Inverters

Part No: EN-IQ8AC-72-M-INT Inverters - Micro Inverter Units Rating: 366W Phases: 1 Supplier Code: IQ8AC-72-M-INT Phases: 1 oder 3 (depending on wiring) MPP Tracker: 1 Inputs per Tracker: 1 Rated AC power: 366 VA MPPT Voltage Range: 28 - 45 V Warranty: 25 Years Technical Specification   Input current: 14 A Short-circuit current: 25 A Connectivity: With the help of the Envoy WLAN/Ethernet and app-enabled    Supplier Part No: EN-IQ8AC-72-M-INT Weight: 1.1 kg Rated Power: 366 W Min PPT Voltage: 18 V Max PPT Voltage: 60 V DC Startup Voltage: 22 V DC Shutdown Voltage: 18 V Max Input Voltage: 60 V Max DC Power: 530 W Max AC Power (5 Minutes): 366 W Surge AC Power (1 Second): 366 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years

Read more less

Part No: EN-IQ8MC-72-M-INT Inverters - Micro Inverter Units Rating: 330W Phases: 1 Supplier Code: IQ8MC-72-M-INT Phases: 1 or 3 (depending on wiring) MPP Tracker: 1 Inputs per Tracker: 1 Rated AC power: 330VA MPPT Voltage Range: 25 - 45 V Warranty: 25 Years Technical Specification  Input current: 14 A Short-circuit current: 25 A Connectivity: With the help of the Envoy WLAN/Ethernet and app-enabled   

Read more less

Part No: EN-STORAGE-BRACKET Storage Systems - Wall Bracket Wall mounting bracket for the Enphase AC battery modules. One required per battery.  BWM-450MM-A: 450 mm (W) x 311 mm (H) Supplier Part No: BWM-450MM-A Weight: 3.86 kg Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

Read more less

 Part No: X3-8000T Storage Systems - Hybrid Inverter X3-HYBRID-5.0T / X3-HYBRID-6.0T / X3-HYBRID-8.0T / X3-HYBRID-10.0T X3-Hybrid HV Three Phase   The new X3-Hybrid High-Voltage is the latest incarnation in battery storage inverters from SolaX. The X3 ranges in size from 5 to 10kW and has the ability to install multiple inverters in parallel . It’s equipped with a built-in EPS (Emergency Power Supply), has multiple communication options (additional Wifi or LAN sticks can be purchased separately) and can be controlled remotely using the SolaX monitoring app, X-Cloud.   Additional features: Unbalanced phase load supported Up to 25.2kWh storage per inverter Up to 10kW Max charge/discharge G100 Export Limitation compliant Suitable for grid trading applications Charging from grid possible Fanless design Please note the minimum number of batteries per X3 Hybrid inverter is 2 and maximum of 4. Please note batteries need to be the same capacity, it’s not possible to connect both 4.5kWh and 6.3kWh to one inverter.   Please note this inverter is not EN50438 IE certified for Ireland.  Supplier Part No: X3-Hybrid 8.0E Weight: 48 kg Rated Power: 8,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 180 V Max Input Voltage: 1,000 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 24 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years Data Sheet Solax X3 Hybrid EN

Read more less

Part No: X3-HYBRID-G4-15.0-V2 Storage Systems - Hybrid Inverter SolaX's X-Hybrid three-phase inverter is the most updated version of their hybrid inverters range. This adaptable and expandable device caters to residential and commercial purposes, with the possibility to incorporate several inverters in parallel allowing for scalable battery storage used in commercial settings. The inverter also comes with a feature called EPS (Emergency Power Supply), which utilizes extra changeover devices. Multiple communication options are available, and the device can be controlled remotely. Some of its significant features are maximum efficiency of 98%, dual MPTT, remote monitoring, an IP65 rating, and a 10-year warranty. Key features: In-built EPS changeover switch Supports up to 150% over-sizing 30A Charge/discharge capability On-grid and off-grid use Includes WiFi dongle Looking to expand your system capacity? See Solax EPS Parallel Box options  – Connect up 6 hybrid inverters with a maximum of 60kW – Connect up 10 hybrid inverters with a maximum of 150kW Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid 15.0-D G4 V2 with WiFi Weight: 30 kg Rated Power: 15,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 950 V Max DC Power: 18,000 W Max AC Power (5 Minutes): 15,001 W Surge AC Power (1 Second): 15,002 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP485021010 Voltage 48 Transfer Switch (A) 100 Cont. Output Power at 25°C (VA) 5000 Peak Power (W) 10000 Max Efficiency 95% Zero Load Power (W) 35 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 4 (12 V and 24 V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H444 x W328 x D240mm Weight (kg) 30 Warranty 5 Years Country of Manufacture India

Read more less

Features A Quattro, plus ESS (Energy Storage System) functionality The Quattro-II can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro-II will automatically connect to the active source. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The Quattro-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the Quattro-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The Quattro-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The Quattro-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Parallel and three phase operation Up to 6 Quatros can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output, and up to 6 sets of three units can be parallel connected per phase for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number QUA482504010 GTIN 8719076054092 Voltage 48V Cont. output power at 25ºC 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H560 x W328 x D148mm Weight 30Kg Warranty 5 Years

Read more less

Features A Quattro, plus ESS (Energy Storage System) functionality The Quattro-II can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro-II will automatically connect to the active source. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The Quattro-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the Quattro-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The Quattro-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The Quattro-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Parallel and three phase operation Up to 6 Quatros can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output, and up to 6 sets of three units can be parallel connected per phase for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number QUA242505010 GTIN 8719076052920 Voltage 24V Cont. output power at 25ºC 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H560 x W328 x D148mm Weight 30Kg Warranty 5 Years

Read more less

IP66 Built-in PID recovery for better module performance (optional) AFCI protection, proactively reduces fire risk Globally recognised branded componentry for longer life Power line communication (PLC) (optional) DC side supports "Y" connector Supports aluminium wire access to reduce cost 6 MPPTs, max. efficiency 98.7% > 150% DC/AC ratio Compatible with bifacial modules Night SVG function Intelligent string monitoring, smart I-V curve scan Remote firmware upgrade with simple operation Application        Commercial Promotion       Solis 5G-PRO Manufacturer       Solis Phases        3 Phase Power Rating         kW80 Inverter Type         String Inverter Built in DC        Yes No. of MPPT       6 Built in Communication         Optional Commodity Code         85044086 Dimensions (mm) (H x W x D)1183 x 585 x 363  

Read more less

Part No: X3-HYBRID-G4-10.0-V2 Storage Systems - Hybrid Inverter High-efficient 150% PV oversized and 110% overload output Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking functio Economic Maximum 16A DC input current, support for high power solar panel Store the surplus energy from PV to battery Low start output voltage makes inverter longer working time Less energy loss on battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid G4 10.0 V2 with Wi-Fi & CT Weight: 34 kg Rated Power: 10,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 0 V Max Input Voltage: 950 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 10,002 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity : 0 Has Integrated DC Switch: No Data Sheet X3 G4

Read more less

 Part No: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter X1 RetroFit AC Charger Upgrade a PV system with the X1 RetroFit AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of Solax batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Supplier Part No: X1-FIT-5.0 Charger G4 Weight: 24.5 kg Rated Power: 5,000 W Data Sheet Solax X1 Fit EN

Read more less

Part No: X1-3000T Storage Systems - Hybrid Inverter X1-Hybrid HV Single Phase The third generation of the X1-Hybrid Storage Inverter is the latest to be released from SolaX and has a range of new features such as built-in EPS output that enables the end user to run off their batteries in the event of a power cut, Export Control making it possible to limit exported power and advanced connectivity making it suitable for grid-trading applications. Other features like easy remote access with monitoring using the SolaX app – Xcloud, makes it very user (and installer) friendly while the industry-leading 10-year warranty gives great peace of mind. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately G100 Export Limitation compliant Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Please note the minimum number of batteries per X1 Hybrid inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria.   Supplier Part No: X1-Hybrid 3000E Weight: 26.9 kg Rated Power: 3,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,300 W Surge AC Power (1 Second): 6,000 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet Solax X1 G3 Hybrid 2021

Read more less

IP66 > 150% DC/AC ratio String current up to 16A Supports RS485, WiFi, GPRS Supports export power control Intelligent redundant fan-cooling Natural convection, Fan-less design Wide voltage range and low startup voltage Supports aluminium wire access to reduce cost AFCI protection, proactively reduces fire risk Intelligent string monitoring, smart I-V curve scan Natural convection, Fan-less design, longer lifespan Globally recognised branded componentry for longer life Supports high power modules for lower installation costs 3/4 MPPT design, supports multiple orientation system design Night time PID recovery function, increases overall system yield (optional) Scan to register on SolisCloud, supports remote upgrade and control Supports GPRS/WiFi communication with less wiring and reduced installation costs Application       Commercial Manufacturer       Solis Phases        3 Phase Power Rating          kW36 Inverter Type       String Inverter Built in DC         Yes No. of MPPT      3 Built in Communication           Optional Commodity Code             85044086 Dimensions (mm) (H x W x D)    629 x 647 x 252

Read more less

Part No: X3-MEGA-50K Inverters - Main Units Rating: 50,000W Phases: 3 X3-MEGA-50K Superior Efficiency Max efficiency 98.3%, European efficiency 98.0% 4 independent MPPTs ECO Invention patent technology High Reliability Top-ranking high quality components Integrated type II DC &AC surge arresters Intelligent Maintenance Intelligent monitoring via APP & Web Multiple-string monitoring for easy trouble shooting (Optional) Excellent Grid Compatibility Advanced grid impedance algorithm for large-scale power stations Active power/reactive power control option (Remotely) UK ONLY: Due to a slight change in the regulations relating to G98 and G99, some manufacturers have had to resubmit their type test certificates for reassessment with the ENA. This may lead to some delays in the processing of applications, but we have been reassured by manufacturers they do not anticipate this to delay applications beyond a few weeks. Segen have not been involved in this process and are unable to provide timescales or dates as to when this works will be completed. Due to our current high volume of calls we would kindly ask you to refrain contacting your AM regarding these timescales. Supplier Part No: X3 Mega 50kWWeight: 65 kgRated Power: 50,000 WMin PPT Voltage: 200 VMax PPT Voltage: 960 VDC Startup Voltage: 200 VDC Shutdown Voltage: 250 VMax Input Voltage: 1,000 VMax DC Power: 65,000 WMax AC Power (5 Minutes): 50,000 WSurge AC Power (1 Second): 55,000 WMax DC Current: 130 AMax DC Inputs: 3Has DC Fuses: 0Connector: MC4Included Connectors: 2Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 5 years Click Here For Specs 

Read more less

IP66 Built-in PID recovery for better module performance (optional) AFCI protection, proactively reduces fire risk Globally recognised branded componentry for longer life Power line communication (PLC) (optional) DC side supports "Y" connector Supports aluminium wire access to reduce cost 6/8 MPPTs, max. efficiency 98.7% > 150% DC/AC ratio Compatible with bifacial modules Night SVG function Intelligent string monitoring, smart I-V curve scan Remote firmware upgrade with simple operation Application        Commercial PromotionSolis       5G-PRO Manufacturer         Solis Phases        3 Phase Power Rating          kW80 Inverter Type         String Inverter Built in DC           Yes No. of MPPT         8 Built in Communication           Optional Commodity Code            85044086 Dimensions (mm) (H x W x D)1183 x 585 x 363

Read more less

Part No: PYL-F-H2-BMU-BASE-H7.10 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 2 x PYL-F-H2-BATT-96V Force-H2 Lithium 3.55kWh battery FH9637 module 96V 37AH   1 x PYL-F-H2-BMU-BASE Force H2 BMS with basement and cables (FC0500M)     Benefits Of The Force-H2 System Modular design enables quick and secure installation with no exposed wiring and connectors Stylish design suits both indoor and outdoor installation (with appropriate protection) Proven BMS with wide inverter compatibility Important MAX DISCHARGE RATE IS ONLY APPLICABLE FOR +- 60 SECONDS Weight:83.5 kg

Read more less