Quick Order

Battery in Brief The LDC12-150-GC12, a 12V 150Ah BCI Group GC12 Deep Cycle Battery by Leoch, is an ideal power solution for various applications. Its true deep cycle AGM technology and green design make it suitable for renewable energy systems, such as solar panels and wind turbines. With its heavy-duty grid/paste design, it is well-suited for deep cycle applications like marine and RV use, providing reliable power for extended periods. Additionally, its high energy density and super anti-vibration design make it a reliable choice for off-grid and backup power systems.  Its true deep cycle AGM technology and heavy-duty grid/paste design make it an excellent choice for powering golf carts and other electric vehicles on the course.  Whether it's for recreational vehicles, marine vessels, renewable energy systems, or backup power, the LDC12-150-GC12 battery offers dependable performance and long-lasting power. Range Info:  The best AGM battery on the market!  The Leoch LDC range of 6, 8 and 12 volt batteries offers superior performance with AGM technology, providing a long-life and super-fast power solution for a multitude of applications in industrial and lifestyle markets, as below.   The LDC range can charge up to 80% in just three hours and is designed for deep cycle performance with a positive plate formula to minimise water consumption and provide a long service life at 1,000 cycles at 60% DoD (Depth of Discharge).  A unique mixture of carbon and other key additives found in negative material allow the LDC range to perform in Partial State of Charge, which offers numerous advantages such as fast charging capability and reduces sulphation, a key reason for premature failure.  Performance capabilities vary from 210Ah to 400Ah (20 hour rate).    Features and Benefits: Special mixture of carbon and other proprietary additives in negative active material (NAM) for high performance in partial state of charge (PSoC) applications Wide model range offering from 6V up to 12V blocks Designed and optimized for cyclic intensive and PSoC motive applications Inhouse improved design of one-of-a-kind separator preventing acid stratification, while optimizing electrolyte retention Unique anti-explosion one-way vent valve design to minimize water loss and increase safety Thick plates using a special pasting formula ensures long service life ABS case UL94-HB (UL94-V0 Optional) is used for increased container strength 1000 cycles at 60% DOD Unique paste formula Wide operating temperature range (-40°- +65°c) Low self-discharge at less than 3% per month at 77°F (25°C) Excellent vibration resistance Wide operating temperature range

Read more less

Compatible Products  Hanchu Single Phase Hybrid Inverter 3.68kW Hanchu Single Phase Hybrid Inverter 5.0kW Hanchu Single Phase Hybrid Inverter 6.0kW   Unparalleled Safety Premium Lithium Iron Phosphate Cells Features high-quality LFP cells from leading suppliers, designed with advanced safety features at the cell level to ensure maximum reliability and peace of mind. Built-in Heat Dissipation System Includes an advanced cooling system to maintain safe battery operation. Advanced BMS Protection Equipped with a built-in Battery Management System (BMS) that ensures comprehensive safety through real-time monitoring, fault detection, and lifespan optimisation. Flexible and Scalable Compact and Minimalist Design Features a sleek, lightweight design that is smaller and lighter compared to similar products, making it ideal for installation in limited spaces without specific spatial requirements. Scalability Supports the connection of up to 16 batteries in parallel, meeting a wide range of user requirements and allowing for simple addition of batteries anytime. Easy and Quick Installation Features user-friendly designs such as pre-assembled wiring harnesses and quick-connect installation, simplifying the setup process and reducing installation time. Smart Energy Management (when linked to Hanchu Controller) Smart Monitoring with iESS: The intelligent iESS platform continuously monitors battery performance, employing both hardware and software solutions to ensure operational safety and efficiency. Octopus Tariff Integration: Compatible with Auto Octopus energy pricing, reducing energy costs by utilising cheaper rates. Smart Weather Compensation Automatically adjusts settings in response to weather conditions to maximise energy efficiency.   HANCHU ESS - 3.6KWH LOW VOLTAGE BATTERY - CLICK HERE FOR FEATURES 12 Years Warranty On All Hanchu Products. All Hanchu products are 12 years warranty with an incredible RMA National service to strengthen the product even more. Technical Specifications Cell Type: LFP Nominal Energy: 3.68kWh Maximum Parallel Number: 16 Nominal Voltage: 51.2V Operating Voltage Range: 43.2-57.6V Dimension (W*D*H) (mm): 484*151*335 Weight: 30.5Kg Charging Temperature: From 0 to 50℃ Discharging Temperature: From -10 to 60℃ Depth of Discharge: 95% DoD Nominal Charge: 72A Discharge Current: 72A Ingress Protection Degree: IP65 Cooling Type: Natural convection Humidity: ≤95% Communication: CAN / RS485 / WiFi / Bluetooth Battery Safety: IEC 62619 / CE Transportation Certification: UN38.3 Warranty: 12 years

Read more less

The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, a fire prevention module, and an IP65-certified design. The EcoFlow PowerOcean comes with a 15-year warranty, with batteries expandable up to 45kWh while offering over 6,000 charge cycles. The EcoFlow PowerOcean is a secure, scalable, and future-proof power investment for your home. Main features: 15 year industry leading warranty Instant cell-level Anti-Fire protection Built in heating pads to ensure optimum performance even in sub-zero temperatures. UK technical support IP65 certification, ensuring it stands strong against dust ingress and resistant to low-pressure water jets from any direction. 95% D.O.D Expandable up to 45kWh per inverter Expandable up to 2 inverters in parallel  Individual BMS allowing optimal performance and ensures compatibility with newer model batteries Industry-leading APP API to charge from Octopus tariffs such as Agile & Flux Sleek, slim design    At the heart of EcoFlow PowerOcean lies our advanced LFP battery pack, meticulously engineered for peak performance and unparalleled safety. This battery pack blends high-efficiency output with innovative safety features, delivering relentless power and peace of mind to all PowerOcean users.  

Read more less

Part No: SIG-STOR-EC-12.0-TP Storage Systems - Hybrid Inverter Sigenergy Sigenstor Energy Controller Three Phase - 12.0 kW 5.0 - 25.0 kW Three Phase EMS inside for precise control DC ground-fault protection Multi-source black start On & off-grid compatibility DC/AC ratio up to 2 IP66 system protection rating Supplier Part No: SigenStor EC 12.0 TP Weight: 36 kg Rated Power: 12,000 W

Read more less

The batteries can be connected in parallel. Series connection is not allowed.    Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512110710 GTIN 8719076053019 Voltage 12.8 Capacity (C20) 100 Terminal Type M8 Terminal Layout LH+ Dimensions (Including Terminals) H220 x W330 x D172mm Weight 14Kg Warranty 3 Years Battery Technology Lithium

Read more less

Features The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16 character display These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and wifi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other wifi enabled device. In addition, wifi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: A VE.Can interface. This can be used to connect to Victron VE.Can devices (e.g. VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery A USB port A Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Brand Victron Energy Manufacturer Part Number PMP482507010 GTIN 8719076049333 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 96% Bluetooth Compatible Yes Dimensions H604 x W323 x D253mm Weight 38.6Kg Warranty 5 Years

Read more less

Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.   Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.   The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.   Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.   Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.   Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm.   Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.   Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.   Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on.   GTIN 8719076055273 Voltage 12V Charge Current 13A Input Voltage 230V Number of Outputs 1 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Protection Category IP67 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

Read more less

Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115110411 GTIN 8719076050353 Voltage 12/24/48V Rated Charge Current 100A Nominal PV Power, 12V 1450W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years

Read more less

The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature. The dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries. The BMS is also equipped with a remote on off connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.   Features Battery Management system The BMS connects to 12,8V Victron LiFePO4 (LFP) batteries. Up to 5 batteries may be connected in parallel. Can be used as a system on/off switch. Alternator and battery protection The input current is electronically limited to approximately 90% of the fuse rating. A 100A fuse, for example, will therefore limit the input current to approximately 90A. Choosing the right fuse will: a. Protect the LFP battery against excessive charge current (important in case of a low capacity LFP battery). b. Protect the alternator against overload in case of a high capacity LFP battery bank (most 12V alternators will overheat and fail if running at maximum output during more than 5 minutes). Starter battery Protection This function is similar to that of a Cyrix Battery Combiner or Argo FET Battery Isolator. Current can flow to the LFP battery only if the input voltage (= voltage on the starter battery) exceeds 13V. And current cannot flow back from the LFP battery to the starter battery, thus preventing eventual damage to the LFP battery due to excessive discharge. Li-ion battery protection Excessive input voltage and transients are regulated down to a safe level. The Smart BMS CL will stop charging in case of cell over voltage or over temperature. It has three outputs, similar to the miniBMS Remote on/off input The remote on/off input controls the charging via the alternator. When off, charging via the alternator is disabled, while the BMS functionality will remain active allowing any loads and chargers to continue working regardless of the state of the remote input. When “system on/off switch” is enabled via VictronConnect, the BMS functionality will also be disabled. It consists of two terminals: Remote L and Remote H. A remote on-off switch or relay contact can be connected between H and L. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery minus Ignition proof No relays but MOSFET switches, and therefore no sparks. Brand Victron Energy Manufacturer Part Number BMS110022000 Maximum continuous charge current 100A (with 125A fuse) Input voltage to start charging > 13V Operating temperature range -40°C to +60°C Protection Category IP65 DC power connection M8 DC connector battery minus Faston female, 6.3mm Dimensions H65 x W120 x D224mm Weight 1.6Kg Warranty 5 Years

Read more less

Features A MultiPlus-II with LCD and GX functionality The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. GX device The integrated GX device includes: A VE.Can interface. This can be used to connect to Victron VE.Can devices (eg VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery. A USB port. A Ethernet port. A VE.Direct port. Applications The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications. Parallel and three phase operation Only one GX unit is needed in case of Parallel and three phase operation Brand Victron Energy Manufacturer Part Number PMP482506000 Voltage 48 Transfer Switch (A) 50 Cont. Output Power at 25°C 5000VA Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H506 x W275 x D147mm Weight (kg) 26 Warranty 5 Years Country of Manufacture India

Read more less

Victron Chargers  Benefits: The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.   Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart   Brand Victron Energy Manufacturer Part Number BPC121531024R Voltage (V) 12 Charger Amps 15 Efficiency 94% Outputs 1 Plug Type UK IP Rating IP65 Dimensions H60 x W105 x D190mm Weight (kg) 0.9 Warranty 5 Years  

Read more less

Features AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action.   Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature with 10°C.  Low internal resistance Accepts very high charge and discharge rates.  High cyclic life capability More than 500 cycles at 50% depth of discharge.  All Prices Include VAT - 2 YEAR WARRANTY Brand Victron Energy Manufacturer Part Number BAT412105164 GTIN 8719076036999 Voltage 12V Battery Capacity (C20) 115Ah Cold Cranking 1000CCA Terminal Type M8 Terminal Layout Side Dimensions (Including Terminals) L395 x W110 x H293mm Weight 35Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Standby Power    

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPM040201200 Voltage 12 Nominal Power (W) 20 Number of cells in series 36 Maximun System Voltage 1000 Dimensions L440 x W350 x D25mm Weight (kg) 1.9 Warranty 5 Years Cell Type Monocrystalline

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPM040901200 Voltage 12 Nominal Power (W) 90 Number of cells in series 36 Maximun System Voltage 1000 Dimensions L780 x W668 x D30mm Weight (kg) 6.1 Warranty 5 Years Cell Type Monocrystalline

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPP040301200 Voltage 12 Nominal Power (W) 30 Number of cells in series 36 Maximun System Voltage 1000 Dimensions L655 x W350 x D25mm Weight (kg) 2.8 Warranty 5 Years Cell Type Polycrystalline

Read more less

  Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.  Brand Victron Energy Manufacturer Part Number ORI122421226 Input Voltage Range 10-15VDC Output Voltage 24VDC Output Current 50A Output Rated Power 1200W Protection Category IP67 Dimensions L340 x W127 x D63 mm Weight (kg) 3 Warranty 5 Years

Read more less

Remote on-off connector The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual). All models with adjustable output can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current Up to five units can be connected in parallel. Easy to install Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40). Low power models: please see Orion-Tr series  PLEASE CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ORI122408020 Input Voltage Range 9-18V Output Voltage 24V Under Voltage Shutdown 8V Under Voltage Restart 10V Continuous Output Current 8A DC Connection Faston tabs 6.3mm Remote on-off No Galvanic Isolation No Can be connected in parallel No Protection Category IP20 Dimensions H45 x W90 x D115mm Weight (kg) 0.4 Warranty 5 Years

Read more less

Adjustable output voltage: can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI244828110 Input Voltage Range 16-35V Under Voltage Shutdown 14V Under Voltage Restart 15V Nominal Output Voltage 48.2V Output Voltage Adjust Range 40-60V Short Circuit Output Current 25A Cont. Output Power at 25°C 320W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI481210110 Input Voltage Range 32-70V Under Voltage Shutdown 28V Under Voltage Restart 30V Nominal Output Voltage 12.2V Output Voltage Adjust Range 10-15V Short Circuit Output Current 27A Cont. Output Power at 25°C 110W DC Connection Screw Terminals Protection Category IP43 Dimensions H100 x W113 x D47mm Weight (kg) 0.42 Warranty 5 Years

Read more less

  Brand Victron Energy Manufacturer Part Number SCC900300000 Weight (kg) 0.21 Warranty 5 Years

Read more less

Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programming, real-time data and history display options Color Control GX or other GX devices: see the Venus documents on our website. A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC110020170R GTIN 8719076049845 Battery Voltage 12/24/48V Rated Charge Current 20A Nominal PV Power, 12V 290W Nominal PV Power, 24V 580W Nominal PV Power, 48V 1160W Max. PV Short Circuit Current 20A Maximum PV Open Circuit Voltage 100V Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Direct IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H100 x W113 x D60mm Weight 0.65Kg Warranty 5 Years

Read more less

Features Control Your Charger Remotely The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.  Daisy Chain Additional Units The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.  Remote Monitoring and Control If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC115070511 GTIN 8719076051114 Battery Voltage 12/24/48V Auto Select (36V: manual) Rated Charge Current 70A Nominal PV Power, 12V 1000W Nominal PV Power, 24V 2000W Max. PV Short Circuit Current 50A (max 30A per MC4 conn.) Maximum PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Efficiency 98% Charge Algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Data Communication Port VE.Can, VE.Direct and Bluetooth Protection Category IP43 (electronic components), IP22 (connection area) Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years

Read more less

Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125060321 GTIN 8719076050858 Battery Voltage 12/24/48V Auto Select (software tool needed to select 36V) Rated Charge Current 60A Nominal PV Power, 12V 860W Nominal PV Power, 24V 1720W Max. PV Short Circuit Current 35A (max 30A per MC4 conn.) Maximum PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V, start-up and operating maximum Efficiency 99% Charge Algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Data Communication Port VE.Direct or Bluetooth IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years

Read more less

Features LED indicators Green: on (battery voltage > 27,3V) Orange: lower battery leg active (deviation > 0,1V) Orange: upper battery leg active (deviation > 0,1V) Red: alarm (deviation > 0,2V). Remains on until the deviation has reduced to less than 0,14V, or until system voltage drops to less than 26,6V. Alarm relay Normally open. The alarm relay closes when the red LED switches on and opens when the red LED switches off Alarm reset Two terminals are available to connect a push button. Interconnecting the two terminals resets the relay. The reset condition will remain active until the alarm is over. Thereafter the relay will close again when a new alarm occurs Even more insight and control with the midpoint monitoring function of the BMV-702 Battery Monitor The BMV-702 measures the midpoint of a string of cells or batteries. It displays the deviation from the ideal midpoint in volts or percent. Separate deviation percentages can be set to trigger a visual/audible alarm and to close a potential free relay contact for remote alarm purposes. Brand Victron Energy Manufacturer Part Number BBA000100100 Input Voltage Range Up to 18V per battery, 36V total Midpoint deviation to start balancing 50 mV Alarm Relay 60V / 1A normally open Over Temperature Protection Yes Protection Category IP22 Dimensions H100 x W113 x D47mm Weight (kg) 0.4 Warranty 5 Years

Read more less

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).  If required, Bluetooth can be disabled. The Smart BatteryProtect is not designed for reverse currents from charging sources.   Features Protects the battery against excessive discharge and can be used as a system on/off switch The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch. 12/24V auto ranging The Smart BatteryProtect automatically detects system voltage one time only. Bluetooth: programming made easy When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If required, Bluetooth can be disabled. A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS Ultra-low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V. Ignition proof No relays but MOSFET switches, and therefore no sparks. Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the battery voltage drops below the preset level. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage. Brand Victron Energy Manufacturer Part Number BPR065022000 Voltage 12/24 Peak Current (During 30 Seconds) 250A Max. Continuous Load Current 65A Connection M6 IP Rating Electronics: IP67 (potted) Connections: IP00 Dimensions (Including Terminals) H40 x W48 x D106mm Weight (kg) 0.2 Warranty 5 Years

Read more less

Features AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action.   Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature with 10°C.  Low internal resistance Accepts very high charge and discharge rates.  High cyclic life capability More than 500 cycles at 50% depth of discharge. Brand Victron Energy Manufacturer Part Number BAT412151164 Voltage 12 Capacity (C20) 165 Cold Cranking (EN) 1500 Terminal Type M8 Terminal Layout Side Dimensions (Including Terminals) L548 x W105 x H316mm Weight (kg) 49 Warranty 2 Years Battery Technology AGM

Read more less

Features Adaptive 4-stage charge characteristic: bulk – absorption – float – storage The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used.   The right amount of charge: variable absorption time When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.   Preventing damage due to excessive gassing: the BatterySafe mode If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.   Less maintenance and aging when the battery is not in use: the Storage mode The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.   To increase battery life: temperature compensation Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.   Battery voltage sense In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.   Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation) The chargers will accept a 90-400 V DC supply.   Computer interface Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with our VEConfigure software, which can be downloaded free of charge from the Victron Energy website and the data link MK3-USB (see accessories), all parameters of the chargers can be customised. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number PCH024025001 Voltage 24 Charger Current House Battery 25A Charger Current Starter Battery 4A Recommended Battery Capacity 100 – 400Ah Battery Connection M6 Studs Outputs 2+1 IP Rating IP21 Dimensions H350 x W200 x D108mm Weight (kg) 3.8 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number BPP900465050 GTIN 8719076054078 Dimensions L128.1 x W87 x D24.4mm Warranty 5 Years

Read more less

  There are multiple models, refer to the manual to see which model best matches the available cellular network bands in your area. It requires a SIM card of the Mini-SIM format; and connects to the GX device with an included 1 meter USB cable. The GX LTE includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal. Brand Victron Energy Manufacturer Part Number GSM100100400 GTIN 8719076052937 Voltage Range 8-70VDC Antenna Connector Type SMA Female SIM Card Regular Mini SIM Dimensions L106 × W42.5 × H22mm Warranty 5 Years

Read more less

  Brand Victron Energy Manufacturer Part Number ASS030064920 Cable Length 0.9m Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number ASS030065010 Cable Length 10m Warranty 5 Years

Read more less

  Brand Victron Energy Manufacturer Part Number ASS030572018 Cable Length 1.8m Warranty 5 Years

Read more less

In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.   When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.   Example: When a current of 100 A flows through a cable of 50 mm2 cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm2 cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!   Alternator energize input Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.   Brand Victron Energy Manufacturer Part Number ARG100301020 Maximum Charge Current (A) 100 Maximum Alternator Current (A) 100 Number Of Batteries 3 Connection M8 Bolts Dimensions H65 x W120 x D200mm Weight (kg) 1.4 Warranty 5 Years

Read more less

  Brand Victron Energy Manufacturer Part Number BPC900110014 Warranty 5 Years

Read more less

Simply use a 13mm spanner to tighten the bolts on the hook and it will clamp onto the standing seam. You can then attach whatever you wish onto the 11mm slot on the top of the clamp. Needs an L bracket or cross connect to attach to the rail.

Read more less

Part No: FE-F3000 Inverters - Main Units Rating: 3,000W Phases: 1 FOX ESS - PV Inverter - F Series - 3kW F3000 Our Dual-MPPT F Series range includes 3.0 - 6.0kW models. The F Series is IP65 rated and battery ready for easy upgrade when paired with a Fox ESS charge controller. High Performance: Low start-up voltage, wide voltage range, 97.4% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: F3000 Weight: 15.5 kg Rated Power: 3,000 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,000 W Surge AC Power (1 Second): 0 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.8 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Topband battery makes our products available through the best knowledge-based distribution and service organizations for the people and businesses who rely on batteries to work, live, or get away. Topband battery provides advanced LiFePO4 batteries for lead acid drop-in battery solution, light and compact drop-in replacement Features Standard lead acid cases, customized case Bluetooth app monitoring Heating function optional 4000+cycles，80%DOD UN38.3/CE certified Support series or parallel connection Nominal Voltage 12.8V Battery Capacity 100Ah Terminal Type M8 Dimensions L307 x W168 x H211mm Weight 12.5Kg Warranty 5 Years Battery Technology Lithium Battery Application Deep Cycle Max. Charge Current 150Ah

Read more less

CODE TNE12-230 MPN (MANUFACTURER PART NUMBER) TNE12-230 Features Maintenance Free VRLA battery, no need to add water or acid during application. Longer cycle life: 400-600 cycles at 100%DOD. Higher capacity: Patented structure design with high utilization of active material, maximum improve the utilization rate of active material and the utilization ratio of battery internal space, 5%-10% higher capacity than similar products in the market. High performance for large current discharge. New structure for plate grid, greatly reduced resistance of the battery, uniform internal electrochemical reaction under large current discharge, excellent capacity recovery from deep discharge Good corrosion resistance of grid. Unique patent alloy with rare earth material, the grid has super corrosion resistance and creep resistance High performance under low temperature. With added conductive material and cryogenic expansion agent of high activity to the plate, the product is of strong accept ability under low temperature. Safety & reliability. Independent designed automatic anti-dry and removable safety valve for convenient common check as well as the sealing function to reduce water loss in the process of charge and discharge and to improve reaction efficiency of sealing. Application Electric Tricycle Low speed electric vehicles Golf trolleys and golf cart Patrol cars Electric Sight-seeing Tour Bus Sweeper Electric Wheelchairs Lawn mowers etc Voltage 12V Battery Capacity (C20) 230Ah Terminal Type I7 Terminal Layout Side Dimensions (Including Terminals) L532 x W207 x H220mm Weight 32Kg Warranty 2 Years Country of Manufacture China Battery Technology AGM Battery Application Deep Cycle

Read more less

CODE TN-LFP12.8V42Ah MPN (MANUFACTURER PART NUMBER) TN42 Features Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions Built-in automatic protection for over-charge, over discharge, over current and over temperature Free of maintenance Internal cell balancing Lighter weight: About 40% -50% of the weight of a comparable lead acid battery Can be charged using most standard lead-acid charges (set) Wider temperature range:-20°C-60°C Support for Series application expansion (up to 51.2V) and two in parallel Applications UPS Solar &Wind Power System Golf Cart Electric Vehicle , E-bike, E-rickshaw etc. Lighting   Voltage 12V Battery Capacity (C20) 42Ah Terminal Type M6 Terminal Layout Right Hand Positive Dimensions (Including Terminals) L197 x W165 x H170mm Weight 5.7Kg Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

Read more less

Exide 100 Start Stop EFB Car Battery EL652 Exide are one of the leading battery manufacturers companies in the world and have been delivering quality in the automotive and infrastructure sectors for more than 130 years! They have high level safety features and accept a high level of charge throughout the life of the battery. With 3DX grid technology and regenerative braking these batteries are the latest generation approved by car manufacturers. They have a 3 times higher cycle life and are suitable for intensive use. All Prices Include VAT Brand EXIDE Voltage 12 Volts Technology EFB Capacity 65 Ah - CCA 650 A Length 278 mm Width 175 mm Height inc. terms 175 mm    3 YEAR WARRANTY  Type 100 EFB

Read more less

Brand New Generator with remote start! Smart, reliable and with a remote key fob allows you to start and stop your generator from up to 24m away – the Champion 3600-Watt Inverter Petrol Generator is the perfect solution for camping, outdoor events or keeping home appliances running in an outage. A 212cc engine and a large 8.7-litre fuel tank can run up to 14 hours at 25% load. Packed with smart features, the generator uses True Sine Wave technology to protect sensitive electronics against surges for a safe connection. Meanwhile, the low oil shut-off sensor, USB interface & 3in1 Intelliguage come together in a low-maintenance, high-functioning generator. It even has a built-in handle and wheel for even more ease. Sitting in a league of their own, Champion products are designed, engineered and tested in the most demanding environments to give you the most confidence. Boasting unique features, the generator also has a digital 15-second power delay to allow sensitive equipment to be left plugged in on start-up and shut down, as well as a millisecond peak current of 15.8 amp to prevent equipment from tripping or overloading the generator. All protected by a 3-year warranty, you can trust in the quality and our support  

Read more less

Part No: MC4-5M-2 Cables - Pre Terminated Cables Keywords: MC4 10M2, 1xMale, 1xFemale each cable, MC4. Stäubli, PV Cable, Pre Terminated Cable Please note: 6mm cable may be substituted at the 4mm price when 4mm cable is out of stock.   A mix of 4 and 6mm will be provided   Supplier Part No: 100038568 Items in this pack: 2 Weight: 0.58 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Supplier code:32.0014P0001 Female cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm² Rated current: 39 A (for 4 and 6mm2 cable) Please use correct MC4 approved tools to crimp these connectors on to bare cables. 

Read more less

Part No: GSE-CLAMP-DOUBLE-H21-BLA Mounting - Module Clips   Supplier Part No: ART100744 Weight: 0.034 kg  

Read more less

VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. Maintenance Free Other References 813010 2 Year Warranty Terminals Brand Varta Product Code A28 DIN 813 010 000 Voltage 12 Volts Technology Wet Capacity (C20) 110 Ah Length 346 mm Width 172 mm Height inc. terms 239 mm Other References 813010000 Guarantee 2 Years Barcode (EAN) 4016987128701

Read more less

C22 VARTA Dynamic SLI Car Battery Innovation with Purpose, Premium Experience, Powerful History VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA Dynamic SLI is made for vehicles with average power needs. Ideal for standard equipment and without start-stop technology. VARTA Dynamic SLI offers extra starting power and provides consistently high performance for longer periods of time. Thanks to the highest European engineering standards you´ll get the best of German engineering quality. The Dynamic SLI battery range benefits also from a 4 year guarantee! Dynamic SLI Key Benefits • Engineered to the highest German standards • Patented PowerFrame® grid for reliable starting power, fast recharge and corrosion resistance. • "Like-for-like" replacement of OE batteries (Original Equipment) • For all cars with standard equipment • Recyclable and produced in an energy-saving way Maintenance Free Other References 012, Varta DIN: 552 400 047, Blue Dynamic 4 Year Warranty *Always cross reference dimensions and specifications to your existing battery or application before ordering. Terminals Brand Varta Product Code C22 ETN 552400047 Voltage 12 Volts Technology Wet Capacity (C20) 52 Ah CCA (EN) 470 A Length 207 mm Width 175 mm Height inc. terms 190 mm Other References 012, Halfords HB012 / HCB012 Weight 12.40 Kg Guarantee 4 Years Barcode (EAN) 4016987167564

Read more less

VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA Blue Dynamic is made for vehicles with average power needs. Ideal for standard equipment and without start-stop technology. The Blue Dynamic battery range benefits also from a 4 year guarantee! Blue Dynamic Key Benefits • Engineered to the highest German standards • Patented PowerFrame® grid for reliable starting power, fast recharge and corrosion resistance. • "Like-for-like" replacement of OE batteries (Original Equipment) • For all cars with standard equipment • Up to 25% higher starting power than Black • Available in 25 models of varying capacity, CCA and size • Recyclable and produced in an energy-saving way Maintenance Free Other References 027, Varta DIN: 560 408 054 Replaces UK Part reference 027 Replaces VW / Audi 8N7 915 105A 4 Year Warranty Terminals Brand Varta Product Code D24 DIN 560 408 054 Range Varta Blue Voltage 12 Volts Technology Wet Capacity (C20) 60 Ah CCA (EN) 540 A Length 242 mm Width 175 mm Height inc. terms 190 mm Other References 560408054 Guarantee 4 Years Barcode (EAN) 4016987119501

Read more less

VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA Silver Dynamic is the perfect choice for non-start-stop technology with the highest power needs. It offers supreme starting power that will meet the toughest energy demands without compromise.  Silver Dynamic Key Benefits • Engineered to the highest German standards • Patented PowerFrame® grid for reliable starting power, fast recharge and corrosion resistance. • "Like-for-like" replacement of OE batteries (Original Equipment) • The premium battery for vehicles with non-start-stop technology • Up to 15% higher starting power than the Blue Dynamic series • Available in 11 models of varying capacity, CCA and size • Recyclable and produced in an energy-saving way Maintenance Free Other References 019, 600 402 083 5 Year Warranty Terminals Brand Varta Product Code H23 DIN 600 402 083 Range Varta Silver Voltage 12 Volts Technology Wet Capacity (C20) 100 Ah CCA (EN) 830 A Length 353 mm Width 175 mm Height inc. terms 190 mm Other References 600402083 Guarantee 5 Years Barcode (EAN) 4016987119808

Read more less