INVERTERS FOR SOLAR / BATTERY STORAGE

Brand Victron Energy Manufacturer Part Number CIP136125010 Warranty 5 Years Appr. Voltage Drop 90 mV Cold Resistance 0.4    

Read more less

 Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).  Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only.   Brand Victron Energy Manufacturer Part Number ORI121222110 Input Voltage Range 8-17V Under Voltage Shutdown 7V Under Voltage Restart 7.5V Nominal Output Voltage 12.2V Output Voltage Adjust Range 10-15V Short Circuit Output Current 40A Cont. Output Power at 25°C 280W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

 Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI481224110 Input Voltage Range 32-70V Under Voltage Shutdown 28V Under Voltage Restart 30V Nominal Output Voltage 12.2V Output Voltage Adjust Range 10-15V Short Circuit Output Current 50A Cont. Output Power at 25°C 280W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Flexible charge algorithm Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC115110420 GTIN 8719076049852 Battery Voltage 12 / 24 / 48V Auto Select (software tool needed to select 36V) Rated Charge Current 100A Nominal PV Power, 12V 1450W Nominal PV Power, 24V 4350W Max. PV Short Circuit Current 70A Maximum PV Open Circuit Voltage 150V absolute maximum coldest conditions | 145V start-up and operating maximum Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Can Protection Category IP43 (electronic components), IP22 (connection area) Dimensions H216 x W295 x D103mm Weight 3Kg Warranty 5 Years

Read more less

This unit has the UK plug. Features of the Phoenix Inverter 24/1200 VE.Direct VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Monitor, operate & control your system VictronConnect lets you get live status information and configure your Phoenix Inverter 24/1200 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle. The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.   Brand Victron Energy Manufacturer Part Number PIN242121400 gtin 8719076056119 Voltage 24V Cont. Output Power at 25°C 1200VA Peak Power 2200W Output AC Voltage 230V Efficiency 91% Protection Category IP21 Dimensions H117 x W232 x D327mm Weight 7.4Kg Warranty 5 Years Bluetooth Enabled No Plug Type UK Country of Manufacture China

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP242300001 Voltage 24 Transfer Switch (A) 16 or 50 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 94% Zero Load Power (W) 20 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 4 (12 V and 24 V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 18 Warranty 5 Years Country of Manufacture India

Read more less

Brand Victron Energy Manufacturer Part Number SHU102050200 Warranty 5 Years

Read more less

MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Real-time data display options Color Control GX or other GX devices: see the Venus documents on our website. A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC115045222 GTIN 8719076053033 Battery Voltage 12/24/48V Auto Select (software tool needed to select 36V) Rated Charge Current 45A Nominal PV power 12V: 650W / 24V: 1300W / 36V: 1950W / 48V: 2600W Max. PV short circuit current 50A Maximum PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Maximum efficiency 98% Charge Algorithm multi-stage adaptive (eight pre-programmed algorithms) Data Communication Port VE.Direct Protection Category IP43 (electronic components), IP22 (connection area) Dimensions H130 x W186 x D70mm Weight 1.25Kg Warranty 5 Years

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer          Solis Phases            1 Phase Power Rating               kW1.5 Inverter Type              String Inverter Built in DC               Yes No. of MPPT            1 Built in Communication            Optional Commodity Code              85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI482428110 Input Voltage Range 32-70V Under Voltage Shutdown 28V Under Voltage Restart 30V Nominal Output Voltage 24.2V Output Voltage Adjust Range 20-30V Short Circuit Output Current 30A Cont. Output Power at 25°C 320W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.   Brand Victron Energy Manufacturer Part Number PMP123021010 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

Read more less

FeaturesVE.Direct communication portThe VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)   Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms       Proven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.DC connection with screw terminals No special tools needed for installation.   GTIN 8719076055044 Voltage 12V Cont. output power at 25°C 500VA Peak Power 900W Output AC Voltage 230V Efficiency 90% Bluetooth Enabled No Plug Type UK Protection Category IP21 Dimensions H86 x W172 x D275mm Weight 13.9Kg Warranty 5 Years Country of Manufacture China

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer.        Solis Phases.         1 Phase Power Rating        kW2.5 Inverter Type.       String Inverter Built in DC.        Yes No. of MPPT.     1 Built in Communication.        Optional Commodity Code.        85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

It incorporates 4.3-inch LCD touch screen for monitoring and control.   Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the web interface to display different light effects based on the current state (disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance.    GTIN 8719076051305 Input Voltage Range 170 – 265V AC Rated Charge Current 32A / phase Nominal Power 22kW Current Output Range 6 – 32A Data Communication Modbus TCP over WIFI Protection Category IP44 Dimensions H390 x W300 x D150mm Weight 3Kg Warranty 5 Years  

Read more less

Part No: FE-EPS-BOX-SP Storage Systems - Accessory

Read more less

Manufacturer Code: GEN-LB-EU 7K Order Code: LUX-HYPA-7.0KW Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Introduction Designed for homeowners seeking reliable and efficient energy storage, the Luxpower’s single phase hybrid inverter delivers optimal solar energy use with high PV input and intelligent time-of-use charging. With advanced energy management features, it intelligently adapts to fluctuating energy demands, delivering both cost savings and energy independence. Its advanced PV input and parallel capacity allow for efficient power distribution, whether for immediate use or storage. The intuitive monitoring system gives you full control over your energy consumption, and with built-in backup capabilities, your home stays powered even during grid outages—ensuring energy security day and night. Key Features 2 MPPTs, Max. PV input 12kW Max. charging and discharging current: 146A Supports up to 10pcs in parallel for on/off grid Time of Use and weather optimisation charge for e-bill reduction PV Input Max. PV array power : 12000W Max. input voltage : 600V MPPT voltage range / rated input voltage : 120-500V/360V Min. input voltage / start voltage : 140V No. of independent MPPT trackers / strings per MPPT input : 2 | (2:2) Max. input current per MPP tracker : 25A Max. short-circuit current per MPP tracker : 34A Battery Input Nominal battery voltage : 48V Battery voltage range : 40-60V Max. charging / discharge power : 7000W Max. charging current / Max. discharging current : 146A Battery type : Lithium-ion/Lead-Acid AC Output AC voltage range / Nomlnal AC voltage : 180-270V/230V Rated AC grid frequency : 50/60Hz Rated apparent power : 7000W Max. apparent power : 7000W Rated grid output current (@230V) : 30.43A Max. grid output current : 30.43A AC Input Rated grid voltage : 230V Rated apparent power : 7000W Max. input apparent power from grid : 13800W Rated input curent from grid : 30.43A Max. input current from grid : 60A EPS Output Nominal output voltage : 230V Nominal output frequency : 50/60Hz Rated apparent power : 7000W Max. output apparent power : 7000W Peak output apparent power : 14000W (for 0.5s) Max. output current : 30.4A Max. switch time : <20ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.50% Max. battery to load efficiency : 94% General Data Dimensions (W*H*D) (mm) : 536*556*290mm Device weight : 42.64 kg Operating temperature range : -25C ~ +60C Noise emissions (typical) : <50 dB Standby consumption : <20W Degree of protection (as per lEC 60529) : IP65 / NEMA 4X Features User interface : Touch color screen | RS485/WiFi/CAN Communication with BMS : CANBUS and RS485 Communication with meter : Eastron meters | Baud rates: 2400bps / 19200bps Communication with portal : Other communication : RS485 / CAN / WiFi Communication : Integrated power control / Zero export control : Certifications : G99 | G100 | NRS 097 Warranty : 12 years  

Read more less

Manufacturer Code: HESS-HY-T-15K Order Code: HC-15kW 3 Phase Controller Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP65 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems.

Read more less

  5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.

Read more less

Key Features of the Victron 130W Solar Panel: 130W Power Output: Ideal for charging 12V or 24V battery systems, this panel provides consistent, efficient power output to meet your energy needs. High Efficiency: Built with high-quality monocrystalline solar cells, the Victron 130W Solar Panel ensures superior energy conversion, even in low-light conditions. Durable Construction: Engineered to withstand harsh environments, this panel features a rugged aluminum frame, tempered glass, and weather-resistant components for long-lasting durability and reliable performance. Compact and Lightweight: Its slim design makes it easy to install and perfect for spaces with limited installation options. The lightweight construction ensures easy transport and mounting. Versatile Compatibility: Compatible with Victron’s entire range of charge controllers and inverters, offering a seamless integration for off-grid solar setups. Corrosion-Resistant: With its corrosion-resistant frame and materials, this panel is built to endure the elements, even in coastal or humid environments. Applications of the 130W Victron Solar Panel: RVs, Boats, and Off-Grid Living Backup Power Systems/li> Remote Outdoor Activities and Campsites Small Solar Power Systems CCTV Towers With the Victron 130W Solar Panel, you can rely on a durable, efficient, and eco-friendly power solution that meets your energy demands, while helping you reduce your carbon footprint. Invest in a sustainable energy source today, and enjoy reliable power for years to come. Brand: Victron Energy Model: SPM041301200 Panel Quantity: 1 x 130W Solar Array Size: 130W Rated Power: 130W Voltage: 22.83 Type: Rigid Cell Type: Monocrystalline Connector: MC4 Dimensions: 1200 x 668 x 30mm Maximum System Voltage: 1000V Number of Cells in Series: 36

Read more less

FeaturesA truly innovative batteryThe AGM Super Cycle batteries are the result of recent battery electrochemistry developments.The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge.Exceptional 100% depth of discharge (DoD) performanceTests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles.The tests consist of a daily discharge to 10,8V with I = 0,2C20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C20.The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery.We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60- 80% DoD is expected.Smaller and lighterAn additional advantage of the new chemistry is a slightly smaller size and less weight compared to our standard deep cycle AGM batteries. Low internal resistance The internal resistance is also slightly lower compared to our standard deep cycle AGM batteries.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 6kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 6kW Max current: 26A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 5kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 5kW Max current: 21.7A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

Part No: SOL-METER-1PH-CT1 Display - Power Management ACR10R16DTE Single phase meter for Export Limitation with Solis 1-phase inverters. Comes with 120A CT. Meter allows for full 24 hour Consumption Monitoring. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems.  

Read more less

Leading Features:• Max. efficiency 97.7%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• 2 MPPT design with precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer      Solis Phases       1 Phase Power Rating        kW3 Inverter Type       String Inverter Built in DC        Yes No. of MPPT        2  Built in Communication        Optional Commodity Code       85044085 Dimensions (mm) (H x W x D)      543 x 310 x 160

Read more less

With the LCD user interface an overview of all important energy flows of inverter and load is provided. PV energy can be used more efficiently , thereby significantly increasing self-consumption. Additionally, PV feed-in power is going to be limited in some countries. Energy management with the Solis export power manager allows for higher self-consumption and efficient use of the locally generated PV power. This is for single phase solis inverters. Simultaneously monitor the operating data of the 80 x Solis inverters, saving the cost of multiple monitoring systems. Each of the inverters connected can be different models. The secondary current of the EPM for CT clamps is 5A meaning it is much easier to get a range of CT clamps for your site (CT clamps not included with EPM). Manufacturer          Solis Accessory Product Type           Power Management Commodity Code           85437090 Dimensions (mm) (H x W x D)276 x 364 x 114

Read more less

The dual input section containing two independent Maximum Power Point Tracking (MPPT) allows optimal energy harvesting from two sub-arrays oriented in different directions. The TRIO features a high speed and precise MPPT algorithm for real power tracking and improved energy harvesting. NOTE: If installing a PV system using TRIO in North America please verify that the selected PV module is listed for use in 1000Vdc systems in accordance with local electrical codes. HIGHLIGHTS • True three-phase bridge topology for DC/AC output converter• Transformerless topology• Each inverter is set on specific grid codes which can be selected in the field• Detachable wiring box to allow an easy installation• Wide input range• ‘Electrolyte-free’ power converter to further increase the life expectancy and long term reliability Manufacturer        Solis Accessory Product Type          Power Management Commodity Code          85437090 Dimensions (mm) (H x W x D)364 x 276 x 114

Read more less

The Sunsynk 20kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 20000W. This three-phase inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty  

Read more less

Details The Sunsynk 8kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 8000W. This three-phase inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 422mm (W) x 702mm (H) x 281mm (D) Weight: 47.5kg Rated IP65 for ingress protection Five-year standard warranty  

Read more less

The X3 FORTH features a huge nine MPPTs while the 150% oversized PV power can help maximise your power yield. Its ingress protection rating of IP66 means it's highly resistant to dust and water damage so it's ideal for situating either internally or externally. Meanwhile, smart features such as the night-time power compensation and advanced heat dissipation improve its longevity and running costs. Key features Highly efficient three-phase inverter designed for commercial applications Nine MPP trackers, each with two strings Easy to install and set up 150% PV oversizing input; 110% overloading output 180~1000Vdc MPPT voltage range Inbuilt export power control  Remote setting and upgrading  Supports Smart I-V curve diagnosis Fuse-free design with smart string current monitoring AC terminal temperature detection and optional AFCI protection for safety Night-time reactive power compensation  Smart air cooling to extend the lifetime of the fan Advanced heat dissipation helps make the system compact and lightweight Maximum efficiency: 98.6%  Ingress protection: IP66 Dimensions: 985mm x 660mm x 327.5mm Weight: 83kg Five-year standard warranty

Read more less

Fox ESS AI Link The parallel function (installing multiple units on a single site).  Require an additional EMS.

Read more less

Key features: Hybrid inverter for use with the IES battery and battery management system to create an all-in-one system Easy, plug-and-play installation Modular design means battery capacity is expandable up to four batteries Intelligent functionality such as AI-ready forecasting of solar generation and home consumption, and micro-grid feature to support on-grid and off-grid operation Intelligent load management for heat pumps and EV chargers Three MPP trackers with 1 string per tracker Maximum 200% oversize and 200% PV input power Maximum 20A DC single-string input current to support high-power solar panels Low start-up voltage offers longer operation time Inbuilt shadow tracking function Maximum charge/discharge current up to 50A Back-up functionality with switchover time under10ms (UPS level), up to 200% EPS output for 10s Ingress protection rating: IP66 Weight: 26.4kg Five-year standard warranty

Read more less

Part No: SUN-50.0-3PH Storage Systems - Hybrid Inverter The Sunsynk 50kW three phase high voltage hybrid Inverter is the ideal commercial inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.   Supplier Part No:SYNK-50K-SG01HP3-EUWeight:75 kgRated Power:50,000 WMin PPT Voltage:150 VMax PPT Voltage:850 VDC Startup Voltage:180 VDC Shutdown Voltage:150 VMax Input Voltage:1,000 VMax DC Power:65,000 WMax AC Power (5 Minutes):50,000 WSurge AC Power (1 Second):55,000 WMax DC Current:144 AMax DC Inputs:8Has DC Fuses:0Connector:MC4  Included Connectors:0Euro Efficiency:97 %Transformer:NoneMPPT Quantity :4Has Integrated DC Switch:YesWarranty:5 years

Read more less

Technical Features Efficiency (max.) inverter: 98% Efficiency (EU) inverter: 97.5% MPPT voltage range (VDC): 200-850V Input current (max.): 16A Input voltage (VDC max.): 1000B DC Power (max.): 16kW Manufacturers warranty: 5 years Nominal voltage: 600V Inverter protection class: IP66 Rated capacity: 10kW Battery technology: Lithium ion Promotion.        Solis Pylon Combo Manufacturer.      Solis Inverter Type.       Hybrid Inverter No. of MPPT.         4 Commodity Code.         85044086 Dimensions.      (mm) (H x W x D)563 x 546 x 235

Read more less

Product features Mains connection: 3-phase AC output: 8 kVA 8 kW emergency power output via separate output MPP tracker: 4 with 1 string output each Max. short circuit current per MPPT: 24 A Max. input current: 16 A Communcations: CAN, RS485, Wi-Fi 3-phase smart meter with 3 current transformers included Incl. WiFi+LAN kit Protection category: IP66 Warranty: 5 years Manufacturer.     Solis Phases.     3 Phase Power.     Rating kW8 Inverter Type.      Hybrid Inverter No. of MPPT.     4 Commodity Code.       85044086 Dimensions.       (mm) (H x W x D)496 x 596 x 230  

Read more less

  Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.

Read more less

Compatible Products Hanchu High Voltage Battery 9.4kWh Hanchu High Voltage Battery 9.4kWh - BMS   Ultra Performance Exceptional Efficiency Achieves up to 98.8% peak efficiency, maximising the conversion of generated energy into usable power and significantly reducing energy costs. Robust Power Handling Supports up to 110% AC output overloading and up to 120% back-up output overloading for 60 seconds, ensuring reliable performance even during peak demand. Advanced Multi-MPPT Support Equipped with 4 MPPTs, enabling optimal solar energy capture across multiple roof orientations and shading conditions to maximise overall solar utilization. Reliable Operation Ultra-Fast Switching Time With EPS switching time of less than 20 milliseconds, it ensures continuity of critical operations without interruption during power outages. Broad Voltage Compatibility Supports an extensive battery voltage range from 135V to 750V, making it compatible with various high-voltage battery systems for greater versatility. Comprehensive Safety Protection Offers built-in surge protection, insulation resistance monitoring, and multi-layered safeguards against over-temperature and residual currents, ensuring protection for both the equipment and the premises. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Installation The horizontal design and quick plug-in terminals enable fast and convenient installation, minimising labour time and reducing complexity. Advanced Connectivity Offers simple configuration through WiFi via the iESS platform, streamlining setup and integration into existing systems. PV Input Max. PV array power : 37.5kW Max. input voltage : 1000V MPPT voltage range / rated input voltage : 200-850V Min. input voltage / start voltage : 135V No. of independent MPPT trackers / strings per MPPT input : 4 Max. input current per MPP tracker : 30A Max. short-circuit current per MPP tracker : 40A Battery Input Nominal battery voltage : / Battery voltage range : 135-750V Max. charging / discharge power : 25000W Max. charging current / Max. discharging current : 100A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 25.0kW Max. apparent power : 27.0kVA Rated grid output current (@230V) : / Max. grid output current : 42.0A AC Input Rated grid voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated apparent power : 25.0kW Max. input apparent power from grid : 30.0kVA Rated input curent from grid : / Max. input current from grid : / EPS Output Nominal output voltage : 3L/N/PE;220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 25.0kW Max. output apparent power : 27.5kVA Peak output apparent power : 30kVA | 60s Max. output current : 42.0A Max. switch time : ＜20ms Efficiency MPPT efficiency : 98.80% Euro efficiency / Max. efficiency : 98.30% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 800*620*300 Device weight : 76.0Kg Operating temperature range : -30℃~+60℃ Noise emissions (typical) : ＜50dB Standby consumption : ＜15W Degree of protection (as per lEC 60529) : IP65 Features User interface : OLED&LED&APP Communication with BMS : / Communication with meter : / Communication with portal : / Other communication : / Communication : RS485/CAN/WiFi/LAN(Optional) Integrated power control / Zero export control : Integrated/Integrated Certifications : IEC 62109/EN 61000/EN 50549-1/NTS/VDE-4105/G99/G100/CEI/NRS 097/CEI 0-21/NEN Warranty : 12 years

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Compatible with: ECS2900  Compatible with: ECS4100  Compatible with: ECS4300  Compatible with: ECS4800  Compatible with: HV2600  IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97%   CT Clamps and WiFi stick are included in the box. A second CT will be required if there's another generator set (i.e PV, wind or other). A meter will be required for >30m distance between inverter and incoming power connection point. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. Supplier Part No: FE-H1-3.0-G2 Weight: 22 kg Rated Power: 3,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,000 W Surge AC Power (1 Second): 3,300 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Compatible Products  Hanchu Single Phase Hybrid Inverter 3.68kW Hanchu Single Phase Hybrid Inverter 5.0kW Hanchu Single Phase Hybrid Inverter 6.0kW   Unparalleled Safety Premium Lithium Iron Phosphate Cells Features high-quality LFP cells from leading suppliers, designed with advanced safety features at the cell level to ensure maximum reliability and peace of mind. Built-in Heat Dissipation System Includes an advanced cooling system to maintain safe battery operation. Advanced BMS Protection Equipped with a built-in Battery Management System (BMS) that ensures comprehensive safety through real-time monitoring, fault detection, and lifespan optimisation. Flexible and Scalable Compact and Minimalist Design Features a sleek, lightweight design that is smaller and lighter compared to similar products, making it ideal for installation in limited spaces without specific spatial requirements. Scalability Supports the connection of up to 16 batteries in parallel, meeting a wide range of user requirements and allowing for simple addition of batteries anytime. Easy and Quick Installation Features user-friendly designs such as pre-assembled wiring harnesses and quick-connect installation, simplifying the setup process and reducing installation time. Smart Energy Management (when linked to Hanchu Controller) Smart Monitoring with iESS: The intelligent iESS platform continuously monitors battery performance, employing both hardware and software solutions to ensure operational safety and efficiency. Octopus Tariff Integration: Compatible with Auto Octopus energy pricing, reducing energy costs by utilising cheaper rates. Smart Weather Compensation Automatically adjusts settings in response to weather conditions to maximise energy efficiency.   HANCHU ESS - 3.6KWH LOW VOLTAGE BATTERY - CLICK HERE FOR FEATURES 12 Years Warranty On All Hanchu Products. All Hanchu products are 12 years warranty with an incredible RMA National service to strengthen the product even more. Technical Specifications Cell Type: LFP Nominal Energy: 3.68kWh Maximum Parallel Number: 16 Nominal Voltage: 51.2V Operating Voltage Range: 43.2-57.6V Dimension (W*D*H) (mm): 484*151*335 Weight: 30.5Kg Charging Temperature: From 0 to 50℃ Discharging Temperature: From -10 to 60℃ Depth of Discharge: 95% DoD Nominal Charge: 72A Discharge Current: 72A Ingress Protection Degree: IP65 Cooling Type: Natural convection Humidity: ≤95% Communication: CAN / RS485 / WiFi / Bluetooth Battery Safety: IEC 62619 / CE Transportation Certification: UN38.3 Warranty: 12 years

Read more less

Part No: SOLAX-BMS-PB-G2 Storage Systems - Accessory BMS-Parallel Box G2 This BMS is ideal for use with the X1 and X3 Hybrid Inverters. It allows you to double the storage capacity with T30 & T58 batteries. Features  Increase the capacity of ESS Extend the working hours of ESS Dual-module in case Prolong the batteries life due to the alternate use of dual-module IP55 T58 X1 – Single Phase: 2, 4 or 6 Triple Power 5.8kWh batteries. Requires Master (HV-T-BAT-H-58-MASTER-V2 ) X3 – Three Phase: 4, 6, 8 Triple Power 5.8kWh batteries. Requires Master (HV-T-BAT-H-58-MASTER-V2 ) T30 X1 – Single Phase: 2, 4 or 6 Triple Power 3.0kWh batteries. Requires BMS (MC0600 & HV10230) X3 – Three Phase: 4, 6, 8 Triple Power 3.0kWh batteries. Requires BMS (MC0600 & HV10230) For further configuration information please refer to the installation manual BMS Parallel Box II G2 Installation Video Please note: Unlike G1 version of BMS-Parallel Box this G2 now requires T58 Master battery, meaning it is easier to retro-fit to existing systems A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product.   Supplier Part No: SOLAX-BMS-PB-G2 Weight: 8.7 kg

Read more less

The X3-ULTRA is a versatile 3ph hybrid inverter that includes inversion, solar charging, and battery charging. The X3 ULTRA series can be used with different capacities of SolaX battery. The X3 Ultra can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. For G100 Applications, please contact SolaX to perform a software update remotely when the product is installed. AC attributes Max power: 22000W Max current: 31.9A Number of phases: 3 DC attributes Number of MPPT 3 V range of MPPT 160-950V Max power 40kW Max voltage 1000V Start up voltage 200V System Max efficiency 99.7% IP rating IP66 Weight 47kg Dimensions 696 x 529 x 240 mm CommunicationWarranty 5 years Key features Max. 36A DC input per MPPT 3 MPPT, 6 Strings 100% Unbalanced Output AI-Driven Energy Management

Read more less

Technical Features  4 Integrated MPPTs and 8 strings with string current capacity of up to 20A Backup port supports 1.6 times/2 seconds overload Supports maximum 96kW usable PV input power Enables peak shaving control in both "self-use" and "generator" modes Compatible with a wide voltage range to accommodate various batteries Increased battery protection and operation features to extend battery life Allows parallel operation of up to 6 units for both on-grid and off-grid application Generator connectivity with multiple input methods and automatic generator On/Off control Maximum charge/discharge current of up to 140A/70A+70A on two independently controlled battery ports

Read more less

Part No: SOLAX-BMS-G2-HV-T58-6-34.8 Storage Systems - Li-ion Battery Pack Package of: Solax BMS Parallel Box and SolaX Triple Power 5.8 Master and Slave Batteries The Solax BMS Parallel Box is an advanced battery management system that enables seamless parallel connection of multiple batteries, ensuring efficient energy utilisation and enhanced performance. With its cutting-edge technology and robust design, this parallel box is the ideal choice for residential and commercial applications. Possible System Configurations T58 X1 – Single Phase: 2, 4 or 6 Triple Power 5.8kWh batteries.  X3 – Three Phase: 4, 6, 8 Triple Power 5.8kWh batteries.  BMS Parallel Box II G2 Installation Video Please note: Unlike G1 version of BMS-Parallel Box this G2 now works with T58 Master batteries, meaning it is easier to retro-fit to existing systems A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product. Weight: 441.9 kg Battery Type: Lithium Ion Nominal Energy: 35200 Wh Depth of discharge: 90.00 % Voltage: 690 V Continuous Discharge Rate (Normal Use): 17250 W Maximum Discharge Rate (5 Minutes): 3500 W Surge Discharge Rate (15 Seconds): 24000 W Maximum Charge Rate (5 Minutes): 3500 W

Read more less

Fox ESS H3 Pro 15.0 three-phase hybrid inverter 3 MPP tracker Full three-phase emergency power capability Two battery inputs for even easier connection of high-voltage batteries  Modern and functional design Remote monitoring 10-year warranty (5 years as standard and extendable to 10 years through registration) Smart meter and WiFi dongle are included in the scope of delivery Note: For specific battery sizing, please see the attached Battery Sizing Guide below   Supplier Part No: FE-H3-PRO-15.0 Weight: 52.5 kg Rated Power: 15,000 W Min PPT Voltage: 160 V Max PPT Voltage: 1,000 V DC Startup Voltage: 160 V DC Shutdown Voltage: 1,000 V Max Input Voltage: 1,000 V Max DC Power: 22,500 W Max AC Power (5 Minutes): 15,000 W Surge AC Power (1 Second): 16,500 W Max DC Current: 32 A Max DC Inputs: 6 Has DC Fuses: 1 Connector: MC4   Included Connectors: 3 Euro Efficiency: 97.3 % Transformer: N/A MPPT Quantity : 6 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: SE-8000-3PH-NET Inverters - Main Units Rating: 8,000W Phases: 3 Solar Edge 8000 3phase inverter with Set APP function (no display) SE8K-RW0TEBNN4 THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMISERS TO FUNCTION. The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions. UK only: This inverter has been tested and certified according to G98 or G99, but only with the most recent Firmware version. Please update the inverter firmware during SetAPP phone app commissioning process as per the per Installation Manual. Please note: This inverter does not have a display. It is a new Comms Board version and set up and commissioning need to be done using Solar Edge SetAPP mobile application.   Supplier Part No: SE8K-RW0TEBEN4 Weight: 16.4 kg Rated Power: 8,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 10,800 W Max AC Power (5 Minutes): 7,000 W Surge AC Power (1 Second): 7,000 W Max DC Current: 13.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: SE-7000-3PH-NET Inverters - Main Units Rating: 7,000W Phases: 3 Solar Edge 7000 3phase inverter with Set APP function (no display) SE7K-RW0TEBNN4 THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMISERS TO FUNCTION. The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions. UK only: This inverter has been tested and certified according to G98 or G99, but only with the most recent Firmware version. Please update the inverter firmware during SetAPP phone app commissioning process as per the per Installation Manual. Please note: This inverter does not have a display. It is a new Comms Board version and set up and commissioning need to be done using Solar Edge SetAPP mobile application.   Supplier Part No: SE7K-RW0TEBEN4 Weight: 16.4 kg Rated Power: 7,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 9,450 W Max AC Power (5 Minutes): 7,000 W Surge AC Power (1 Second): 7,000 W Max DC Current: 12 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: SE-3680H-NET Inverters - Main Units Rating: 3,680W Phases: 1 SolarEdge Home Wave Inverter- Network Ready  Optimized Installation With HD-Wave Technology Features: Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer strings Advanced safety feature - integrated arc fault protection   Supplier Part No: SE3680H-RW000BEN4 Weight: 7.8 kg Rated Power: 3,680 W Min PPT Voltage: 0 V Max PPT Voltage: 0 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 7,360 W Max AC Power (5 Minutes): 3,680 W Surge AC Power (1 Second): 3,680 W Max DC Current: 10.5 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 2 Euro Efficiency: 98.8 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less

Part No: SE-3000H-NET Inverters - Main Units Rating: 3,000W Phases: 1 SolarEdge Home Wave Inverter- Network Ready  Optimized Installation With HD-Wave Technology Features: Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer strings Advanced safety feature - integrated arc fault protection   Supplier Part No: SE3000H-RW000BEN4 Weight: 7.8 kg Rated Power: 3,000 W Min PPT Voltage: 0 V Max PPT Voltage: 0 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 6,000 W Max AC Power (5 Minutes): 3,000 W Surge AC Power (1 Second): 3,000 W Max DC Current: 9 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 2 Euro Efficiency: 98.8 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years

Read more less