Battery voltage sense In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. Brand Victron Energy Manufacturer Part Number SDTG2400303 Voltage 24 Charger Current House Battery 30A Charger Current Starter Battery 4A Recommended Battery Capacity 150 – 300Ah Battery Connection M8 Studs Outputs 1+1 Temperature Sensor Yes Can Be Used As Power Supply Yes IP Rating IP21 Dimensions H365 x D250 x D147mm Weight (kg) 5.5 Warranty 5 Years

Read more less

The right amount of charge for a lead-acid battery: variable absorption time BatterySafe mode: preventing damage due to excessive gassing Storage mode: less maintenance and aging when the battery is not in use Smaller and lighter compared to similar models NMEA2000 Canbus connection PowerControl: set a maximum shore power Remote Control Li-ion (LiFePo4) ready  Features Rugged Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Flexible Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use. Please refer to the manual for a complete overview of the possibilities. Synchronised parallel operation Several chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Please see the manual for details. The right amount of charge for a lead-acid battery: variable absorption time When only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. Preventing damage due to excessive gassing: the BatterySafe mode If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-i will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. Less maintenance and aging when the battery is not in use: the Storage mode The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. To increase battery life: temperature compensation Every Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected. Battery voltage sense In order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. Suitable for AC and DC supply (AC-DC and DC-DC operation) The chargers also accept a DC supply. Use as a power supply As a result of the perfectly stabilized output voltage, the Skylla-i can be used as a power supply if batteries or large buffer capacitors are not available. Li-Ion (LiFePO4) ready Simple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port. Brand Victron Energy Manufacturer Part Number SKI024080002 Voltage 24 Charger Current House Battery 3 x 80A Charger Current Starter Battery N.A. Recommended Battery Capacity 400 – 800Ah Battery Connection M8 Bolts Outputs 3 Temperature Sensor Yes Can Be Used As Power Supply Yes IP Rating IP21 Dimensions H405 x W250 x D150mm Weight (kg) 7 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number SDRPCSV Frequency (Hz) 50/60 Dimensions L65 x W60 x D40mm Warranty 5 Years

Read more less

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature. In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds. After 2 attempts to reengage with 3 seconds delay, the delay increases to 10 minutes. Whenever battery voltage is less than 13,5 V (resp. 27 V or 54 V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5 V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7 V or more, the Cyrix will reengage, with 3 seconds delay. Brand Victron Energy Manufacturer Part Number CYR010230430 Voltage 12/24 Continuous current & Breaking capacity at 12V or 24V 230A Current Consumption When Open 4 mA Control Cable Included (Length 1 m) Yes LED Status Indication Yes Protection Category IP54 Dimensions H65 x W100 x D50mm Weight (kg) 0.27 Warranty 5 Years

Read more less

The LiFePO4 Battery 12.8V/150Ah NG is part of Victron Energy’s Next Generation battery lineup, designed to provide superior performance and durability. This 150Ah battery offers increased energy capacity while maintaining a compact design, making it ideal for a range of energy storage applications. With the flexibility to connect in series, parallel, or combined configurations, you can create robust battery banks supporting voltages of 12V, 24V, or 48V and an energy storage capacity of up to 384kWh across multiple systems. Advanced Technology for Optimised Performance This 12.8V battery incorporates an integrated Battery Temperature and Voltage control (BTV) system, which continuously monitors and manages individual battery cells. By balancing the voltages and temperatures, the BTV ensures safe and efficient operation. When connected to an external Battery Management System (BMS), the system allows for real-time monitoring and control of battery parameters via VictronConnect or a GX communication device, ensuring optimal performance and longevity. Key Features Integrated BTV System: Ensures safe operation by managing cell voltages and temperatures in real-time. Expandable Energy Storage: Supports up to 50 batteries in a system, delivering a scalable solution for large energy storage needs. IP65 Rating: Fully dust-tight and resistant to water exposure, ideal for harsh environments. Low Self-Discharge: With a self-discharge rate of just 3% per month, the battery remains highly reliable over time. Built for Versatility and Reliability The LiFePO4 Battery 12.8V/150Ah NG offers a high charge and discharge rate, enabling fast charging and efficient energy usage. Its high energy density ensures that you get more power in less space, making it ideal for both residential and commercial installations. Bracket mounting options allow for secure installation, while the battery’s rugged design makes it suitable for off-grid and challenging environments. This next-generation battery from Victron Energy is the perfect choice for those seeking reliable, scalable, and efficient energy storage solutions, with the added benefit of real-time monitoring through the VictronConnect app or GX communication devices. Voltage: 12.8V Capacity: 150Ah Max Continuous Discharge: 150A Max Charge Current: 150A Dimensions (H x W x D): 205 x 250 x 205mm Weight: 14kg Battery Type: Lithium Iron Phosphate (LiFePO4) Brand Victron Energy Battery Technology Lithium Iron Phosphate (LiFePO4)

Read more less

Banner, The Power Company have been producing top quality since 1937. Coming out of Austria and distributing predominantly across Europe and Asia. But like all the big battery companies they ship to worldwide distributors. Banner Batteries manufacture their products for many sectors, such as automotive, commercial, leisure, industrial, telecoms, power infrastructure and many more.  Banner Energy Bull Leisure batteries are for hobbies and leisure. The robust Energy Bull’s characteristics make it an ideal power pack for camping, caravans, motorhomes, boats and many more applications, which extend to signal systems and electrical motor movers. In tandem with bag separators and a special mass composition, the robust internal mesh structure of the battery ensures extreme cyclical resistance. Energy Bull Leisure Benefits: • Ideal battery for DUAL applications - Starting and power supply • Easy to load thanks to carbon additives in the plate material • Vibration resistant thanks to bottom bonding of the plates • Higher cycle stability than a starter battery • Optimised capacity - ideal for cyclic loads • Solid cold start values - suitable for most starter applications Maintenance free with option for water topping up 2 Year Warranty     

Read more less

  The full power of Victron Remote Management Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system-components which are connected to your Maxi GX. It allows remote user and installer login – from anywhere, at anytime. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information. Automatic Generator start/stop The Maxi GX can be programmed to auto-start your generator – triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of ‘quiet’ periods – avoiding accidental nuisance at dead of night. Remote Console – control everything from anywhere… The Remote Console feature allows full access remotely, via the internet and the VRM Portal, to all settings.   Brand Victron Energy Manufacturer Part Number BPP900410200 Power Supply Voltage Range 32-70 V DC VE.Direct Ports (always isolated) 25 VE.Bus (always isolated) 1 RJ45 socket VE.Can No Wifi No Temperature sense inputs No Digital Inputs 4 Max. VE.Direct devices 25 Protection Category IP65 Dimensions H600 x W380 x D210 mm Warranty 5 Years

Read more less

The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator.   Please see Victron Energy’s ‘Energy Unlimited’ or ask for specialist advice when installing a diode isolator. Simply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely.   Alternator energize input Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run/stop switch is closed Brand Victron Energy Manufacturer Part Number ARG180301020 GTIN 8719076019121 Maximum charge current 180A Maximum alternator current 180A Number Of Batteries 0003 Alternator Energize Input Yes Connection M8 Studs Compensation diode & Energize Connection 6.3mm Faston Dimensions H60 x W120 x D200mm Weight 1.5Kg Warranty 5 Years

Read more less

Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.   PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.   Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.   Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.   Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.   On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.   Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP242505010 GTIN 8719076052913 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H607 x W330 x D149mm Weight 30Kg Warranty 5 Years

Read more less

The right amount of charge for a lead-acid battery: variable absorption time BatterySafe mode: preventing damage due to excessive gassing Storage mode: less maintenance and aging when the battery is not in use Smaller and lighter compared to similar models NMEA2000 Canbus connection PowerControl: set a maximum shore power Remote Control Li-ion (LiFePo4) ready   Features Rugged Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Flexible Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use. Please refer to the manual for a complete overview of the possibilities. Synchronised parallel operation Several chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Please see the manual for details. The right amount of charge for a lead-acid battery: variable absorption time When only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. Preventing damage due to excessive gassing: the BatterySafe mode If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-i will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. Less maintenance and aging when the battery is not in use: the Storage mode The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. To increase battery life: temperature compensation Every Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected. Battery voltage sense In order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. Suitable for AC and DC supply (AC-DC and DC-DC operation) The chargers also accept a DC supply. Use as a power supply As a result of the perfectly stabilized output voltage, the Skylla-i can be used as a power supply if batteries or large buffer capacitors are not available. Li-Ion (LiFePO4) ready Simple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port. Brand Victron Energy Manufacturer Part Number SKI024100000 Voltage 24 Charger Current House Battery 100A Charger Current Starter Battery 4A Recommended Battery Capacity 500 – 1000Ah Battery Connection M8 Bolts Outputs 1+1 Temperature Sensor Yes Can Be Used As Power Supply Yes IP Rating IP21 Dimensions H405 x W250 x D150mm Weight (kg) 7 Warranty 5 Years

Read more less

Fixed directly to the roof cladding, this Mycro Rail can be used on all classic trapezoidal roof profiles. This durable Clenergy part forms part of a solar panel mounting installation on a metal roof. Key features: Solar panel mounting rail for use on a metal roof Made from anodised aluminium Pre-fitted with EPDM rubber pad Dimensions: 380mm (L) x 72mm (W) x 21.3mm (H) Weight: 0.264kg 12-year warranty

Read more less

This part is made up of the following items: 1 x Fox Energy Cube 4.03kWh HV Battery (Master)   1 x  Fox Energy Cube 4.03kWh HV Battery (Slave)     Fox Energy Cube 4.1kWh - Stack of 2 (8.06kWh) Incl. Master ECM4100  4.03kWh Capacity Scalable to 28.21kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM4100 battery modules to be added post installation. Dimensions (Width, Hight, Depth): 570mm x 350mm x 380mm This battery stack allows for a MAXIUMUM OF 7 modules in a series and must include 1 Master    Weight: 76.6 kg Battery Type: Lithium Ion Nominal Energy: 8060 Wh Depth of discharge: 90.00 % Voltage 115 V Continuous Discharge Rate (Normal Use): 5760 W Maximum Discharge Rate (5 Minutes): 5760 W Surge Discharge Rate (15 Seconds): 7488 W Maximum Charge Rate (5 Minutes): 5760 W  

Read more less

A lithium-ion battery pack with intrinsically safe LiFePO4 cells, a built-in charger, and suitable for high discharge currents. Nominal voltage: 12.8V Battery capacity: 8Ah to 40Ah (not suitable for parallel or series connection)   Features Lightweight and easy to install Ideal for mobile applications. Effective protection against improper use Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries. Storage mode Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage. Remote control with status indicator Push button (supplied) with a dual-colour LED status indicator: Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED. Hold down for 2 seconds: high capacity output always activated, slow flashing red LED. Hold down for 5 seconds: storage mode, blue LED flashes 10 times. Battery is charged via input 1:slow flashing blue LED. Battery fully charged: blue LED. Overload or overheating: flashing red LED. VE.Direct port: can be connected to a PC or smartphone (‘VE.Direct to USB’ or ‘VE.Direct Bluetooth Smart dongle’ required) – Operation: Output 1: on / 30-minute timer / off Output 2: on/off Input 1: on/off – Monitoring: Battery voltage Temperature and alarms Brand Victron Energy Manufacturer Part Number PPP012020000 Voltage 12.8 Capacity (C20) 20 Stored Energy 256Wh Battery Technology Lithium Continuous Output Current 150A Short-circuit Current 300A Dimensions (Including Terminals) H132 x W190 x D172mm Weight (kg) 3.8 Warranty 3 Years

Read more less

Features Hybrid Inverter/Charger The Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with 450VDC 4kWp PV input. Combination of an inverter, AC charger, and Solar MPPT The inverter produces a perfect sine wave, and able to supply high powered appliances. It is also bi-directional, charging the battery when excess solar power or AC supply is available, or converting from the battery when it is needed. Wide MPPT voltage range 80 – 450VDC, with a 120 VDC PV startup voltage. Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display, Bluetooth and VictronConnect app The display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device, using the VictronConnect app. Extendable PV capacity, both AC-coupled and DC-coupled The integrated 4kWp PV capacity can be extended by adding Solar Chargers to the system, for example our Smart Solar Charger range, including the Smart Solar RS models. When connected in a VE.Can network, all battery charging will operate synchronously and coordinated. Alternatively, the PV capacity can be extended by installing PV Inverters, of which the output power will be automatically controlled by the integrated Frequency Shift Power Control. Communication ports VE.Can connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring. I/O Connections Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS. Brand Victron Energy Manufacturer Part Number PMR482602000 GTIN 8719076054474 Voltage 48V Cont. output power at 25ºC 6000VA Peak Power 9kW for 3 seconds Output AC Voltage 230V Max. Battery Charge Current 100A Protection Category IP21 Bluetooth Compatible Yes Dimensions H425 x W440 x D125mm Weight 11Kg Warranty 5 Years

Read more less

The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.   Features All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.   Brand Victron Energy Manufacturer Part Number CEP241621010 GTIN 8719076021605 Voltage 24V Transfer Switch 16A Continuous Output Power at 25°C 1600VA/1300W Peak power 3000W Charger Current House Battery 40A Battery Temperature Sensor Yes Programmable Relay Yes Ingress Protection IP22 Battery-Connection Battery cables of 1.5 meter Dimensions (Including Terminals) H745 x W214 x D110mm Weight 15Kg Warranty 5 Years

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.   Brand Victron Energy Manufacturer Part Number PMP122300001 Voltage 12 Transfer Switch (A) 50 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

Read more less

Part No: SIG-GATEWAY-HOMEPRO-SP-F Storage Systems - Communication Module

Read more less

Features Bluetooth inside With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. Download the Victron Bluetooth app Use a smartphone or other Bluetooth enabled device to – customize settings, – monitor all important data on single screen, – view historical data, and to – update the software when new features become available. Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. Midpoint voltage monitoring One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. We recommend the Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid batteries. Very low current draw from the battery Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days. Bi-stable alarm relay Prevents increased current draw in case of an alarm. Brand Victron Energy Manufacturer Part Number BAM030712000R Supply Voltage Range 6.5-70 VDC Battery Capacity (Ah) 1-9999 Temperature Sensor Optional VE.Direct Communication Port Yes Protection Category IP55 Front Bezel 69 x 69mm Body Diameter & Depth 52 x 31mm Warranty 5 Years Country of Manufacture Malaysia

Read more less

Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets.The BTVs of several batteries can be daisy chained. Please see our LiFePO4 battery documentation for details.  The BMS will:Shut down or disconnect loads in case of imminent cell under voltage.Reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below).Shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature. Protects 12V, 24V and 48V systems The operating voltage range of the BMS: 9 to 70V DC. Communicates with all VE.Bus products The VE.Bus BMS connects to a MultiPlus, Quattro or Phoenix inverter with a standard RJ45 UTP cable. Other products, without VE.Bus can be controlled as shown below: Load Disconnect The Load Disconnect output is normally high and becomes free floating in case of imminent cell under voltage. Maximum current: 2A. The Load Disconnect output can be used to control the remote on/off of a load, and/or the remote on/off of an electronic load switch (Battery Protect) Charge Disconnect The Charge Disconnect output is normally high and becomes free floating in case of imminent cell over voltage or over temperature. Maximum current: 10mA. The Charge Disconnect output can be used to control the remote on/off of a charger and/or a Cyrix-Li-Charge relay and/or a Cyrix-Li-ct Battery Combiner CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number BMS300200000 Input Voltage Range 9-70VDC Protection Category IP20 Dimensions H105 x W78 x D32mm Weight (kg) 0.1 Warranty 5 Years

Read more less

Features Battery ‘fuel gauge’, time-to-go indicator, and much more The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.   Standard features Battery voltage, current, power, ampere-hours consumed and state of charge Remaining time at the current rate of discharge Programmable visual and audible alarm Programmable relay, to turn off non critical loads or to run a generator when needed 500 Amp quick connect shunt and connection kit Shunt selection capability up to 10.000 Amps VE.Direct communication port Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health Wide input voltage range: 6,5 – 95V High current measurement resolution: 10 mA (0,01A) Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V Brand Victron Energy Manufacturer Part Number BAM010700100 Supply Voltage Range 60-385 VDC Battery Capacity (Ah) 1-9999 Temperature Sensor Optional VE.Direct Communication Port Yes Protection Category IP55 Front Bezel 69 x 69mm Body Diameter & Depth 52 x 31mm Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number REC020005010 Dimensions L120 x W65 x D3mm Weight (kg) 0.2 Warranty 5 Years

Read more less