INVERTERS FOR SOLAR / BATTERY STORAGE

Part No: SE-BATTERY02-10KWH Storage Systems - Li-ion Battery PackBAT-10K1PS0B-02 Compatible with all models of SolarEdge single phase HD wave inverters including both Home wave and Home hub. Integrates with the complete SolarEdge residential offering, providing a single point of contact for warranty, support, training, and simplified logistics & operations. NMC 9.7kWh / 5kW Li-ion technology DC coupling Support up to 3 batteries per inverter for more power and capacity 100% depth of discharge Superior system efficiency (PV> Battery> Grid) Simple installation with plug & play: Floor mounting or wall mounting Automatic configuration with pre-defined settings All SolarEdge solutions are managed by a single APP to optimize production, consumption and stored energy Through improvements in its mechanical design, SolarEdge were able to design their new battery to certify with the UL9540A standard, on top of the existing IEC62619 EU, making it one of the first residential batteries to meet the strictest standards for fire safety hazards. The installation has been simplified and the package no longer contains a fire extinguisher. Please refer to the other parts section and review any other products you may require for this installation. Please contact us if you have any questions. Please note installers must be trained and certified in order to install this battery. Installer certification course is available in the Solar Edge Edge Academy.   Supplier Part No: BAT-10K1PS0B-02 Weight: 120 kg Battery Type: Lithium Ion Nominal Energy: 9700 Wh Depth of discharge: 100.00 % Voltage: 400 V Continuous Discharge Rate (Normal Use): 5000 W Maxi um Discharge Rate (5 Minutes): 5000 W Surge Discharge Rate (15 Seconds): 7500 W Maximum Charge Rate (5 Minutes): 5000 W Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. 

Read more less

  Part No: SOL-S6-EA1P5K-L Storage Systems - Charger-Inverter Solis Single Phase Low Voltage AC-Coupled Inverters   S6-EA1P(3.6-6)K-L series is a new generation of AC coupled products, designed to provide photovoltaic energy storage upgrading solutions for the built grid-tied system, so that it has energy storage and emergency power supply capabilities. Supports Peak Shaving Mode Industry leading to a max 125A/6kW max charge/discharge rating Provide intelligent time of use solution together with the monitoring group Increased battery protection and operation features to extend battery life Real-time battery monitoring, remote upgrade, and battery healing function to prolong battery life 40-60V battery voltage range 19.9kg weight  1P66 Ingress protection 

Read more less

Brand CTEK Product Code 56-689 Barcode (EAN) 7350009566896

Read more less

Details The GivEnergy 11kW Hybrid 3 Phase Inverter is a powerful and versatile unit that combines both a battery inverter and a solar inverter in one. This allows for easy and efficient use of both solar panels and energy storage to generate and store electricity for later use. The inverter is AC and DC coupled, making it incredibly flexible and easy to install. It also features on/off grid phase balancing, which ensures that power is distributed evenly between the grid and the battery. With a discharge rate of up to 11kW, it can easily meet the energy demands of any property. One of the key benefits of the GivEnergy Hybrid Inverter is its increased efficiency. It can deliver higher discharge rates, which means that it is able to store and distribute more energy than other similar inverters on the market. This makes it an ideal choice for anyone looking to maximise their energy savings and reduce their carbon footprint. The in-built WiFi network connection allows for easy monitoring and control of the system, so you can always keep track of your energy usage and make adjustments as needed. The unit is also compatible with the GivEnergy HV 3.4kwh battery range, making it a seamless addition to any existing energy storage setup. With a weight of 35kg and a 5-year warranty, the GivEnergy 11kW Hybrid 3 Phase Inverter is a reliable and high-performance choice for any property owner looking to harness the power of solar energy and energy storage. Contact us for lead times. Product Features High discharge rate - up to 11kW Low tariff rates - charge from the grid at off-peak times Peace-of-mind - 5 year full manufacturer's warranty Three phase connection Compact size, big output - weights only 35kg and measures 658 x 214 x 480mm Works with the Givenergy HV 3.4kwh battery range

Read more less

Features Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Real-time data display options ColorControl GX or other GX devices A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC020050200 GTIN 8719076025566 Battery Voltage 12/24V Auto Select Rated Charge Current 50A Nominal PV Power, 12V 700W Nominal PV Power, 24V 1400W Max. PV Short Circuit Current 60A Maximum PV Open Circuit Voltage 100V Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Direct IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H130 x W186 x D70mm Weight 1.3Kg Warranty 5 Years

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer          Solis Phases      1 Phase Power Rating          kW1 Inverter Type        String Inverter Built in DC           Yes No. of MPPT         1 Built in Communication          Optional Commodity Code            85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

Brand Victron Energy Manufacturer Part Number CIP137200010 Warranty 5 Years Country of Manufacture India Appr. Voltage Drop 80 mV Cold Resistance 0.25

Read more less

Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI242428110 Input Voltage Range 16-35V Under Voltage Shutdown 14V Under Voltage Restart 15V Nominal Output Voltage 24.2V Output Voltage Adjust Range 20-30V Short Circuit Output Current 30A Cont. Output Power at 25°C 320W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

FeaturesVE.Direct communication portThe VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)   Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms       Proven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.DC connection with screw terminals No special tools needed for installation.   GTIN 8719076054948 Voltage 12V Cont. output power at 25°C 1200VA Peak Power 2200W Output AC Voltage 230V Efficiency 91% Bluetooth Enabled No Plug Type UK Protection Category IP21 Dimensions H117 x W232 x D362mm Weight 7.4Kg Warranty 5 Years Country of Manufacture China

Read more less

Manufacturer Code: Squirrel pod Order Code: LUX-AC-SQPD Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Luxpower’s Squirrel Pod Inverter is a retrofit solution designed for transforming existing on-grid systems into efficient energy storage systems. This lightweight and compact inverter serve as the ideal choice for retrofitting and upgrading your current on-grid setup. While it cannot directly connect to PV panels, its primary purpose is to facilitate the transformation of your existing grid-tied system. Different to ACS 3600, the Squirrel Pod has additional hardware that allows it to have up to six controllers attached to them, multiplying their power. Requiring their own battery, it can be connected individually or through a combined connection to a main fuse box. The Squirrel Pod works in parallel, meaning that only the primary controller has CT clamps fitted, with other units all set to subordinate working mode. All Squirrel Pod units are listed on the ENA Register, with G100 certification. Key Features Retrofit any on-grid/micro-grid system to energy storage system Modular expansion – link up to 6 units together Allows up to eight batteries connected Battery charging/discharging current: 70A Compatible with dynamic Octopus energy pricing Advanced weather compensation programming On/off grid seamless switching Separate EPS port for flexible load management Free monitoring – For mobile & web portal (PC)   PV Input Max. PV array power : N/A Max. input voltage : N/A MPPT voltage range / rated input voltage : N/A Min. input voltage / start voltage : N/A No. of independent MPPT trackers / strings per MPPT input : N/A Max. input current per MPP tracker : N/A Max. short-circuit current per MPP tracker : N/A Battery Input Nominal battery voltage : 48V Battery voltage range : 40V to 60V Max. charging / discharge power : 3600W Max. charging current / Max. discharging current : 70A Battery type : Lithium-ion AC Output AC voltage range / Nomlnal AC voltage : 230V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 3600W Max. apparent power : Rated grid output current (@230V) : 16A Max. grid output current : AC Input Rated grid voltage : 230V Rated apparent power : 6000W Max. input apparent power from grid : Rated input curent from grid : Max. input current from grid : 26A EPS Output Nominal output voltage : 230V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : Max. output apparent power : 3600w Peak output apparent power : 4500W | 30s Max. output current : 16A Max. switch time : 20ms Efficiency MPPT efficiency : Euro efficiency / Max. efficiency : 97.0%/97.3% Max. battery to load efficiency : 94.50% General Data Dimensions (W*H*D) (mm) : 550*320*110 Device weight : 15.6Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : <25dB Standby consumption : <10 Degree of protection (as per lEC 60529) : IP65 Features User interface : LCD & APP Communication with BMS : RS485/WiFi/CAN Communication with meter : Communication with portal : Other communication : Wi-Fi Communication : LCD/ LED/RS485/ Wi-Fi/ CAN Integrated power control / Zero export control : Certifications : IEC62109-1 | IEC62040| EN 61000-6-1:2007 | EN 61000-6-3:2007+A1:2011+ AC:2012 | EN 61000-3-2:2014 | EN 61000-3-3:2013 | VDE-AR-N 4105 Warranty : 12 years  

Read more less

Single Phase Low Voltage AC-Coupled Inverter Leading Features Supports Peak Shaving Mode 6 customisable charge/discharge time settings Compatible with multiple brands of lithium battery models Industry leading 125A/6kW max charge/discharge rating Increased battery protection and operation features to extend battery life Provide intelligent time of use solution together with the monitoring group

Read more less

Compatible with generators to extend backup duration during grid power outages. Enables multiple inverters to work together, forming a microgrid. Offers dual backup ports for smart management of critical and non-critical loads. Supports up to six battery charging and discharging Time-of-Use (TOU) schedules to reduce electricity costs. Provides 200% overload capacity for up to 10 seconds. Features flexible settings for lithium batteries, including support for non-communicating battery types.

Read more less

If a secondary CT is required for Fox installation, this product can be used for that requirement. This CT is compatible with the AC charger and 3PH Hybrid.

Read more less

Part No: X1-HYBRID-G4-3.7-V2 Storage Systems - Hybrid Inverter G4-V2 HV Single Phase Hybrid Inverter and Charge controller  This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C   Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment   Supplier Part No: X1 G4- Hybrid 3.7 D with Wi-Fi Weight: 24 kg Rated Power: 3,680 W Min PPT Voltage: 70 V Max PPT Voltage: 550 V DC Startup Voltage: 90 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years    

Read more less

Product Features Max. efficiency 97.7% String current up to 18A/32A Compact and lightweight Wide voltage range and low startup voltage 2 MPPT design with precise MPPT algorithm Integrated Export Power Manager (EPM) AFCI protection, proactively reduces fire risk Friendly and adaptable connection to the grid Manufacturer        Solis Phases         1 Phase Inverter Type          String Inverter Commodity Code         85044086 Dimensions (mm) (H x W x D)543 x 310 x 180

Read more less

Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack It has 100% DoD, with 5.12kW max discharge power, a long-life span with a standard 5-year product warranty. Additional features:  Up to 16 units with the same firmware can be paralleled  IP rating 40  Self-monitoring function to detect abnormalities  Excellent thermal stability  Brackets not included; use these - SUN-WALL-BR Please note: These batteries contain CATL cells and are not intercompatible    Supplier Part No: Sunsynk CATL Battery LFP 5.12kWh Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W

Read more less

Charging Specifications: • Charges 12V Batteries • Charges batteries of 5Ah - 60Ah • Trickle charges batteries up to 120Ah • Can charge Lithium batteries • Comes with croc clips and eyelet connectors   Brand CTEK Charge Voltage 12 V Charge Rate 5 A Length 168 mm Width 65 mm Height inc. terms 40 mm Lithium Charge Capacity (up to) 5 Ah - 60 Ah Trickle Charge 1 Ah - 120 Ah Guarantee 5 Years Barcode (EAN) 7340103400035

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid     Manufacturer.       Solis Phases.      1 Phase Power Rating.      kW3.6 Inverter Type.     String Inverter Built in DC.       Yes No. of MPPT.        1 Built in Communication.       Optional Commodity Code.           85044085 Dimensions          (mm) (H x W x D)373 x 310 x 160

Read more less

Part No: PEAS69-EL32R-4 Switches - AC Isolators PEAS69-EL Enclosure AC Isolator 32A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification   Supplier Part No: PEAS69-EL32R-4 Weight: 0.4 kg Rated Power: 7,360 W Poles: 4 Max Cable: 10 mm2 Max Voltage: 240 V Rated Current: 32 A Rated Voltage: 230 V

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.7%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• 2 MPPT design with precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid   Manufacturer       Solis Phases       1 Phase Power Rating        kW5 Inverter Type        String Inverter Built in DC        Yes No. of MPPT        2 Built in Communication         Optional Commodity Code        85044085 Dimensions (mm) (H x W x D)       543 x 310 x 160

Read more less

Features Control Your Charger Remotely The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.  Daisy Chain Additional Units The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.  Remote Monitoring and Control If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC115070411 GTIN 8719076050322 Battery Voltage 12/24/48V Auto Select (36V: manual) Rated Charge Current 70A Nominal PV Power, 12V 1000W Nominal PV Power, 24V 2000W Max. PV Short Circuit Current 50A Maximum PV Open Circuit Voltage 150V absolute maximum coldest conditions, 145V start-up and operating maximum Efficiency 98% Charge Algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Data Communication Port VE.Can, VE.Direct and Bluetooth IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years

Read more less

Part No: SOL-RS485-PLUGS Display - Web Interfaces Solis RS485 Comm Plugs to use to connect the communication port comes in a pack of 5. 

Read more less

Product features Mains connection: 3-phase AC output: 8 kVA 8 kW emergency power output via separate output MPP tracker: 4 with 1 string output each Max. short circuit current per MPPT: 24 A Max. input current: 16 A Communcations: CAN, RS485, Wi-Fi 3-phase smart meter with 3 current transformers included Incl. WiFi+LAN kit Protection category: IP66 Warranty: 5 years Manufacturer.     Solis Phases.     3 Phase Power.     Rating kW8 Inverter Type.      Hybrid Inverter No. of MPPT.     4 Commodity Code.       85044086 Dimensions.       (mm) (H x W x D)496 x 596 x 230  

Read more less

Part No: SE-10000H-NET-RWB Storage Systems - Hybrid Inverter SolarEdge Home Hub Inverter for Storage and Backup Application SE10000H - 10kW Requires the SolarEdge Backup Interface (SE-SBI-1PH) for the Backup funciton to work. (The inverter can work without the Backup interface)  Small, lightweight, and easy to install Advanced safety features with integrated arc fault protection Enables module-level monitoring and full visibility of battery status, PV production, and self-consumption data A scalable solution that supports future homeowner needs through easy connection to a growing ecosystem of products 12-25 Year Warranty, see 'Other Parts' section below Only certified to be installed in UK, Spain and France   Backup Interface update for UK: With a TN-C-S supply and the SolarEdge Backup Interface, you MUST install an earth electrode to the MET. Please refer to 'SolarEdge QIG UK ONLY (Corrected)' for full details.

Read more less

FeaturesVE.Direct communication portThe VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed)  Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)   Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms       Proven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.DC connection with screw terminals No special tools needed for installation. Click here for specsheet

Read more less

Part No: FE-KH1-10.5 Storage Systems - Hybrid Inverter The FoxESS KH10.5 is easy to install, saving you valuable time on site. The FoxESS Cloud allows for easy remote monitoring and control, making it a breeze to support remotely.  FoxESS KH10.5 Features Compatible with: ECS2900  Compatible with: ECS4100  Compatible with: ECS4800  Compatible with: HV2600  IP65 rated solution - suitable for outdoor installations Remote monitoring via web portal or smartphone with included Wi-Fi dongle Natural cooling - ensure quiet operation Quad MPPT - optimal solar production Built in Type II AC & DC surge protection Register here for a free extra 5-years warranty! CT clamp is included in the box for zero export control. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. The FoxESS KH10.5 is NRS certified.   Supplier Part No: KH10.5 Weight: 29 kg Length: 0.62 m Rated Power: 10,500 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,500 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 8 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 4 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-F5000 Inverters - Main Units Rating: 5,000W Phases: 1 FOX ESS - PV Inverter - F Series - 5kW F5000 Our Dual-MPPT F Series range includes 3.0 - 6.0kW models. The F Series is IP65 rated and battery ready for easy upgrade when paired with a Fox ESS charge controller. High Performance: Low start-up voltage, wide voltage range, 97.4% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: F5000 Weight: 15.5 kg Rated Power: 5,000 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 0 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.8 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

This is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The X-Hybrid is can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. AC attributes Max power: 6000W Max current: 28.6A Number of phases: 1 DC attributes Max power 9000W Max Isc current 16A Max voltage 550V Start up voltage 90V    

Read more less

S6-GR1P(0.7-3.6)K-M series inverter is designed for residential PV plants. The maximum input current per string is 14A which is compatible with high-efficiency modules and bi-facial modules. Compact and lightweight design make it easy to install. Fanless design lower noise brings you a comfortable living environment. Integrated AFCI function can proactively reduce the risk of fire. Manufacturer.        Solis Phases.          1 Phase Power Rating.        kW3 Inverter Type.       String Inverter Built in DC.      Yes No. of MPPT.      1 Built in Communication.       Optional Commodity Code.         85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.    Features of the Phoenix 12/2000 Smart Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms  VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.  Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.  High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.  ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.   Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).   To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.   Control over system Want to have perfect control over your system from wherever you are whilst using your Phoenix Inverter 12/1600 Smart, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.

Read more less

Adjustable output voltage: can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI244828110 Input Voltage Range 16-35V Under Voltage Shutdown 14V Under Voltage Restart 15V Nominal Output Voltage 48.2V Output Voltage Adjust Range 40-60V Short Circuit Output Current 25A Cont. Output Power at 25°C 320W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPM040901200 Voltage 12 Nominal Power (W) 90 Number of cells in series 36 Maximun System Voltage 1000 Dimensions L780 x W668 x D30mm Weight (kg) 6.1 Warranty 5 Years Cell Type Monocrystalline

Read more less

MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally. Load output The intelligent Load output function prevents damage caused by running batteries ‘flat’. You can configure the voltage at which SmartSolar disconnects a load – thereby preventing excessive drain on your batteries. And here’s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can’t – during periods of poor weather – it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Brand Victron Energy Manufacturer Part Number SCC075010060R GTIN 8719076040798 Battery Voltage 12/24 Auto Select Rated Charge Current 10A Nominal PV Power, 12V 145W Nominal PV Power, 24V 290W Max. PV Short Circuit Current 13A Maximum PV Open Circuit Voltage 75V Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Direct IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

Read more less

Available models: 150A / 70V – 4 high current connections 150A / 70V – 6 high current connections 250A / 70V – 4 high current connections 600A / 70V – 4 high current connections and 8 low current connections 600A / 70V – 8 high current connections and 8 low current connections  For more technical information and for the busbar dimensions see the datasheet.     Brand Victron Energy Manufacturer Part Number VBB115040020 GTIN 8719076052197 Maximum Current 150A Maximum Voltage 70VDC Terminal Diameter 6.35mm Terminal Height 17mm Dimensions H45 x W152.4 x D31.8mm Weight 0.2Kg Warranty 5 Years

Read more less

IP66 > 150% DC/AC ratio String current up to 16A Supports RS485, WiFi, GPRS Supports export power control Intelligent redundant fan-cooling Natural convection, Fan-less design Wide voltage range and low startup voltage Supports aluminium wire access to reduce cost AFCI protection, proactively reduces fire risk Intelligent string monitoring, smart I-V curve scan Natural convection, Fan-less design, longer lifespan Globally recognised branded componentry for longer life Supports high power modules for lower installation costs 3/4 MPPT design, supports multiple orientation system design Night time PID recovery function, increases overall system yield (optional) Scan to register on SolisCloud, supports remote upgrade and control Supports GPRS/WiFi communication with less wiring and reduced installation costs Application       Commercial Manufacturer        Solis Phases        3 Phase Power Rating         kW30 Inverter Type       String Inverter Built in DC       Yes No. of MPPT       3  Built in Communication       Optional Commodity Code        85044086 Dimensions (mm) (H x W x D)      629 x 647 x 252

Read more less

4 units in stock for next day delivery Part No: SUN5KTL-L1 Storage Systems - Hybrid Inverter Huawei Fusion Home SUN2000L1 - 3/ 3.68 / 5 /6KTL The Smart Energy Controller (SUN2000- 3 / 3.68 / 5 / 6KTL-L1) is Huawei new single-Phase inverter and is direct compatible with their own Huawei Luna battery Product Features Direct compatible with Luna battery and is Plug and Play and no extra devices is needed AI Self leaning new arc detection Is compatible with the Sun2000-450W-P optimizer Simple commissioning by APP Auto-detection of system equipment Registering your plant by scanning any device Energy Flow illustration Real-time data at anytime and anywhere Performance data back-up Physical & logical module layout Module -level performance monitoring Smart I-V Diagnosis Smart dongle Plug and Play (LAN or 4G dongle available) Smart dongle support up to 10 inverters IP65 Can be installed without batteries as 'battery ready' Max 3 batteries per inverter Supplier Part No: 01075346 Weight: 12 kg Rated Power: 5,000 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,250 W Surge AC Power (1 Second): 5,500 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: Amphenol H4   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Data Sheet Huawei L1  

Read more less

Higher incomes: select the electricity consumption mode in real-time according to the market price; High independence: can be operated out of the power grid Higher efficiency: International leading brand components provide higher efficiency Perfect switch: it's less than 20ms from the grid Manufacturer      Solis Phases       1 Phase Power Rating       kW3 Inverter Type      Hybrid Inverter Built in DC      Yes No. of MPPT      2 Built in Communication        Optional Commodity Code       85044085 Dimensions (mm) (H x W x D).     505 x 333 x 249

Read more less

Manufacturer Code: HESS-HY-T-20K Order Code: HC-20kW-3 Phase Controller Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP65 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems.

Read more less

The EcoFlow PowerOcean Battery sets a new standard in home energy storage, featuring cutting-edge safety elements like LFP battery technology and a built-in fire prevention module. Engineered with an IP65-rated enclosure, it offers strong protection against dust and water, delivering a durable and dependable power solution for your home.To be installed with Power Ocean Plus 3ph hybrid inverters.The Base and Junction Box can stack a maximum of 15kWh capacity, which is 3 batteries.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 3.6kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. Please note, customers new to Givenergy need to call the Givenergy team for training before installation. Also, customers and their installers must have logins created on the GivEnergy portal in order for systems to be registered and commissioned for full operation. AC attributes Max power: 3.6kW Max current: 16A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.7%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• 2 MPPT design with precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer.     Solis Phases       1 Phase Power Rating         kW4 Inverter Type       String Inverter Built in DC        Yes No. of MPPT         2 Built in Communication       Optional Commodity Code        85044085 Dimensions (mm) (H x W x D)       543 x 310 x 160

Read more less

Designed for Large-Scale Solar Installations This inverter is ideal for commercial and industrial solar systems, supporting a DC/AC ratio of over 150%, which allows for the integration of high-power solar panels while reducing installation costs. The inverter’s 16A string current capacity ensures compatibility with the latest high-output modules. Advanced Safety and Protection Features To ensure the highest level of system protection, the Solis 5G 17.0kW Solar Inverter - 3 Phase with DC is equipped with: AFCI (Arc Fault Circuit Interruption) Protection – Detects and prevents electrical faults that could lead to fire risks. Automatic Voltage Stabilisation – Ensures consistent performance, even in weak grid conditions. IP66-Rated Enclosure – Fully sealed for protection against dust, water, and harsh outdoor environments. Smart Monitoring and Connectivity With multiple communication options, including RS485, WiFi, and GPRS, this inverter seamlessly integrates with SolisCloud for remote monitoring and control. Installers and system owners can track performance, run diagnostics, and perform remote firmware updates, reducing the need for on-site maintenance. Compact, Easy to Install, and Low Maintenance Lightweight and Compact Design – Simplifies transport and installation. Natural Convection Cooling System – Enhances reliability without requiring active fan cooling. Low Night-Time Power Consumption (<1W) – Reduces unnecessary energy loss. Why Choose the Solis 5G 17.0kW Solar Inverter? High efficiency (98.7%) for superior energy conversion. Compatible with high-power solar panels, reducing system costs. Built-in safety features for reliable, long-term operation. Smart remote monitoring for easy system management. Upgrade your solar installation with the Solis 5G 17.0kW Solar Inverter - 3 Phase with DC—a perfect combination of performance, safety, and reliability. Manufacturer    Solis Phases      3 Phase No. of MPPT      2 IP Rating    IP66

Read more less

Compatible Products Hanchu High Voltage Battery 9.4kWh Hanchu High Voltage Battery 9.4kWh - BMS   Ultra Performance Exceptional Efficiency Achieves up to 98.8% peak efficiency, maximising the conversion of generated energy into usable power and significantly reducing energy costs. Robust Power Handling Supports up to 110% AC output overloading and up to 120% back-up output overloading for 60 seconds, ensuring reliable performance even during peak demand. Advanced Multi-MPPT Support Equipped with 4 MPPTs, enabling optimal solar energy capture across multiple roof orientations and shading conditions to maximise overall solar utilization. Reliable Operation Ultra-Fast Switching Time With EPS switching time of less than 20 milliseconds, it ensures continuity of critical operations without interruption during power outages. Broad Voltage Compatibility Supports an extensive battery voltage range from 135V to 750V, making it compatible with various high-voltage battery systems for greater versatility. Comprehensive Safety Protection Offers built-in surge protection, insulation resistance monitoring, and multi-layered safeguards against over-temperature and residual currents, ensuring protection for both the equipment and the premises. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Installation The horizontal design and quick plug-in terminals enable fast and convenient installation, minimising labour time and reducing complexity. Advanced Connectivity Offers simple configuration through WiFi via the iESS platform, streamlining setup and integration into existing systems. PV Input Max. PV array power : 54.0kW Max. input voltage : 1000V MPPT voltage range / rated input voltage : 200-850V Min. input voltage / start voltage : 135V No. of independent MPPT trackers / strings per MPPT input : 4 Max. input current per MPP tracker : 30A Max. short-circuit current per MPP tracker : 40A Battery Input Nominal battery voltage : / Battery voltage range : 135-750V Max. charging / discharge power : 36000W Max. charging current / Max. discharging current : 100A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 36.0kW Max. apparent power : 39.6kVA Rated grid output current (@230V) : / Max. grid output current : 60.0A AC Input Rated grid voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated apparent power : 36.0kW Max. input apparent power from grid : 43.5kVA Rated input curent from grid : / Max. input current from grid : / EPS Output Nominal output voltage : 3L/N/PE;220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 36.0kW Max. output apparent power : 33.0kVA Peak output apparent power : 43.5kVA | 60S Max. output current : 60.0A Max. switch time : ＜20ms Efficiency MPPT efficiency : 98.80% Euro efficiency / Max. efficiency : 98.30% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 800*620*300 Device weight : 76.0Kg Operating temperature range : -30℃~+60℃ Noise emissions (typical) : ＜50dB Standby consumption : ＜15W Degree of protection (as per lEC 60529) : IP65 Features User interface : OLED&LED&APP Communication with BMS : / Communication with meter : / Communication with portal : / Other communication : / Communication : RS485/CAN/WiFi/LAN(Optional) Integrated power control / Zero export control : Integrated/Integrated Certifications : IEC 62109/EN 61000/EN 50549-1/NTS/VDE-4105/G99/G100/CEI/NRS 097/CEI 0-21/NEN Warranty : 12 years

Read more less

Compatible Products Hanchu High Voltage Battery 5.12kWh Hanchu High Voltage Battery 5.12kWh - BMS Hanchu High Voltage Battery 2.7kWh Hanchu High Voltage Battery 2.7kWh - BMS Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP66 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems. PV Input Max. PV array power : 18000Wp Max. input voltage : 1100V MPPT voltage range / rated input voltage : 200V to 950V/630V Min. input voltage / start voltage : 60V/180V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 20A Max. short-circuit current per MPP tracker : 30A Battery Input Nominal battery voltage : / Battery voltage range : 120V to 600V Max. charging / discharge power : 12000W Max. charging current / Max. discharging current : 36A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 270V to 480V /3/N/PE | 220/380V; 230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 12000VA Max. apparent power : 12000VA Rated grid output current (@230V) : 17.4A Max. grid output current : 19.2A AC Input Rated grid voltage : 3/N/PE | 220/380V;230/400V;240/415V Rated apparent power : 24000W Max. input apparent power from grid : / Rated input curent from grid : / Max. input current from grid : 34.8A EPS Output Nominal output voltage : 3/N/PE | 220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 12000VA Max. output apparent power : / Peak output apparent power : 2 times of rated power | 10s Max. output current : 17.4A Max. switch time : ＜10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.9%/98.4% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 545*465*205 Device weight : 24.5Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : / Standby consumption : / Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/5G/Bluetooth Other communication : / Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/VDE 4105/VFR 201/ G98/G99/G100/CEI 0-21/NEN Warranty : 12 years

Read more less

Compatible Products Hanchu High Voltage Battery 5.12kWh Hanchu High Voltage Battery 5.12kWh - BMS Hanchu High Voltage Battery 2.7kWh Hanchu High Voltage Battery 2.7kWh - BMS Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP66 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems. PV Input Max. PV array power : 9000Wp Max. input voltage : 1100V MPPT voltage range / rated input voltage : 150V to 950V/630V Min. input voltage / start voltage : 60V/180V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 20A Max. short-circuit current per MPP tracker : 30A Battery Input Nominal battery voltage : / Battery voltage range : 120V to 600V Max. charging / discharge power : 6000W Max. charging current / Max. discharging current : 36A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 270V to 480V /3/N/PE | 220/380V; 230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 6000VA Max. apparent power : 6000VA Rated grid output current (@230V) : 8.7A Max. grid output current : 9.6A AC Input Rated grid voltage : 3/N/PE | 220/380V;230/400V;240/415V Rated apparent power : 12000W Max. input apparent power from grid : / Rated input curent from grid : / Max. input current from grid : 17.4A EPS Output Nominal output voltage : 3/N/PE | 220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 6000VA Max. output apparent power : / Peak output apparent power : 2 times of rated power | 10s Max. output current : 8.7A Max. switch time : ＜10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.5%/98.2% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 545*465*205 Device weight : 24.5Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : / Standby consumption : / Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/5G/Bluetooth Other communication : / Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/VDE 4105/VFR 201/ G98/G99/G100/CEI 0-21/NEN Warranty : 12 years

Read more less

What's more, the DuraCharger measures the amount of energy which would ordinarily return to the grid and diverts it to your EV instead. Meanwhile, this 7kW home charger is designed to sync seamlessly with the Duracell Energy inverter and battery with a common operating platform to help optimise your energy consumption and avoid wastage. Key features: Innovative AC electric vehicle charger Compatible with your home solar installation Engineered to take advantage of variable tariffs for grid charging Tethered with 4m type-2 charging cable Control remotely with the Duracell Energy app Single-phase Ingress protection: IP55 Rated power: 7.4kW Dimensions: 250mm (W) x 341mm (H) x 85mm (D) Weight: 3.2kg Three-year warranty Duracell EV (1P-T) 7kW-T

Read more less

Part No: X1-HYBRID-G4-5.0 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter and Charge controller range This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Please note Segen are currently stocking the G4-D version which is not compatible with the Matebox. Price reduced from £725.30 on 24/10/2024 Supplier Part No:X1 G4- Hybrid 5.0 DWeight:28 kgRated Power:5,000 WMin PPT Voltage:125 VMax PPT Voltage:550 VDC Startup Voltage:125 VDC Shutdown Voltage:125 VMax Input Voltage:600 VMax DC Power:7,500 WMax AC Power (5 Minutes):5,500 WSurge AC Power (1 Second):5,501 WMax DC Current:28 AMax DC Inputs:2Has DC Fuses:0Connector:SUNCLIX  Included Connectors:2Euro Efficiency:97 %Transformer:NoneMPPT Quantity :2Has Integrated DC Switch:NoWarranty:5 years

Read more less

Part No: SUN-HV-5.12-BATT Storage Systems - Li-ion Battery Pack Please note that this is a singular part, please use SUN-HV-61.44 or SUN-HV-20.48 Supplier Part No: HV 5.12kWh Battery (Black) Weight: 44 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5120 W Maximum Discharge Rate (5 Minutes): 5120 W Surge Discharge Rate (15 Seconds): 5120 W Maximum Charge Rate (5 Minutes): 5120 W

Read more less